Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 89 search results

Sort on:

Sort on:

12-point black oxide chromoly.
- These top bolts feature 3/8-16" internal threads, allowing you to use the fastener of your choice inside your fender/strut
- High Performance specialists know ARP bolts are a great way to keep heads & crankshaft components of extreme performance engines together. So, these 12-point ARP bolts are not the cheap way to install your shocks, but if you want the best these are it
- OEM replacement reference 54309-87

Bare Knuckle Performance, ARP upper shock mount bolts

#700897

Stock:No

With USA flag engraved black anodized aluminum adjustment plate on the rear.
- Eliminates all associated axle adjustment problems with one easy to install kit
- Axle block made of polished 304 stainless steel
- Unique hash mark system for easy alignment of wheel, belt / chain
- 3/8-24 stainless steel stud & high quality chrome nyloc nuts and washers.
OEM replacement reference 45991-92, 41113-90, 41572-92

Bare Knuckle Performance, axle adjuster kit. USA flag

#700943

Stock:Yes

This is, like most similar seat screws, hand installed. The additional hole in the screw allows you to stick a pin or screw driver in and give it just a little extra over a 'finger tight' installation, to help prevent losing it. Comes complete with rubber O-ring to help with a mar-free installation.

Bare Knuckle Performance, seat screw. 1/4-28. Polished

#700903

Stock:Yes

This is, like most similar seat screws, hand installed. The additional hole in the screw allows you to stick a pin or screw driver in and give it just a little extra over a 'finger tight' installation, to help prevent losing it. Comes complete with rubber O-ring to help with a mar-free installation.

Bare Knuckle Performance, seat screw. 1/4-28. Black

#700905

Stock:Yes

12-point black oxide chromoly.
- These bottom bolts/nuts/washers use 1/2-20 threads that are cut back just enough that the threads will not engage and damage your shock eyelets or bushings, promoting longer shock life
- High Performance specialists know ARP bolts are a great way to keep heads & crankshaft components of extreme performance engines together. So, these 12-point ARP bolts are not the cheap way to install your shocks, but if you want the best these are it
- OEM replacement reference 4081.

Bare Knuckle Performance, ARP lower shock mount bolts

#700898

Stock:Yes

This is, like most similar seat screws, hand installed. The additional hole in the screw allows you to stick a pin or screw driver in and give it just a little extra over a 'finger tight' installation, to help prevent losing it. Comes complete with rubber O-ring to help with a mar-free installation.

Bare Knuckle Performance, seat screw. 1/4-28. Red

#700907

Stock:Yes

12-point polished stainless steel.
- These top bolts feature 3/8-16" internal threads, allowing you to use the fastener of your choice inside your fender/strut
- High Performance specialists know ARP bolts are a great way to keep heads & crankshaft components of extreme performance engines together. So, these 12-point ARP bolts are not the cheap way to install your shocks, but if you want the best these are it
- OEM replacement reference 54309-87

Bare Knuckle Performance, ARP upper shock mount bolts

#700894

Stock:Yes

A secondary (rear wheel) chain tensioner. We all know that rear chain slap, whipping, stretch and regular adjustments comes with the territory. Sounds bad but this automatic chain tensioning device makes the world a better place by keeping a constant tension on the bottom side of the chain for a nicer ride, less maintenance and a longer lasting chain.
Note: Requires fitment and welding by a qualified mechanic.

Bare Knuckle Performance, sprung chain tensioner

#700954

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers with sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and custom tapered washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize.
Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.

Bare Knuckle Performance, stainless axle kit. Front wheel

#700910

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers with sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and custom tapered washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize.
Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.

Bare Knuckle Performance, stainless axle kit. Front wheel

#700913

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers with sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and custom tapered washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize.
OEM replacement reference 4300080.
Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.

Bare Knuckle Performance, stainless axle kit. Front wheel

#700915

Stock:Yes

With USA flag engraved black anodized aluminum adjustment plate on the rear.
- Eliminates all associated axle adjustment problems with one easy to install kit
- Axle block made of polished 304 stainless steel
- Unique hash mark system for easy alignment of wheel, belt / chain
- 3/8-24 stainless steel stud & high quality chrome nyloc nuts and washers.
OEM replacement reference 41570-77, 41533-91T, 41573-84, 41112-79, 7725

Bare Knuckle Performance, axle adjuster kit. USA flag

#700945

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize.
OEM replacement reference 43000074.
Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.

Bare Knuckle Performance, stainless axle kit. Rear wheel

#700922

Stock:No

Includes proprietary nut, eccentrics, shoulder washer, E-ring and anti-seize.
Increased eccentric thickness prevents failure.
Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize.
OEM replacement reference 41056-02.
Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.

Bare Knuckle Performance, stainless axle kit. Rear wheel

#700928

Stock:Yes

Bare Knuckle Performance, axle adjuster kit. FXR logo

#700944

Stock:Yes

Bare Knuckle Performance, axle adjuster plate kit. FXR logo

#700947

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers with sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and custom tapered washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize.
Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.

Bare Knuckle Performance, stainless axle kit. Front wheel

#700914

Stock:Yes

This is, like most similar seat screws, hand installed. The additional hole in the screw allows you to stick a pin or screw driver in and give it just a little extra over a 'finger tight' installation, to help prevent losing it. Comes complete with rubber O-ring to help with a mar-free installation.

Bare Knuckle Performance, seat screw. 1/4-28. Gold

#700909

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and custom tapered washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize.
OEM replacement reference 43000083.
Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.

Bare Knuckle Performance, stainless axle kit. Front wheel

#700916

Stock:Yes

Offers great and lasting custom looks. Made from 17-4 series polished stainless steel, which offers sheer and tensile strength comparable to that of chromoly with superior corrosion resistance. Axle will not bend or break and is ball burnished for the toughest bearing surface. Comes with a high quality 12-point stainless steel nut and custom tapered washer. Nut is secured by a stainless steel e-ring. Comes complete with instructions and anti-seize.
OEM replacement reference 41547-07A.
Note: Axle and nut must be 100% clean before installation and coated with provided anti-seize (Loctite LB8012). This includes 'test fitting / hand tightening'. Cleaning axle, threads and anti-seize coating remains applicable when reinstalling after servicing wheel.

Bare Knuckle Performance, stainless axle kit. Front wheel

#700919

Stock:Yes