BIKE SELECTOR

14 of 14 search results

Sort on:

1/16" (1.6mm) thick. On a 6" x 24" (15cm x 61cm) roll. - Black color - Metal mesh reinforced - Hard to bend - Manufactured from high-temperature steel core/graphite faced exhaust material - Expanded steel core provides stability and maximum torque retention to eliminate gasket failure - Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head - Conforms to and seals minor surface irregularities
Mr Gasket

Mr. Gasket, Ultra Seal gasket material. 1/16" (1.6mm)

#902739

Stock:Yes

Chrome. 1/4-20 threaded. Each wing is approximately 1" (25.4mm) long. Fancy nuts for that special application.
Mr Gasket

Mr. Gasket, Tr-Bar spinner nut

#902704

Stock:Yes

1/16" (1.6mm) thick. White. On a 6" x 24" (15cm x 61cm) roll. - High-Temperature exhaust material - Fairly easy to bend - White colored - Withstands extreme exhaust heat - Provides excellent sealing and durability - Superior tensile strength
Mr Gasket

Mr. Gasket, Performance gasket material. 1/16" (1.6mm)

#902737

Stock:Yes

Thermal sleeving on 25ft. (7.5 meter) rolls with adjustable inside diameter from 1/4" (6.3mm) to 7/16" (11mm). Used to protect delicate wiring from heat. Withstands 1200°F (649°C) continues, peak resistancy 2000°F (1093°C). Non-flammable. Water, fungus and petroleum products resistable.
Mr Gasket

Mr. Gasket, Inferno thermal sleeving. Black

#902714

Stock:Yes

1-1/2" (38mm) wide x 15ft. (7.5 meter) long. Self adhesive backing. Reflects radiant heat away from wiring, lines or cables. Non-flammable. Withstands 1000 °F (538 °C) radiant and 500 °F (260 °C) direct heat. Water, fungus and petroleum product resistable. Note: Do not use on exhaust.
Mr Gasket

Mr. Gasket, Inferno heat shielding tape. 1-1/2" x 15ft.

#902712

Stock:Yes

1/8" (3.2mm) thick. On a 12" x 36" (30.5 x 91.5cm) roll. - Cork gasket material, easy to bend - Light weight - Mainly used in low pressure fluid sealing applications such as timing covers, derby cover, rocker covers etc. - Oil resistant - Up to 135°C
Mr Gasket

Mr. Gasket, cork gasket material. 1/8" (3.2mm)

#902732

Stock:No

1/16" (1.6mm) thick. On a 10" x 10" (25x25cm) roll. - High-Temperature exhaust material - Fairly easy to bend - White colored - Withstands extreme exhaust heat - Provides excellent sealing and durability - Superior tensile strength
Mr Gasket

Mr. Gasket, Performance gasket material. 1/16" (1.6mm)

#902736

Stock:Yes

Black. Standard weave pattern. 2" (51mm) wide. 1/16" (1.6mm) thick. On 25ft. (7.62m) roll. Withstands 1200 °F (649 °C) continues, momentary peak resistancy 2000 °F (1093 °C). Non-flammable. Water, fungus and petroleum product resistable. Note: 30cm of exhaust pipe requires approx. 38" / 97cm (1 3/4" pipe) and 44" / 112cm (2" pipe) exhaust wrap. Based on 2" wide wrap and a wrapping overlap of approx. 1/4". Wrap ends can be secured with universal metal tie-wraps. Note: Material will discolor under influence of heat after installation.
Mr Gasket
Discontinued

Mr. Gasket, Inferno exhaust insulating wrap. 2" wide. Std

#902741

Stock:No

1/4-20 threaded. Plain knurled billet aluminum. 3/4" heigh and 1" diameter.
Mr Gasket
Discontinued

Mr Gasket, billet aluminum nut

#902706

Stock:No

1/16" (1.6mm) thick. On a 12" x 36" (30.5 x 91.5cm) roll. - Cork gasket material, easy to bend - Light weight - Mainly used in low pressure fluid sealing applications such as timing covers, derby cover, rocker covers etc. - Oil resistant - Up to 135°C
Mr Gasket
Discontinued

Mr. Gasket, cork gasket material. 1/16" (1.6mm)

#902731

Stock:No

1/32" (0.8mm) thick. On a 12" x 18" (30.5cm x 46cm) roll. - Compressed gasket material, easy to bend - For use on intake manifold, timing cover, water pump etc - Oil, fuel & coolant resistant. Up to 350°F (176°C)
Mr Gasket
Discontinued

Mr. Gasket, compressed gasket material. 1/32" (0.8mm)

#902733

Stock:No

1/32" (0.8mm) thick on a 9" x 36" (23cm x 91.5cm) roll. Compatible with temperatures up to Up to 350°F (176°C). Fiber is easy to bend, chemically treated and resistant to oil, gasoline and water. For use on transmission side covers etc.
Mr Gasket
Discontinued

Mr. Gasket, Fiber gasket material. 1/32" (0.8mm)

#902729

Stock:No

1/32" (0.8mm) thick. On a 12" x 18" (30.5cm x 46cm) roll. - Compressed gasket material, easy to bend - For use on intake manifold, timing cover, water pump etc - Oil, fuel & coolant resistant. Up to 350°F (176°C)
Mr Gasket
Discontinued

Mr. Gasket, compressed gasket material. 1/16" (1.6mm)

#902734

Stock:No

1/64" (0.4mm) thick on a 9" x 36" (23cm x 91.5cm) roll. Compatible with temperatures up to Up to 350°F (176°C). Fiber is easy to bend, chemically treated and resistant to oil, gasoline and water. For use on transmission side covers etc.
Mr Gasket
Discontinued

Mr. Gasket, Fiber gasket material. 1/64" (0.4mm)

#902728

Stock:No