Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 322 search results

Sort on:

Sort on:

Load Harness for running light. Designed for a LED headlamp upgrade without fault codes. This harness prevents the BCM (Body Control Module) from triggering Diagnostic Trouble Codes by accurately replicating the original equipment headlamp halo running light load, ensuring uninterrupted function, performance and a smooth and reliable headlamp transition. It pairs perfectly, for instance, with Custom Dynamics’ Shark Demon® or ProBEAM® LED headlamps. Also perfect for retaining OEM lighting components, such as turn signals and taillight.

Custom Dynamics, Load Harness for LED headlamp conversion

#710232

Stock:Yes

High performance LED front turn signal assembly to replace the OEM turn signal with an aggressive styled housing in a gloss black finish. SAE Selective Yellow faceted lens offers dual intensity white running light and full contrast DOT compliant amber turn signal flash. Units are equipped with plug and play JAE connector for quick and simple 100% plug and play installation.
- Amber turn signals
- White running lights
- Smoke faceted lens
- Front facing turn signal assembly to replace the OEM turn signals
- High performance LED
- Aggressive fin-styled housing
- Decorative metal rivets complete the look with a rugged, industrial appeal
- Gloss black finish
- White Run, Amber Turn signal faceted lens offers dual intensity running light
- Full contrast DOT compliant turn signal flasher
- Plug and play JAE connector for quick and simple 100% plug and play installation
- Housing dimensions: 2.08” (50mm) long x 2.08” (50mm) high x 1.78” (45mm) deep

Custom Dynamics, Shark Demon white/amber front turn signals

#713111

Stock:Yes

White / White dual headlamp upgrade kit.
ECE, DOT & SAE approved. A White/White dual headlamp kit with low beam projecting 11,314 raw/5554 effective lumens from six projection-style LEDs. High beam adds eight additional direct-reflective LEDs boasting an impressive 22,274 raw/8634 effective lumens total. Side facing position lights further increase viewing angle and width of beam pattern for ditch-to-ditch illumination. Lamp assemblies are completely sealed IP67, waterproof with clear polycarbonate lens and gloss black aluminum housing.
Shark Demon LED headlamps offer high-performance illumination, specialized for motorcycle on road use with unmatched beam pattern and durability.
Complete with non-illuminated vents.
Note: Requires removal of OEM turn signals.
Note: See the optional LED lighted turn signal vent inserts 719368 (amber turn & white run) or 719369 (selective yellow turn signal with selective yellow lens) for further upgrading your Road Glide. Note that these lighted vent inserts replace the stock non-illuminated vent inserts, they are compatible with the 720025 white / white headlamp kit and 720026 white headlamp / yellow fog lamp Custom Dynamics V2 Shark Demon headlamp kits only.
Note: See 719370 for the optional Plug & Play Custom Dynamics load equalizer. Designed for used in combination with 720025 and 720026 V2 Shark Demon dual headlamp kits, which require the removal of the OEM turn signals. Prevents trouble codes.

Custom Dynamics, Shark Demon LED headlamp kit. White/white

#720025

Stock:No

Wiring harness extension & quick-disconnect for the OEM Tour-Pak. Used to quick disconnect harness plugs in-line with the main motorcycle wire harness under the seat to provide a 32 inch (81cm) extended wire lead with open 6-pin female Molex connector. This extended lead will mate to the Gen1 male OEM 14-24 style Tour-Pak wire harness (OEM 69200131) to provide power to the stock Tour-Pak lighting. The accessible connector provides easy removal of the Tour-Pak.

Custom Dynamics, Quick Disconnect ext. harness for Tour Pak

#719371

Stock:Yes

White running light that switches to amber turn signal. Smoke lens.
High performance LED front turn signal assembly to replace the OEM turn signal with an aggressive styled housing in a gloss black finish. Units are equipped with plug & play JAE connector for quick and simple 100% plug and play installation. Bolts directly to your Road Glide’s inner fairing using the provided hardware.
- Faceted lens offers dual intensity running light
- Front facing turn signal assembly to replace the OEM turn signals
- High performance LED
- Aggressive fin-styled housing
- Decorative metal rivets complete the look with a rugged, industrial appeal
- Gloss black finish
- Plug and play JAE connector for quick and simple 100% plug and play installation
- Housing dimensions: 2.08” (50mm) long x 2.08” (50mm) high x 1.78” (45mm) deep
Note: No ECE approval.

