Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 162 search results

Sort on:

Sort on:

No DLR (Day Light Driving light).
Small precision CNC machined aluminum turn signals with a one-piece housing. SMD-LED technique assures astounding bright lights combined with the tinted lens.
- Front use
- Installs under mirror screw on handlebar
- SMD-LED technique
- Tinted lens
- EC approved.

Kodlin, Elypse LED mini front turn signals. Chrome

#963497

Stock:No

With DLR (Day Light Driving light).
Small precision CNC machined aluminum turn signals with a one-piece housing. SMD-LED technique assures astounding bright lights combined with the tinted lens.
- Front use
- Installs under mirror screw on handlebar
- SMD-LED technique
- Tinted lens
- EC approved.
Note: A load equalizer to correct turn signal flash rate may be required for models currently equipped with regular incandescent (non LED) turn signal bulbs. CAN-bus models will not require a load equalizer.

Kodlin, Elypse LED mini turn signals. Front. Chrome

#963499

Stock:No

Stainless steel with black carrier and black nitrided disc.
11.8" / 300mm OD., 56.3mm I.D., 8.5mm (5/16") counterbored mounting holes with 3.25" bolt circle hole. 5mm thick.
Fits OEM or accessory cast & laced wheels with 3.25" bolt circle mount holes. Mount style 'B'. Repl. 46717-10, 41500088, 41500068.
Designed by Master Designer Kodlin, produced by Brake Specialist SBS. It is just logical that when combining specialists in their respective fields you get the best of both worlds, and that is exactly what happened. Made of a high quality stainless steel, alloyed with a high carbon content, to offer excellent brake performance and reliable stopping power in any condition.
Note: Only the friction area of the black nitrided outer stainless disc will wear away quickly, leaving the rest of the disc black.

Kodlin by SBS, '9-spoke' brake rotor front L/R. Black

#709312

Stock:Yes

Stainless steel with black carrier and a clear disc.
11.8" / 300mm OD., 56.3mm I.D., 8.5mm (5/16") counterbored mounting holes with 3.25" bolt circle hole. 5mm thick.
Fits OEM or accessory cast & laced wheels with 3.25" bolt circle mount holes. Mount style 'B'. Repl. 46717-10, 41500088, 41500068.
Designed by Master Designer Kodlin, produced by Brake Specialist SBS. It is just logical that when combining specialists in their respective fields you get the best of both worlds, and that is exactly what happened. Made of a high quality stainless steel, alloyed with a high carbon content, to offer excellent brake performance and reliable stopping power in any condition.

Kodlin by SBS, '7-spoke' brake rotor front left. Clear

#709315

Stock:Yes

Stainless steel with black carrier and a clear disc.
11.8" / 300mm OD., 56.3mm I.D., 8.5mm (5/16") counterbored mounting holes with 3.25" bolt circle hole. 5mm thick.
Fits OEM or accessory cast & laced wheels with 3.25" bolt circle mount holes. Mount style 'B'. Repl. 46717-10, 41500088, 41500068.
Designed by Master Designer Kodlin, produced by Brake Specialist SBS. It is just logical that when combining specialists in their respective fields you get the best of both worlds, and that is exactly what happened. Made of a high quality stainless steel, alloyed with a high carbon content, to offer excellent brake performance and reliable stopping power in any condition.

Kodlin by SBS, '10-spoke' brake rotor front L/R. Clear

#709317

Stock:Yes

Stainless steel with black carrier and a clear disc.
11.5" / 292mm O.D, 56.3mm I.D., 10.5mm (3/8") counterbored mounting holes. Mount style 'B'. Repl. 41797-00.
Designed by Master Designer Kodlin, produced by Brake Specialist SBS. It is just logical that when combining specialists in their respective fields you get the best of both worlds, and that is exactly what happened. Made of a high quality stainless steel, alloyed with a high carbon content, to offer excellent brake performance and reliable stopping power in any condition.
Note: Fitment on OEM FXSTD wheel requires 43837-00 brake rotor spacer plate.

Kodlin by SBS, '7-spoke' brake rotor rear. Clear

#709321

Stock:Yes

Stainless steel with black carrier and a clear disc.
11.5" / 292mm O.D, 56.3mm I.D., 10.5mm (3/8") counterbored mounting holes. Mount style 'B'. Repl. 41797-00.
Designed by Master Designer Kodlin, produced by Brake Specialist SBS. It is just logical that when combining specialists in their respective fields you get the best of both worlds, and that is exactly what happened. Made of a high quality stainless steel, alloyed with a high carbon content, to offer excellent brake performance and reliable stopping power in any condition.
Note: Fitment on OEM FXSTD wheel requires 43837-00 brake rotor spacer plate.

