Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 659 search results

Sort on:

Sort on:

Silver anodized.
Mounts to 47-49mm diameter forks.
The perfect way to install small EC approved front turn signals that go virtually unnoticed, until activated! Homogeneously bright LED units assure excellent visibility in traffic. The HeinzBikes 'Stairs' is a 2-piece locking system, allowing installation without disassembling the fork. Housing are CNC machined aluminum with an anodized finish for lasting good looks.
- CNC machined aluminum housings
- Anodized finish
- Homogeneously bright LED
- Excellent visibility in traffic
- 2-piece construction
- No fork disassembling required
- 10-minute install

HeinzBikes, ZC-Line Classic LED fork turn signal set. Silver

#707983

Stock:Yes

With Position Light.
ECE approved. Black anodized CNC machined billet aluminum housing. Super slim and extremely bright LED front turn signals with a white position light for additional safety. Installs below the handlebar for an inconspicuous front turn signal set-up.
- Black anodized
- CNC machined aluminum housing
- ECE approved lens
- Super slim design
- Ultra bright LED illumination.

HeinzBikes, 'Stripes' below bar turn signals. Black PL

#718594

Stock:Yes

Without Position Light.
Black anodized finish. ECE approved front turn signals with a white position light. CNC machined billet aluminum housing. These are the smallest, brightest and most powerful LED turn signals HeinzBikes has made to date. Virtually invisible on the handlebar, with a 'smaller than a 1 cent coin' lens. Installs below the handlebar for an inconspicuous front turn signal set-up.

HeinzBikes, Nano below bar turn signals. Black no PL

#718595

Stock:Yes

Manufactured from CNC machined billet aluminum with an anodized finish.
- Fits 22-25 FXLRS, FXLRST without modifications.
- 22–25 FLDE, FXFB/S, FLHC/S, FLI, FXLR, FXBB/S, FXST, FLSL, FLSB requires rear fender modification or swap.
- Does not fit Fat Boy & Breakout.
- If no fender strut-mounted turn signals are used, we recommend fender strut cover plates.
Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

HeinzBikes, performance fender struts. Red

#718599

Stock:Yes

Manufactured from CNC machined billet aluminum with an anodized finish.
- Fits 22-25 FXLRS, FXLRST without modifications.
- 22–25 FLDE, FXFB/S, FLHC/S, FLI, FXLR, FXBB/S, FXST, FLSL, FLSB requires rear fender modification or swap.
- Does not fit Fat Boy & Breakout.
- If no fender strut-mounted turn signals are used, we recommend fender strut cover plates.
Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

HeinzBikes, performance fender struts. Black

#718597

Stock:Yes

CNC-machined high-quality billet aluminum with an anodized finish. More robust but still very light and safe. The GRIP Surface guarantees maximum grip and the extra-wide footrest allows you to maintain full control of the bike, even in extreme situations. The smooth underside and angled design offer more cornering freedom. Floorboards can be rotated 360° to any angle and locked into place with the tilt adjustment screw allowing you to dial into your preferred riding position.

HeinzBikes, floorboards 'Performance'. Black/black

#718602

Stock:Yes

CNC-machined high-quality billet aluminum with an anodized finish. More robust but still very light and safe. The GRIP Surface guarantees maximum grip and the extra-wide footrest allows you to maintain full control of the bike, even in extreme situations. The smooth underside and angled design offer more cornering freedom. Floorboards can be rotated 360° to any angle and locked into place with the tilt adjustment screw allowing you to dial into your preferred riding position.

HeinzBikes, floorboards 'Performance'. . Black/gold

#718603

Stock:Yes

CNC-machined high-quality billet aluminum with an anodized finish. More robust but still very light and safe. The GRIP Surface guarantees maximum grip and the extra-wide footrest allows you to maintain full control of the bike, even in extreme situations. The smooth underside and angled design offer more cornering freedom. Floorboards can be rotated 360° to any angle and locked into place with the tilt adjustment screw allowing you to dial into your preferred riding position.

HeinzBikes, floorboards 'Performance'. . Black/silver

#718605

Stock:Yes

Manufactured from CNC machined billet aluminum with an anodized finish.
- Fits 22-25 FXLRS, FXLRST without modifications.
- 22–25 FLDE, FXFB/S, FLHC/S, FLI, FXLR, FXBB/S, FXST, FLSL, FLSB requires rear fender modification or swap.
- Does not fit Fat Boy & Breakout.
- If no fender strut-mounted turn signals are used, we recommend fender strut cover plates.
Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

HeinzBikes, performance fender struts. Silver

#718600

Stock:Yes

CNC-machined high-quality billet aluminum with an anodized finish. More robust but still very light and safe. The GRIP Surface guarantees maximum grip and the extra-wide footrest allows you to maintain full control of the bike, even in extreme situations. The smooth underside and angled design offer more cornering freedom. Floorboards can be rotated 360° to any angle and locked into place with the tilt adjustment screw allowing you to dial into your preferred riding position.

