BIKE SELECTOR

20 of 104 search results

Sort on:

The Öhlins racing design carpet. Perfect to set the right ambience for your garage, workshop or home. - Pile composition: 100% PA (Polyamide/nylon) BFC (Bulk Continuous Filament) yarn - Backing: 100 % vinyl black - Dimensions: 100cm x 220cm - Total thickness: 5 mm - Total weight: 5600 grams - Finished with vinyl boarders (approx. 2,5 cm) - 30° C washable, do not tumble-dry
Öhlins

Öhlins Racing carpet

#963178

Stock:Yes

- Front fork oil - Viscosity 98.0 Centistokes at 40° (similar to SAE 40W) - 1 liter. Compatible with telescopic, upside down / inverted and all Öhlins suspension products. This oil is mineral based and designed to reduce friction for less wear and oil contamination to give a longer service life to both suspension components and fork oil. Especially designed to reduce cavitation (foaming). When suspension is worked hard foaming can become a thing. Foaming induces air/gasses in the fluid which is compressible. Since foaming reduces damping capacity, a cavitation resistant damping fluid is important to keep the damping system working correctly. Note: To place viscosity into perspective, the viscosity of water is approximately 1 centistoke at 20°C.
Öhlins

Öhlins, High performance suspension fluid #20. 1 liter

#962117

Stock:Yes

- Black springs - Clear body - Piston diameter 36mm - S: Single tube - E: Emulsion type shock absorber - Length: 311 mm - Stroke: 77 mm - Rate N/mm: 25 N/mm - Position: rear - Mounted spring: 00280-21 - Packaging unit: pair - ABE approved. These STX36's are designed to replace the dual shock absorbers on Touring models for comfort and improved rideability of your bagger.
Öhlins

Öhlins, STX36 Twin rear shock absorber set. 311mm

#961798

Stock:Yes

- Black springs - Clear body - S: Single tube body - Piston diameter: 36mm - E: Emulsion type shock absorber - Length: 360.5 mm - Stroke: 101 mm - Rate N/mm: progressive 15-24 N/mm - Position: rear - Mounted spring: 00480-01 - Packaging unit: pair - ABE approved depending on model. The STX36 is a shock that's been around the block and it paid it's dues when it comes to performance and durability. Especially for the cruiser market when taking riding a step up, the STX36 is an excellent investment when suspension characteristics are important to you.
Öhlins

Öhlins, STX36 Twin rear shock absorber set. 360mm

#961832

Stock:Yes

- Black springs - Clear body - S: Single tube body - Piston diameter: 36mm - P: Monotube high pressure gas type of shock absorber with external "piggy back" reservoir - R1: Adjustable rebound damping. Adjuster wheel above the end eye - C1: Adjustable compression damping. Adjuster wheel or slot on the reservoir - L: Adjustable length - Length: 340 +5/-5 mm - Stroke: 88 mm - Rate N/mm: 32 N/mm - Position: rear - Mounted spring: 66422-032 - Packaging unit: pair - ABE approved
Öhlins

Öhlins, STX36 Twin rear shock absorber set. 340mm

#961835

Stock:Yes

- Black springs - Clear body - S: Single tube body - Piston diameter: 36mm - E: Emulsion type shock absorber - Length: 305 mm - Stroke: 65 mm - Rate N/mm: 32 N/mm - Mounted spring: 21180-01 - Packaging unit: pair - ABE approved
Öhlins

Öhlins, STX36 Twin rear shock absorber set. 305mm

#961836

Stock:Yes

- Black springs - Clear body - S: Single tube body - Piston diameter: 36mm - E: Emulsion type shock absorber - Length: 340 mm - Stroke: 88 mm - Rate N/mm: 32 N/mm - Position: rear - Mounted spring: 21180-01 - Packaging unit: pair - ABE approved
Öhlins

Öhlins, STX36 Twin rear shock absorber set. 340mm

#961838

Stock:Yes

- Black springs - Black body - S: Single tube body - Piston diameter: 36mm - D: Monotube high pressure gas type shock absorber with internal reservoir in the main body - Length: 279 mm - Stroke: 42 mm - Rate N/mm: 26 N/mm - Position: rear - Packaging unit: pair - ABE approved. The STX36 is a shock that's been around the block and it paid it's dues when it comes to performance and durability. Especially for the cruiser market when taking riding a step up, the STX36 is an excellent investment when suspension characteristics are important to you.
Öhlins