Kodlin by SBS, '9-spoke' brake rotor rear. Clear

#709319

Stock:Yes

Stainless steel with black carrier and a clear disc.
11.8" / 300mm OD., 56.3mm I.D., 8.5mm (5/16") counterbored mounting holes with 3.25" bolt circle hole. 5mm thick.
Fits OEM or accessory cast & laced wheels with 3.25" bolt circle mount holes. Mount style 'B'. Repl. 46717-10, 41500088, 41500068.
Designed by Master Designer Kodlin, produced by Brake Specialist SBS. It is just logical that when combining specialists in their respective fields you get the best of both worlds, and that is exactly what happened. Made of a high quality stainless steel, alloyed with a high carbon content, to offer excellent brake performance and reliable stopping power in any condition.

Kodlin by SBS, '9-spoke' brake rotor front L/R. Clear

#709311

Stock:Yes

Stainless steel with black carrier and a clear disc.
11.8" / 300mm OD., 56.3mm I.D., 8.5mm (5/16") counterbored mounting holes with 3.25" bolt circle hole. 5mm thick.
Fits OEM or accessory cast & laced wheels with 3.25" bolt circle mount holes. Mount style 'B'. Repl. 46717-10, 41500088, 41500068.
Designed by Master Designer Kodlin, produced by Brake Specialist SBS. It is just logical that when combining specialists in their respective fields you get the best of both worlds, and that is exactly what happened. Made of a high quality stainless steel, alloyed with a high carbon content, to offer excellent brake performance and reliable stopping power in any condition.

Kodlin by SBS, '7-spoke' brake rotor front right. Clear

#709313

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar.
- Extra tall. 43cm high x 80cm wide x 26cm lower width x 13cm pullback
- Riser clamp area 1-1/4" (32mm) diameter x 140mm wide
- E-throttle
- Okay for heated grips
- Slotted for internal wiring
- Wiring slot facing down.
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Note: Original risers of some models are too wide and may not fit. 979860 Kodlin Big Block risers are advised for all H-D with 1-1/4" (32mm) diameter at the risers, excl. M8 Breakout models for which 599573 Breakout lower risers are advised. When stock risers are a (too) tight fit do not install.

Kodlin, 2" Str8Up handlebar extra tall 43 cm. Black

#721046

Stock:No

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar.
- Tall. 38cm high x 81cm wide x 26cm lower width x 13cm pullback
- Riser clamp area 1-1/4" (32mm) diameter x 140mm wide
- E-throttle
- Okay for heated grips
- Slotted for internal wiring
- Wiring slot facing down
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Note: Original risers of some models are too wide and may not fit. 979860 Kodlin Big Block risers are advised for all H-D with 1-1/4" (32mm) diameter at the risers, excl. M8 Breakout models for which 599573 Breakout lower risers are advised. When stock risers are a (too) tight fit do not install.

Kodlin, 2" Str8Up handlebar tall 38 cm. Black

#721041

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar. Must be used with 1-1/4" inside diameter risers, like Kodlin Big Block (979860), Kodlin Spock (928030) or other aftermarket risers with 1-1/4" (32mm) clamping area.
- Extra tall. 43cm high x 84cm wide x 30cm lower width x 13cm pullback
- 1-1/4" (32mm) riser area
- E-throttle
- Okay for heated grips
- Slotted for internal wiring
- Wiring slot facing down.
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Note: The lower overall width of this Fat Boy handlebar is 30cm, other 25-up Softails are just 26cm wide. The 30cm lower width is advised for a better optical fitment. Original risers of some models are too wide and may not fit. 979860 Kodlin Big Block risers (140mm overall width) are advised for all H-D with 1-1/4" (32mm) diameter at the risers. When stock risers are a (too) tight fit do not install.

Kodlin, 2" Str8Up handlebar extra tall 43 cm. Black

#721043

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar.
- Extra tall. 43cm high x 80cm wide x 26cm lower width x 13cm pullback
- Riser clamp area 1-1/4" (32mm) diameter x 140mm wide
- E-throttle
- Okay for heated grips
- Slotted for internal wiring
- Wiring slot facing down
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Kodlin, 2" Str8Up handlebar extra tall 43 cm. Black

#721040

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar. Must be used with 1-1/4" inside diameter risers, like Kodlin Big Block (979860), Kodlin Spock (928030) or other aftermarket risers with 1-1/4" (32mm) clamping area.
- Medium height. 28cm high x 85cm wide x 30cm lower width x 13cm pullback
- 1-1/4" (32mm) riser area
- E-throttle
- Okay for heated grips
- Slotted for internal wiring
- Wiring slot facing down.
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Note: The lower overall width of this Fat Boy handlebar is 30cm, other 25-up Softails are just 26cm wide. The 30cm lower width is advised for a better optical fitment. Original risers of some models are too wide and may not fit. 979860 Kodlin Big Block risers (140mm overall width) are advised for all H-D with 1-1/4" (32mm) diameter at the risers. When stock risers are a (too) tight fit do not install.