Custom Dynamics, Shark Demon Selective front turn signals

#717773

Stock:Yes

Dual intensity yellow running light with full contrast DOT compliant yellow turn signal. Yellow faceted lens.
High performance LED front turn signal assembly to replace the OEM turn signal with an aggressive styled housing in a gloss black finish. Units are equipped with plug & play JAE connector for quick and simple 100% plug and play installation. Bolts directly to your Road Glide’s inner fairing using the provided hardware.
- Faceted lens offers dual intensity running light
- Front facing turn signal assembly to replace the OEM turn signals
- High performance LED
- Aggressive fin-styled housing
- Decorative metal rivets complete the look with a rugged, industrial appeal
- Gloss black finish
- Plug and play JAE connector for quick and simple 100% plug and play installation
- Housing dimensions: 2.08” (50mm) long x 2.08” (50mm) high x 1.78” (45mm) deep
Note: No ECE approval.

Custom Dynamics, Shark Demon Selective front turn signals

#717772

Stock:Yes

With DOT, SEA and ECE approval.
LED headlamp comes with 6 individual selectable backlight colors, including orange, yellow, green, blue, purple, red or off. Color changing of the backlight is controlled by magnet operation. Just 'touch' the sensor inside the headlamp with a magnet, each time flip the magnet over to change the magnetic field and 'touch' again for the next color.
Specifications:
- Specialized for motorcycle on-road use
- DOT, SAE & ECE compliant design
- Matte black aluminum housing
- Durable polycarbonate lens
- High performance illumination
- 5800-6500K daylight color temperature
- Low beam: 3600 raw lumens, 2651 effective lumens (3 projection LEDs)
- High beam: 9080 raw lumens, 4485 effective lumens (4-direct reflective LEDs)
- Low beam stays on with high beam
- Color changing backlight with 4 pre-set colors
- Magnet controlled backlight
- Includes wire harness to power backlight independently if desired
- Minimized current draw
- Plug & Play installation
- Equipped with H4 connector
- Waterproof IP67.

Note: 2014-2022 FLHR Harley-Davidson® Road King, 2017-2020 FLHRXS Road King Special and 2020-2025 FLRT Freewheeler models require FLHR Road King wiring adapter (optional available as CDTB-H42H9H11)

Custom Dynamics, Shark Demon 7" LED headlamp with backlight

#718702

Stock:Yes

With DOT, SEA and ECE approval.
LED headlamp comes with 6 individual selectable backlight colors, including orange, yellow, green, blue, purple, red or off. Color changing of the backlight is controlled by magnet operation. Just 'touch' the sensor inside the headlamp with a magnet, each time flip the magnet over to change the magnetic field and 'touch' again for the next color.
Specifications:
- Specialized for motorcycle on-road use
- DOT, SAE & ECE compliant design
- Matte black aluminum housing
- Durable polycarbonate lens
- High performance illumination
- 5800-6500K daylight color temperature
- Low beam: 3600 raw lumens, 2651 effective lumens (3 projection LEDs)
- High beam: 9080 raw lumens, 4485 effective lumens (4-direct reflective LEDs)
- Low beam stays on with high beam
- Color changing backlight with 4 pre-set colors
- Magnet controlled backlight
- Includes wire harness to power backlight independently if desired
- Minimized current draw
- Plug & Play installation
- Equipped with H4 connector
- Waterproof IP67.

