Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 46 search results

Sort on:

Sort on:

'- Used to convert 2 single function LEDs, halogens or regular incandescent bulbs to dual function (dual 1157 style)
- Comes with 2 single input power wires and 4 output wires to operate 2 light lights, giving them dual function
- Run & stop, run & turn or high & low.
- Works for taillights, signals, markers, fender tip lights, LED accent lighting or 2 x 25 Watt driving lights
- Hard wired for universal applications
- No heat build-up issues

Badlands, Intensifier Module. 2 input 4 output

#513407

Stock:Yes

Superbright amber (yellow) light emitting LEDs that are sequential working, inside a chrome plated aluminum housing. Dimensions approx. 25mm thick x 90mm wide x 22mm high. Universal mount at handlebar or rear of bike through a 5/16" mounting hole.
Note: Requires three holes, per flame thrower, to be drilled in saddlebag for mounting screws and wiring.

Badlands, E-Z bolt-on 'Flame Throwers' turn signals

#513447

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513304

Stock:Yes

- Gives running light and brakelight function to rear turn signals
- Maintains turn signal function
- Load equalizer is built-in allowing the module to work with stock or any custom turn signals
- Plug 'n Play installation
Note: Module will work with CAN-bus controlled bikes only.

Badlands, Illuminator Plug 'n Play

#588885

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brake light function to turn signals and maintains turn signal function
- Load equalizer is built-in

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513316

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513306

Stock:Yes

Provides running light functions to the front turn signals for added visibility.
The built-in load equalizer prevents rapid flashing turn signals.

Badlands Indian Illuminator front turn signals (run/turn)

#567566

Stock:Yes

Used for rear turn signals only.
Used with non CAN-bus compliant LED turn signals.
Plug 'n Play installation.
Used to prevent rapid-flashing turn signal indicators and the BCM (Body Control Module) triggering trouble codes when non-compliant turn signals are installed.
Produces absolutely no heat due to solid state construction and will run emergency turn signal flashers for any length of time.
Dimensions: 8.5" (21.6cm) × 6.5" (16.5cm) × 1.25" (3.2cm).

Badlands, CAN-bus turn signal load equalizer III

#513462

Stock:Yes

'- Used with max 500 milliamps LEDs only
- Used to converts 2 single function LEDs (max 500 milliamps) to dual function (dual 1157 style)
- Same function as 513407 but requires less space, but works with LEDs with a maximum of 500 milliamps only
- Comes with 2 single input power wires and 4 output wires to operate 2 light lights, giving them dual function
- Run & stop, run & turn or high & low.
- Works for taillights, signals, markers, fender tip lights, LED accent lighting or 2 x 25 Watt driving lights
- Hard wired for universal applications
- No heat build-up issues

Badlands, Intensifier Module. 2 input 4 output. 500mA LEDs

#513303

Stock:No

- Self-cancels after 11 seconds
- Complete with 12-position male connector (compatible with OEM 68921-01D self canceling module) for plug 'n Play installation
- Works with momentary switches (if using latching switches, the button will need to be pressed again after the signal cancels in order to reset the module)
- Plug-in replacement for the stock turn signal canceller
- Press the turn signal button once and after approximately 10 seconds flashing it will automatically shut turn signal off
- Can manually cancel at each time, for fast lane change etc.
- To re-activate, simply push again
- Load equalizer allows running LEDs up to 70W per side
- Solid state flasher and emergency flasher mode are built-in
Note: Works on models with an aftermarket ignition module only.
Note 1: 2000-up H-D with the Delphi TSM/TSSM system run the ignition circuit through the OEM 12-pin security & self-canceling modules. This module will not fit earlier systems.

Badlands, self canceling turn signal module

#588883

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513311

Stock:Yes

- Gives running light and brake light function to rear turn signals
- Maintains turn signal function
- Load equalizer is built-in allowing the module to work with stock or any custom turn signals
- Plug 'n Play installation
Note: Module will work with CAN-bus controlled bikes only.

Badlands, CAN-bus Illuminator Plug 'n Play

#513457

Stock:Yes

Gives running light and brakelight function to rear turn signals and maintains turn signal function.
Load equalizer is built-in.
Hard wired.
For models with center taillight.
The bike must be flashed to remove the brake function from the taillight.
Note: Module will work with CAN-bus controlled bikes only.

Badlands, hard wired CAN-bus illuminator

#513454

Stock:No

Used for rear turn signals only.
Used with non CAN-bus compliant LED turn signals.
Plug 'n Play installation.
Used to prevent rapid-flashing turn signal indicators and the BCM (Body Control Module) triggering trouble codes when non-compliant turn signals are installed.
Produces no heat due to solid state construction and will run emergency turn signal flashers for any length of time.
Dimensions: 8.5" (21.6cm) × 6.5" (16.5cm) × 1.25" (3.2cm).

Badlands, CAN-bus turn signal load equalizer III

#513463

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513408

Stock:Yes

- With Deutsch 8-pin plug (Plug & Play)
- Plug-in replacement for the stock 68540-96 (Big Twin) and 68441-00 (XL) turn signal canceller
- Press the turn signal button once and after approximately 10 seconds flashing it will automatically shut turn signal off
- Can manually cancel at each time, for fast lane change etc.
- To re-activate, simply push again
- Load equalizer allows running LEDs up to 70W per side
- Solid state flasher and emergency flasher mode are built-in

Badlands, self canceling turn signal module

#513393

Stock:No

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in
- Module will work with 2000-up TSM and TSSM module/security systems.

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513313

Stock:Yes

Removes the incorporated brake function from the turn signals of 14-up CAN-bus Touring models so the turn signals will function as turn signals only.
Any regular taillight can be installed for traditional brake & taillight function.
Great for customs or for use with trailers.
- Removes brake light function from rear turn signals
- Allows the use of Amber rear turn signals
- Has a built-in Load Equalizer
- Plug-n-Play technology
- Complete with new rear fender wiring harness that must be used to replace the stock fender harness.

Badlands, CAN-bus brake function remover from turn signals

#513452

Stock:Yes

- Run-Turn-Brake module for rear turn signals
- Gives running light and brakelight function to turn signals and maintains turn signal function
- Load equalizer is built-in
- Module will work with 2000-up TSM and TSSM module/security systems.
Note: Order 513307 rear fender harness seperately, stock is not compatible

Badlands, Illuminator Plug 'n Play Run-Turn-Brake module

#513307

Stock:Yes

Plug 'n Play for running light, brake light and turn signal functions to new LED taillight and LED rear turn signals. This module has a built-in load equalizer to prevent rapid flashing turn signals. Comes with a new rear fender wiring harness.
Complete with installation instructions.

Badlands Indian Illuminator for rear LED turn signals

#567564

Stock:No