BIKE SELECTOR

17 of 17 search results

Sort on:

With the Conversion disc, you can effortlessly secure Evolution and Twin Cam lowerers in the Milwaukee Eight shock press.
Müeller

Müller, compressor tool conversion disc.

#706929

Stock:Yes

Installs in the transmission end cover. Reduces clutch pull length by 19% and reduces clutch effort by 40%. A great solution for those in search for an easier to pull clutch. ABE approved.
Müeller

Müller, Power Clutch

#950389

Stock:Yes

Müeller

Müller, Hydro Clutch.

#706928

Stock:Yes

Designed for use with with Mueller 588736 and 588737 lowering kits for M8 Softails, but can be used for to install any brand lowering kit. The shock is securely clamped into the press for a safe spring hold. All required steps can easily be carried out for a quick and easy installation of the lowering kit.
Müeller

Müller, M8 shock spring compressor tool

#591263

Stock:Yes

The Hydro Clutch will reduce clutch pull effort by 35% in Twin Cam models. It is a bolt-on light-pull replacement for the stock hydraulic clutch actuator in the transmission end cover. A great solution for those in search for an easier to pull clutchl. Note: Not compatible with models that have the mechanical 'balls' inner & outer ramp clutch actuation system.
Müeller

Müller, Hydro Clutch. Twin Cam

#597513

Stock:Yes

Easily accessible and fully adjustable 40mm lowering kit. Allows adjustment from stock height to a maximum of 40mm lower, with lowering kit installedThis comes with approval. Note: For show use only, non-riding conditions, up to 80mm lowering is obtainable. Note: Also allows adding 30mm to stock suspension height. Note: Installation will require a press. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Müeller

Müller, rear lowering kit Twin Cam

#588735

Stock:Yes

Only the later 2021-up models have an automatic clutch cable adjuster installed, which is made of plastic. The Müller 'Clutch Control' adjuster will replace this poor quality OEM part and allow you to adjust the clutch quick, easy and with perfect precision, without all associated issues of the OEM part for the best possible clutch feel and function. This 'Clutch Control' is especially beneficial for clutch adjustments of 21-up models equipped with OEM plastic adjuster but will physically fit all 18-up models with cable clutch. Note: Compatible with clutch cable models only
Müeller

Müller, M8 'Clutch Control' clutch cable adjuster

#700773

Stock:Yes

Installs in the transmission end cover. Reduces clutch pull length by 19% and reduces clutch effort by around 40%. A great solution for those in search for an easier to pull clutch. ABE approved.
Müeller

Müller, Power Clutch

#950390

Stock:Yes

Installs in the transmission end cover. It reduces clutch pull effort by around 45%. A great solution for those in search for an easier to pull clutch. This Power Clutch 2.0 is currently the best system available. The geometry of the ball pockets were carefully redesigned for an even better & lighter function. Comes complete with the Müller 'Clutch Control' adjuster (separately available as 700773). This 'Clutch Control' cable adjuster is especially beneficial for clutch adjustments of 21-up models but will physically fit all 18-up models with cable clutch. Note: The 2021-up models have an automatic clutch cable adjuster installed, made of plastic. The included Müller metal 'M8 Clutch Control' will replace this poor quality OEM adjuster and allow you to adjust the clutch quick, easy and with perfect precision, without all associated issues of the OEM part for the best possible clutch feel and function. - 45% reduced clutch pull effort - Your clutch hand will thank you - Upgrade replacement for OEM 37000376
Müeller

Müller, M8 Power Clutch 2.0

#700772

Stock:Yes

Fully adjustable 40mm lowering kit. Allows adjustment from stock height to a maximum of 40mm lower. Damper adjustments remain accessible in all cases. Includes pre-installed needle bearings. No damper rod shortening or other permanent modifications required. Installation requires the use of a spring compressor tool. Comes with approval. Note: See 591263 for a Müller spring compressor tool to ease installation. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Müeller

Müller, rear lowering kit M8

#588737

Stock:Yes

Kit includes a drilling and cutting template, a clamping screw and a 6.5mm HSS drill.
Müeller

Müller, internal throttle installation tool

#950384

Stock:Yes

A heavy working throttle is not what you want. At Müller no less then 4 ball bearings and 2 PTFE bushings are used for a no friction, minimal play throttle experience. The narrow part that fits inside the handlebar is 22.3mm which can be machined in a lathe to the required diameter for a perfect fit. Single cable action. Installs with 2 included M6 bolts. Comes complete with installation instructions. Note: Cutting of the right side handlebar is required. Note: An installation tool kit is separately available as 950384. Loctite medium and extra strength is advised and must be purchased separately. Note: Two left side handlebar grips are required with identical 1" inside diameter.
Müeller

Müller, internal throttle

#923338

Stock:Yes

Easily accessible and fully adjustable 40mm lowering kit. Includes installed bearings. Allows adjustment from stock height to a maximum of 40mm lowerThis comes with approval. Note: For show use only, non-riding conditions, up to 80mm lowering is obtainable. Note: Installation will require a press. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Müeller

Müller, rear lowering kit Evo

#588734

Stock:Yes

The Hydro Clutch will reduce clutch pull effort from 35% in Twin Cam and 45% in M8 models. It is a bolt-on light-pull replacement for the stock hydraulic clutch actuator in the transmission end cover. A great solution for those in search for an easier to pull clutch.
Müeller

Müller, Hydro Clutch. Late models

#597514

Stock:Yes

Fully adjustable 40mm lowering kit. Allows adjustment from stock height to a maximum of 40mm lower. Damper adjustments remain accessible in all cases. Includes pre-installed needle bearings. No damper rod shortening or other permanent modifications required. Installation requires the use of a spring compressor tool. Comes with approval. Note: See 591263 for a Mueller spring compressor tool to ease installation. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Müeller

Müller, rear lowering kit M8

#588736

Stock:Yes

Installs in the transmission end cover. Reduces clutch pull length by 19% and reduces clutch effort by around 35%. For M8 models it offers 45% clutch effort reduction. A great solution for those in search for an easier to pull clutch. ABE approved. Note: For 18-up M8 models, especially on 22-up models that are equipped with the poor quality OEM plastic cable adjuster, it is advised to additionally purchase the 700773 Müller 'Clutch Control' cable adjuster that will replace the plastic adjuster to help solve adjustment problems with dragging/slipping or finding neutral gear. Alternatively 700772 'Power Clutch 2.0' is available for 18-up M8 models, which already includes the 700773 'Clutch Control' steel cable adjuster to replace the stock plastic cable adjuster.
Müeller

Müller, Power Clutch

#950387

Stock:Yes

For custom RSD (Right Side Drive) transmissions only. Installs in the transmission end cover. Reduces clutch pull length by 19% and reduces clutch effort by around 40%. For M8 models it offers 45-50% clutch effort reduction. A great solution for those in search for an easier to pull clutch. ABE approved.
Müeller
Discontinued

Müller, power clutch. RSD

#950388

Stock:Yes