HeinzBikes, floorboards 'Performance'. . Black/red

#718604

Stock:Yes

CNC-machined high-quality billet aluminum with an anodized finish. More robust but still very light and safe. The GRIP Surface guarantees maximum grip and the extra-wide footrest allows you to maintain full control of the bike, even in extreme situations. The smooth underside and angled design offer more cornering freedom. Floorboards can be rotated 360° to any angle and locked into place with the tilt adjustment screw allowing you to dial into your preferred riding position.

HeinzBikes, floorboards 'Performance'. Black/bronze

#718606

Stock:Yes

With Position Light.
Black anodized finish. ECE approved front turn signals with a white position light. CNC machined billet aluminum housing. These are the smallest, brightest and most powerful LED turn signals HeinzBikes has made to date. Virtually invisible on the handlebar, with a 'smaller than a 1 cent coin' lens. Installs below the handlebar for an inconspicuous front turn signal set-up.

HeinzBikes, Nano below bar turn signals. Black with PL

#718596

Stock:Yes

Manufactured from CNC machined billet aluminum with an anodized finish.
- Fits 22-25 FXLRS, FXLRST without modifications.
- 22–25 FLDE, FXFB/S, FLHC/S, FLI, FXLR, FXBB/S, FXST, FLSL, FLSB requires rear fender modification or swap.
- Does not fit Fat Boy & Breakout.
- If no fender strut-mounted turn signals are used, we recommend fender strut cover plates.
Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

HeinzBikes, performance fender struts. Bronze

#718601

Stock:Yes

Gloss black.
ECE approved left & right set. Super small (38mm overall width) LED taillight, brake light and turn signal in one. Used to replace bulky stock turn signals. Mounts to any flat surface. Offers exceptional bright SMD LED illumination for safety in traffic. Can be installed directly on the fender struts without requiring adapters. Alternatively perfect to install on any flat surface you can imagine.
- ECE approved
- Registered small aero design
- Very bright
- Complete light unit illuminates red or amber, depending on the function
- High quality CNC machined aluminum housings
- Mounts to any flat surface
- Just 38mm overall width
- Bolt-on installation ease.
Note: A HeinzBikes load equalizer (turn signal flasher frequency sensor) is available as 706793 and required for all earlier non CAN-bus H-D models (pre-2011 Softail; Pre-2012 Dyna; pre-2014 Touring and pre-2014 XL models that upgrade from incandescent light bulbs to LED turn signals to correct blink frequency.

HeinzBikes, Aero Micro Winglets 3-1 taillight/turn signals

#716773

Stock:No

Manufactured from CNC machined billet aluminum with an anodized finish.
- Fits 22-25 FXLRS, FXLRST without modifications.
- 22–25 FLDE, FXFB/S, FLHC/S, FLI, FXLR, FXBB/S, FXST, FLSL, FLSB requires rear fender modification or swap.
- Does not fit Fat Boy & Breakout.
- If no fender strut-mounted turn signals are used, we recommend fender strut cover plates.
Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

HeinzBikes, performance fender struts. Gold

#718598

Stock:Yes

No Position Light.
ECE approved. Black anodized CNC machined billet aluminum housing. Super slim and extremely bright LED front turn signals. Installs below the handlebar for an inconspicuous front turn signal set-up.
- Black anodized
- CNC machined aluminum housing
- ECE approved lens
- Super slim design
- Ultra bright LED illumination.

HeinzBikes, 'Stripes' below bar turn signals. Black no PL

#718593

Stock:Yes

Black Powder Coated with Gold Color Ring.
The Performance Clubstyle crash bar is made of steel with a durable powder coated finish. Designed to help prevent damage in events that, hopefully, never come. A good insurance and the looks are stunning and a perfect addition to any Clubstyle bike. Complete with model-specific hardware for a no-hassle installation using the OEM mounting points. Crash bar ends come with replaceable sliders.

HeinzBikes, Performance crashbar. Gold Color Ring

#718613

Stock:Yes

Black anodized finish. ECE approved front turn signals with a white position light. CNC machined billet aluminum housing. These are the smallest, brightest and most powerful LED turn signals HeinzBikes has made to date. Virtually invisible on the handlebar, with a 'smaller than a 1 cent coin' lens. Installs below the handlebar for an inconspicuous front turn signal set-up.
Note: Only CAN-bus models like 11-up Softail, 12-17 Dyna, 14-up Touring, 14-22 XL Sportster models can be directly installed. Earlier models, without CAN-bus type wiring, will require a load equalizer to correct the turn signal flash rate when switching from regular incandescent bulbs to LED. A HeinzBikes load equalizer is available is 706793.

HeinzBikes, Nano below bar turn signals. Black

#705802

Stock:Yes

HeinzBikes, Clubstyle handlebar 1". Bronze

#705898

Stock:Yes

HeinzBikes, Clubstyle straight risers 8". Black/Red

#706037

Stock:Yes