Kodlin, 2" Str8Up handlebar medium 28 cm. Black

#721045

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar. Must be used with 1-1/4" inside diameter risers, like Kodlin Big Block (979860), Kodlin Spock (928030) or other aftermarket risers with 1-1/4" (32mm) clamping area.
- Tall. 38cm high x 82cm wide x 30cm lower width x 13cm pullback
- 1-1/4" (32mm) riser area
- E-throttle
- Okay for heated grips
- Slotted for internal wiring
- Wiring slot facing down.
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Note: The lower overall width of this Fat Boy handlebar is 30cm, other 25-up Softails are just 26cm wide. The 30cm lower width is advised for a better optical fitment. Original risers of some models are too wide and may not fit. 979860 Kodlin Big Block risers (140mm overall width) are advised for all H-D with 1-1/4" (32mm) diameter at the risers. When stock risers are a (too) tight fit do not install.

Kodlin, 2" Str8Up handlebar tall 38 cm. Black

#721044

Stock:Yes

With approval. Gloss black powder coated Super Fat 2" (51mm) diameter handlebar.
- Medium height. 28cm high x 82cm wide x 26cm lower width x 13cm pullback
- Riser clamp area 1-1/4" (32mm) diameter x 140mm wide
- E-throttle
- Okay for heated grips
- Slotted for internal wiring
- Wiring slot facing down
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Kodlin, 2" Str8Up handlebar medium 28 cm. Black

#721042

Stock:Yes

Stainless steel with black carrier and a clear disc.
11.5" / 292mm O.D, 56.3mm I.D., 10.5mm (3/8") counterbored mounting holes. Mount style 'B'. Repl. 41797-00.
Designed by Master Designer Kodlin, produced by Brake Specialist SBS. It is just logical that when combining specialists in their respective fields you get the best of both worlds, and that is exactly what happened. Made of a high quality stainless steel, alloyed with a high carbon content, to offer excellent brake performance and reliable stopping power in any condition.
Note: Fitment on OEM FXSTD wheel requires 43837-00 brake rotor spacer plate.

Kodlin by SBS, '10-spoke' brake rotor rear. Clear

#709323

Stock:Yes

With integrated DLR (Day Light Driving light).
Elypse LED turn signal with integrated daytime running light, for a clean look and maximum visibility. Small precision CNC machined aluminum turn signals with a one-piece housing.
- Front use
- Black anodized finish
- CNC‑machined aluminum housing
- Plug‑and‑play connector for easy installation
- Installs under the top triple tree
- ECE‑approved

Kodlin, Elypse LED mini front turn signals. Black

#721052

Stock:Yes

Stainless steel with black carrier and a black nitrided disc.
11.5" / 292mm O.D, 56.3mm I.D., 10.5mm (3/8") counterbored mounting holes. Mount style 'B'. Repl. 41797-00.
Designed by Master Designer Kodlin, produced by Brake Specialist SBS. It is just logical that when combining specialists in their respective fields you get the best of both worlds, and that is exactly what happened. Made of a high quality stainless steel, alloyed with a high carbon content, to offer excellent brake performance and reliable stopping power in any condition.
Note: Only the friction area of the black nitrided outer stainless disc will wear away quickly, leaving the rest of the disc black.
Note: Fitment on OEM FXSTD wheel requires 43837-00 brake rotor spacer plate.

Kodlin by SBS, '10-spoke' brake rotor rear. Black

#709324

Stock:No

Stainless steel with black carrier and black nitrided disc.
11.8" / 300mm OD., 56.3mm I.D., 8.5mm (5/16") counterbored mounting holes with 3.25" bolt circle hole. 5mm thick.
Fits OEM or accessory cast & laced wheels with 3.25" bolt circle mount holes. Mount style 'B'. Repl. 46717-10, 41500088, 41500068.
Designed by Master Designer Kodlin, produced by Brake Specialist SBS. It is just logical that when combining specialists in their respective fields you get the best of both worlds, and that is exactly what happened. Made of a high quality stainless steel, alloyed with a high carbon content, to offer excellent brake performance and reliable stopping power in any condition.
Note: Only the friction area of the black nitrided outer stainless disc will wear away quickly, leaving the rest of the disc black.

Kodlin by SBS, '7-spoke' brake rotor front left. Black

#709316

Stock:Yes