Öhlins, STX36 Blackline rear shock absorber set. 279mm

#961851

Stock:Yes

- Black springs - Black body - S: Single tube body - Piston diameter: 36mm - D: Monotube high pressure gas type of shock absorber with internal reservoir in the main body - Length: 305 mm - Stroke: 68 mm - Rate N/mm: 33 N/mm - Position: rear - Mounted spring: 00281-66 - Packaging unit: pair - ABE approved
Öhlins

Öhlins, STX36 Blackline rear shock absorber set. 305mm

#961852

Stock:Yes

- Black springs - Black body - S: Single tube body - Piston diameter: 36mm - D: Monotube high pressure gas type of shock absorber with internal reservoir in the main body - R1: Adjustable rebound damping. Adjuster wheel above the end eye - L: Adjustable length - Length: 336 +10/-0 mm - Stroke: 89 mm - Rate N/mm: 32 N/mm - Position: rear - Mounted spring: 66422-032 - Packaging unit: pair - ABE approved
Öhlins

Öhlins, STX36 Blackline rear shock absorber set. 336mm

#961856

Stock:Yes

- Black springs - Black body - Piston diameter: 36mm - S: Single tube body - D: Mono type high pressure gas type shock with internal reservoir in the main body - Length: 305 mm - Stroke: 74 mm - Rate N/mm: 25 N/mm - Position: rear - Mounted spring: 00280-21 - Packaging unit: pair - ABE approved. These STX36's are designed to replace the dual shock absorbers on Touring models for comfort and improved rideability of your bagger.
Öhlins

Öhlins, STX36 Blackline rear shock absorber set. 305mm

#961857

Stock:Yes

- Black spring - Clear body - Piston diameter: 36mm - S: Single tube body - E: Emulsion type shock absorber - Length: 311 mm - Stroke: 79 mm - Rate N/mm: 26 N/mm - Position: rear - Mounted spring: 66420-026 - Packaging unit: pair - Not ABE approved. These STX36's are designed to replace the dual shock absorbers on Touring models for comfort and improved rideability of your bagger.
Öhlins

Öhlins, STX36 Blackline rear shock absorber set. 311mm

#961861

Stock:Yes

- Black springs - Clear body - S: Single tube body - Piston diameter: 36mm - D: Monotube high pressure gas type of shock absorber with internal reservoir in the main body - R1: Adjustable rebound damping. Adjuster wheel above the end eye - L: Adjustable length - Length: 325 +5/-5 mm - Stroke: 67 mm - Rate N/mm: 32 N/mm - Position: rear - Mounted spring: 21180-01 - Packaging unit: pair - ABE approved
Öhlins

Öhlins, STX36 Twin rear shock absorber set. 325mm

#961868

Stock:Yes

- Yellow springs - Clear body - S: Single tube body - Piston diameter: 36mm - P: Monotube high pressure gas type shock absorber with external "piggy back" reservoir - R1: Adjustable rebound damping. Adjuster wheel above the end eye - C1: Adjustable compression damping. Adjuster wheel or slot on the reservoir - L: Adjustable length - Length: 415mm +5/-5 mm - Stroke: 98 mm - Rate N/mm: Progressive 21-29 N/mm - Position: rear - Mounted spring: 66394-04 - Packaging unit: pair - ABE approved. The STX36 is a shock that's been around the block and it paid it's dues when it comes to performance and durability. Especially for the cruiser market when taking riding a step up, the STX36 is an excellent investment when suspension characteristics are important to you.
Öhlins

Öhlins, STX36 Twin rear shock absorber set. 415mm

#961870

Stock:Yes

- Black springs - Clear body - S: Single tube body - Piston diameter: 36mm - D: Monotube high pressure gas type shock absorber with internal reservoir in the main body - R1: Adjustable rebound damping. Adjuster wheel above the end eye - L: Adjustable length - Length: 336 +10/-0 mm - Stroke: 77 mm - Rate N/mm: progressive 16-26 N/mm - Position: rear - Mounted spring: 00480-02 - Packaging unit: pair - ABE approved. The STX36 is a shock that's been around the block and it paid it's dues when it comes to performance and durability. Especially for the cruiser market when taking riding a step up, the STX36 is an excellent investment when suspension characteristics are important to you.
Öhlins