Custom Dynamics, Shark Demon 7" LED headlamp with backlight

#718701

Stock:Yes

This heavy-duty silicone rubber seal is designed to replace the factory-installed seal on Harley-Davidson TSM (Turn Signal Module) and TSSM (Turn Signal Security Module) wire harness plug. When replacing the TSM, Custom Dynamics strongly recommends replacing the original seal to maintain a secure, watertight connection and protect the unit from moisture-related damage.
Used on both OEM and Custom Dynamics 709103, 709104, 709105 and 709106 TSM (turn signal modules)

Custom Dynamics, Replacement Seal for TSM/TSSM Connector

#709107

Stock:Yes

This will replace OEM TSM (Turn Signal Module) 68921-07, HFSM (Hands Free Security Module) 68925-07 (for US & HDI/EU models) and HFSM 69976-08.
Integration with the OEM safety switches prevent starting in gear without the clutch pulled. It will not replace the HFSM factory alarm features. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, Smart turn signal module TSM3

#709105

Stock:Yes

This will replace OEM TSM (Turn Signal Module) 68920-01, TSSM (Turn Signal Security Module) 68922-00 (for US models) or TSSM 68924-00 (for HDI/EU models). It will not replace the TSSM factory alarm features.
Note: The replacement of the OEM TSSM factory alarm module 68922-00 & TSSM 68924-00 for models with EFI require the use of a TechnoResearch diagnostic tool to complete the TSSM module replacement procedure. For some models a manual procedure to marry the module to the bike is possible, for all others the TechnoResearch diagnostic tool is required for TSSM module replacement. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, turn signal module TSM-1

#709103

Stock:Yes

The Shark Demon™ 2 is a side mount headlamp for 12 VDC systems, similar sized to 5-3/4 headlamps. It includes installation hardware, without a bracket. The included universal 3-wire harness connects to vehicle high beam, low beam, and ground. Offers high-performance illumination with reliability and the improved vibration resistance typical for LED.
- Designed for on-road use
- 12V DC
- High performance illumination
- No more burned-out bulbs
- Contemporary design
- Gloss black aluminum housing
- Polycarbonate clear lens
- 5800-6500K color temperature
- Low beam: 3600 raw lumen, 2651 effective lumen (3 projection LEDS)
- High beam: 9080 Raw lumen, 4485 effective lumen (4 direct reflective LEDS)
- Low beam stays on with high beam
- Incl. universal wiring harness
- Waterproof IP67

Custom Dynamics, 5-3/4" Shark Demon LED headlamp kit

#709274

Stock:Yes

Highly durable hard-coated polycarbonate offers excellent impact resistance and strength with a clear, glass-like transparency. Provides protection against rocks, debris, mud, dust, and other hazards that could potentially damage or scratch your lights. Designed for easy snap-on installation and removal. A snug fit to the light assembly without diminishing illumination. Compatible with Custom Dynamics’ Shark Demon® 2 Off-Road Auxiliary LED Lights (sold separately). For off road use only.

Custom Dynamics, Rock Guard For Shark Demon 2

#719418

Stock:Yes

With dual-color (amber turn & white run) smoked lens version with bright white LEDs for constant running light and dynamic amber LEDs for turn signals.
DOT-compliant.
Premium integrated LED illuminated front turn signal vents, designed to replace the non-illuminated vented speed plates in the Custom Dynamics Shark Demon® 2 Road Glide head lamp kit MCS 720025 or MCS 720026 only, which are sold separately. These turn signal vents will not fit stock or any other aftermarket headlamp kit.
Features a gloss black assembly with bold, race-inspired fin styling, decorative mesh with a modern look and enhanced safety. Factory air flow is retained.
- Decorative mesh
- Bolt on installation
- Plug & Play.
Note: Compatible with Shark Demon® kits MCS 720025 or MCS 720026 only and is not compatible with any other stock or aftermarket LED headlamp kit.

Custom Dynamics, turn signal LED vent inserts. Front. Black

#719369

Stock:No

With a single intensity Selective Yellow LED turn signal only setup behind an authentic SAE selective yellow lens.
DOT-compliant.
Premium integrated LED illuminated front turn signal vents, designed to replace the non-illuminated vented speed plates in the Custom Dynamics Shark Demon® 2 Road Glide head lamp kit (MCS 720025 or MCS 720026) , which are sold separately. These turn signal vents will not fit stock or any other aftermarket headlamp kit.
Features a gloss black assembly with bold, race-inspired fin styling, decorative mesh with a modern look and enhanced safety. Factory air flow is retained.
- Decorative mesh
- Bolt on installation
- Plug & Play.
Note: Compatible with Shark Demon® kits MCS 720025 or MCS 720026 only and is not compatible with any other stock or aftermarket LED headlamp kit.

