Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 169 search results

Sort on:

Sort on:

Plug-in module for rear side that adds a rapid three time 'flash' when braking, and a run-turn-brake function to single filament OEM and halogen lights. If you do not want the flashing brake function, it can be turned off by unplugging the connector marked 'flashing'.
Note: A load equalizer is not required.
Note: Not compatible with Kuryakyn Panacea taillights.
Note: For 04-13 XL see 968343 adapter, which allows installation of 968344 'The Flasher' on these non CAN-bus Sportster models.

Cycle Visions, The Flasher plug-in module

#968344

Stock:Yes

4mm thick neoprene cover. Used to prevent paintjob damage when working on your own or customer bikes. Made of 4mm thick neoprene, the same material as a wet suit, to protect paint, aluminum and chrome when working on the bike or during storage. Cycleskins™ covers are form fitted.

Cycle Visions Cycleskyns™ 3.2 gallon Sportster tank cover

#967001

Stock:Yes

4mm thick neoprene cover. With pockets. Used to prevent paintjob damage when working on your own or customer bikes. Made of 4mm thick neoprene, the same material as a wet suit, to protect paint, aluminum and chrome when working on the bike or during storage. Cycleskins™ covers are form fitted.

Cycle Visions Cycleskyns™ 3.2 gallon Sportster tank cover

#967003

Stock:Yes

Without detachable sissy bar. Remove your saddlebag in 3 seconds. Used with stock saddlebags and can be used with or without docking hardware for sissy bars. Constructed from 303 stainless steel.

Cycle Visions, barebacks saddlebag mount kit

#968003

Stock:Yes

No exhaust cut-out.
Extended stretched saddlebag, used as a direct replacement for Touring hard bags.
Saddlebag is fiberglass gel coated bottom ends only, it will take stock H-D lids and hardware.

Cycle Visions extended saddlebag, right side

#968220

Stock:Yes

Classic styling in black powder coated finish, 18" tall. Made from 9/16" square steel bar. Can be used with stock or aftermarket side plates. Side plate width 6.88" to 7.625" wide.

Note: Side plates not included.
Note: Will not fit 'Plug-N-Play®' side plates.

Cycle Visions Daggertude stick sissy bar 18", black

#968250

Stock:Yes

Without detachable sissy bar. Remove your saddlebag in 3 seconds. Used with stock saddlebags and can be used with or without docking hardware for sissy bars. Constructed from 303 stainless steel.

Cycle Visions, barebacks saddlebag mount kit

#968009

Stock:Yes

Chrome. 18" tall. Side plate width 6.88" to 7.625" wide. Made from 9/16" square steel bar. Can be used with stock or aftermarket side plates.
Note: Sideplates not included.
Note: Will not fit 'Plug-N-Play®' side plates.

Cycle Visions Daggertude stick sissy bar 18", chrome

#968249

Stock:Yes

No exhaust cut-out.
Extended stretched saddlebag, used as a direct replacement for Touring hard bags.
Saddlebag is fiberglass gel coated bottom ends only, it will take stock H-D lids and hardware.

Cycle Visions extended saddlebag, left side

#968219

Stock:Yes

Black powder coated. 18" tall. Side plate width 8.25" to 8.75" wide. Made from 9/16" square steel bar. Can be used with stock or aftermarket side plates.

Note: Side plates not included.
Note: Will not fit 'Plug-N-Play®' side plates.

Cycle Visions Daggertude stick sissy bar 18", black

#968246

Stock:Yes

Without detachable sissy bar. Remove your saddlebag in 3 seconds. Used with stock saddlebags and can be used with or without docking hardware for sissy bars. Constructed from 303 stainless steel.

Cycle Visions, barebacks saddlebag mount kit

#968000

Stock:Yes

Chrome. 18" tall. Side plate width 8.25" to 8.75" wide. Made from 9/16" square steel bar. Can be used with stock or aftermarket side plates.
Note: Sideplates not included.
Note: Will not fit 'Plug-N-Play®' side plates.

Cycle Visions Twisted Stick sissy bar 18", chrome

#968334

Stock:Yes

11" wide. Black powder coated. 10 gauge steel. Detachable. Mounts to outside of fender struts. Takes all 11" wide Cycle Visions sissy bars.
Note: Appropriate docking hardware must be purchased separately.

Cycle Visions, detachable sissy bar side plates. Black

#968337

Stock:Yes

Without detachable sissy bar. Remove your saddlebag in 3 seconds. Used with stock saddlebags and can be used with or without docking hardware for sissy bars. Constructed from 303 stainless steel.

Cycle Visions, barebacks saddlebag mount kit

#968007

Stock:Yes

With detachable sissy bar. Remove your saddlebag in 3 seconds. Used with stock saddlebags and can be used with or without docking hardware for sissy bars. Constructed from 303 stainless steel.

Cycle Visions, barebacks saddlebag mount kit

#968008

Stock:Yes

Specifically designed for use with Bagger Tail mounting hardware. Fills the gap between the saddlebags and chassis. Raw finished steel, ready to paint.

Cycle Visions Bagger Tail filler panels

#968211

Stock:Yes

3/8-16 threaded. For use on top of the Multitude sissy bars, shifter knob or any other custom application.

Cycle Visions Multitude knob Eyeball

#968272

Stock:Yes

Chrome. 18" tall. Side plate width 11". Made from 9/16" square steel bar. Can be used with stock or aftermarket side plates.
Note: Sideplates not included.
Note: Will not fit 'Plug-N-Play®' side plates.

Cycle Visions Daggertude stick sissy bar 18", chrome

#968331

Stock:Yes

Black powder coated. 30" tall. Side plate width 11". Made from 9/16" square steel bar. Can be used with stock or aftermarket side plates.
Note: Side plates not included.
Note: Will not fit 'Plug-N-Play®' side plates.

Cycle Visions Moneytube sissy bar 30", black

#587684

Stock:Yes

Black powder coated. 18" tall. Side plate width 11". Made from 9/16" square steel bar. Can be used with stock or aftermarket side plates.
Note: Side plates not included.
Note: Will not fit 'Plug-N-Play®' side plates.

Cycle Visions Daggertude stick sissy bar 18", black

#587677

Stock:Yes