Öhlins, STX36 Twin rear shock absorber set. 336mm

#961871

Stock:Yes

- Yellow springs - Clear body - S: Single tube body - Piston diameter: 36mm - P: Monotube high pressure gas type shock absorber with external "piggy back'' reservoir - R1: Adjustable rebound damping. Adjuster wheel above the end eye - C1: Adjustable compression damping. Adjuster wheel or slot on the reservoir - L: Adjustable length - Length: 360 +10/-0 mm - Stroke: 101 mm - Rate N/mm: progressive 15-24 N/mm - Position: rear - Mounted spring: 60480-11 - Packaging unit: pair The STX36 is a shock that's been around the block and it paid it's dues when it comes to performance and durability. Especially for the cruiser market when taking riding a step up, the STX36 is an excellent investment when suspension characteristics are important to you.
Öhlins

Öhlins, STX36 Twin rear shock absorber set. 360mm

#961830

Stock:Yes

- Black springs - Black body - S: Single tube body - Piston diameter: 36mm - D: Monotube high pressure gas type of shock absorber with internal reservoir in the main body - R1: Adjustable rebound damping. Adjuster wheel above the end eye - L: Adjustable length - Length: 305 +10/-0 mm - Stroke: 66 mm - Rate N/mm: 33 N/mm - Position: rear - Mounted spring: 00281-73 - Packaging unit: pair - ABE approved
Öhlins

Öhlins, STX36 Blackline rear shock absorber set. 305mm

#961853

Stock:Yes

- Black springs - Grey body - S: Single tube body - Piston diameter: 36mm - E: Emulsion type shock absorber - Length: 280 mm - Stroke: 68 mm - Rate N/mm: 22 N/mm - Position: rear - Mounted spring: 66420-022 - Packaging unit: pair - ABE in preparation. The STX36 is a shock that's been around the block and it paid it's dues when it comes to performance and durability. Especially for the cruiser market when taking riding a step up, the STX36 is an excellent investment when suspension characteristics are important to you.
Öhlins

Öhlins, STX36 Twin rear shock absorber set. 280mm

#961834

Stock:Yes

Gold anodized. Öhlins offers a high quality 43 mm Upside Down / inverted universal front fork for any ­custom builder that wants to give the bike supreme inverted ­suspension in the familiar Öhlins Racing design. The technology used is ­proven throughout the years and works perfectly in a whole range of custom applications. The fork allows tuning by allowing adjustment of spring preload, compression and rebound damping adjustment to best match the rider's preferences. Note: Does not include brake caliper or fender mounts for maximum adaptability. - Length 765 mm - Spring rate 12 N/mm - Fitted spring 08866-02 (MCS 963139) - Fully adjustable preload, compression & rebound. - Stroke 120 mm - Blackline design, with gold anodized finish - Top clamp diameter 50mm - Lower clamp diameter 54mm - Wheel axle diameter 32mm. Note: Does not include brake caliper or fender mounts for maximum adaptability. Note: Please contact Motorcycle Storehouse Tech Support if you want to add Öhlins 988984 KR8 Component Kit (upgraded triple tree set), for 14-up H-D Tourings, to your order. Tech Support can advise you on correct spring set-up for a specific rider weight and, if required, mods for Bagger Racing applications.
Öhlins

Öhlins, Universal USD 765mm 12N/mm front fork. Gold

#993834

Stock:Yes

Black anodized (Blackline). Öhlins offers a high quality 43 mm Upside Down / inverted universal front fork for any ­custom builder that wants to give the bike supreme inverted ­suspension in the familiar Öhlins Racing design. The technology used is ­proven throughout the years and works perfectly in a whole range of custom applications. The fork allows tuning by allowing adjustment of spring preload, compression and rebound damping adjustment to best match the rider's preferences. Note: Does not include brake caliper or fender mounts for maximum adaptability. - Length 765 mm - Spring rate 12 N/mm - Fitted spring 08866-02 (MCS 963139) - Fully adjustable preload, compression & rebound. - Stroke 120 mm - Blackline design, with gold anodized finish - Top clamp diameter 50mm - Lower clamp diameter 54mm - Wheel axle diameter 32mm. Note: Does not include brake caliper or fender mounts for maximum adaptability. Note: Please contact Motorcycle Storehouse Tech Support if you want to add Öhlins 988984 KR8 Component Kit (upgraded triple tree set), for 14-up H-D Tourings, to your order. Tech Support can advise you on correct spring set-up for a specific rider weight and, if required, mods for Bagger Racing applications.
Öhlins

Öhlins, Universal USD 765mm 12N/mm front fork. Black

#993835

Stock:No