Custom Dynamics, turn signal LED vent inserts. Front. Black

#719368

Stock:No

White headlamp / Yellow fog dual headlamp upgrade kit.
This white/yellow combo kit includes a bright white, DOT compliant LED headlamp with a low beam of three projection-style LEDs and a high beam which adds four additional direct-reflective LEDs boasting an impressive 9080 raw/3216 effective lumens.
An SAE compliant, selective yellow fog lamp provides an additional 8050 raw/2050 effective lumens and riding clarity like you’ve never experienced before. Lamp assemblies are completely sealed IP67, waterproof with polycarbonate lens and gloss black aluminum housing.
Shark Demon LED headlamps offer high-performance illumination, specialized for motorcycle on road use with unmatched beam pattern and durability.
Complete with non-illuminated vents.
Note: Requires removal of OEM turn signals.
Note: See the optional LED lighted turn signal vent inserts 719368 (amber turn & white run) or 719369 (selective yellow turn signal with selective yellow lens) for further upgrading your Road Glide. Note that these lighted vent inserts replace the stock non-illuminated vent inserts, they are compatible with the 720025 white / white headlamp kit and 720026 white headlamp / yellow fog lamp Custom Dynamics V2 Shark Demon headlamp kits only.
Note: See 719370 for the optional Plug & Play Custom Dynamics load equalizer. Designed for used in combination with 720025 and 720026 V2 Shark Demon dual headlamp kits, which require the removal of the OEM turn signals. Prevents trouble codes.

Custom Dynamics, Shark Demon LED headlamp kit. White/yellow

#720026

Stock:No

This will replace OEM TSM (Turn Signal Module) 68920-07 and HFSM (Hands Free Security Module) 68924-07 (for US & HDI/EU models).
Integration with the OEM safety switches prevent starting in gear without the clutch pulled. It will not replace the HFSM factory alarm features. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, Smart turn signal module TSM-4

#709106

Stock:Yes

Designed for used in combination with 720025 and 720026 V2 Shark Demon headlamp kits, which require the removal of the OEM turn signals. These modules offer a plug & play installation and ensure that the front turn signal circuits maintain the correct electrical load, preventing rapid flashing turn signals, unwanted Diagnostic Trouble Codes (DTC) or Body Control Module (BCM) warning messages on your dash.
- Plug & Play for 720025 and 720026 dual headlamp kits
- Prevents trouble codes
- Reliable
- Discreet integration

Custom Dynamics, front turn signal equalizer modules

#719370

Stock:No

This will replace OEM TSM (Turn Signal Module) 68921-01, TSSM (Turn Signal Security Module) 68923-00 (for US models) and TSSM 68925-00 (for HDI/EU models) It will not replace the TSSM factory alarm features.
Note: This will replace OEM TSSM 68923-00 and TSSM 68925-00. Models It requires the use of a TechnoResearch diagnostic tool to complete the TSSM module replacement procedure. For some models a manual procedure to marry the module to the bike is possible, for all others the TechnoResearch diagnostic tool is required for TSSM module replacement. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, Smart turn signal module TSM-2

#709104

Stock:Yes

TruWRAPZ® wrap around your fork legs. Installs in 30 minutes with 3M tape. Comes with dual intensity Genesis® LEDs for dual run-turn signal function. Works with hazard lights and alarms when bike is on or off. Includes Posi-Taps, for a tap-in wire application or solder connector with adhesive lined heat shrink tubing, stainless steel wire loom and chrome tie-wraps.
- Amber LEDs.
- Clear tube.

Custom Dynamics TruWRAPZ® LED turn signals

#536284

Stock:Yes