BIKE SELECTOR

20 of 75 search results

Sort on:

- 300mm wide. - 385mm radius. - 120cm long. - 1.5mm thick steel. Precision made steel custom fender from Peter Penz, designed for Softail models. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Softail fender. 300mm wide

#963614

Stock:Yes

- 315mm wide. - 385mm radius. - 115cm long. - 1.5mm thick steel. Precision made steel custom fender from Peter Penz, designed for Softail models. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Softail fender. 315mm wide. Round

#963615

Stock:Yes

- 340mm wide. - 385mm radius. - 115cm long. - 1.5mm thick steel. Medium length precision made steel custom fender from Peter Penz, designed for Softail models. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Softail fender. 340mm wide

#963618

Stock:Yes

- 355mm wide. - 385mm radius. - 115cm long. - 1.5mm thick steel. Medium length precision made steel custom fender from Peter Penz, designed for Softail models. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Softail fender. 355mm wide. Round

#963619

Stock:Yes

- 105mm wide. - 355mm radius. - 110cm Long. - 1.5mm thick steel. Custom steel front fender by Peter Penz. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, front fender. Slim Snake. 105mm wide

#963622

Stock:Yes

- 335mm wide. - 385mm radius. - 115cm long. - 1.5mm thick steel. Medium length precision made steel custom fender from Peter Penz, designed for Softail models. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Softail fender. 335mm wide. Flat

#963617

Stock:Yes

- 132mm wide. - 380mm radius. - 115cm Long. - 1.5mm thick steel. Custom steel front fender by Peter Penz. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, front fender. No Brackets. 132mm wide

#963627

Stock:Yes

- 125mm wide. - 308mm radius. - 96cm long. - 2mm thick. Flat top styled. Especially designed for bikes without suspension, therefore the fender can be mounted closer to the tire. A special, smaller, radius is used to let the fender 'hug' the tire better, to get that cool low custom look that only a rigid frame can provide. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear rigid frame fender. 125mm wide

#923370

Stock:Yes

- 335mm wide. - 385mm radius. - 115cm long. - 1.5mm thick steel. Medium length precision made steel custom fender from Peter Penz, designed for Softail models. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Softail fender. 335mm wide. Round

#963628

Stock:Yes

- 295mm wide. - 385mm radius. - 120cm long. - 1.5mm thick steel. Precision made steel custom fender from Peter Penz, designed for Softail models. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Softail fender. 295mm wide

#963613

Stock:Yes

- 200mm wide. - 350mm radius. - 107cm long. - 2mm thick. Flat top styled. Especially designed for bikes without suspension, therefore the fender can be mounted closer to the tire. A special, smaller, radius is used to let the fender 'hug' the tire better, to get that cool low custom look that only a rigid frame can provide. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear rigid frame fender. 200mm wide

#923373

Stock:Yes

- 120mm wide. - 355mm radius. - 110cm Long. - 1.5mm thick steel. Custom steel front fender by Peter Penz. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, front fender. Slim Snake. 120mm wide

#963623

Stock:Yes

- 140mm wide. - 360mm radius. - 113cm long. - 2 mm thick. Manufactured by Penz Custombikes to help bike builders to create great one-off bikes. Fenders are available in a width and radius specific selection for that perfect precision tire-fit. Made from 2mm thick steel to give it both strength and great characteristics for welding. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz rear bobber fender, 140mm wide / 360mm radius

#559362

Stock:Yes

- 210mm wide. - 325mm radius. - 102cm long. - 1.5mm thick steel. Round top styled. Designed for bikes without suspension (rigid frames), where the fender can be mounted closer to the tire. A special, smaller, radius is used to let the fender 'hug' the tire better, to get that cool low-down custom look that only a rigid frame can provide. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear rigid frame fender. 210mm wide

#963648

Stock:Yes

- 294mm wide. - 340mm radius. - 140cm long. - 1.5mm thick steel. Round top styled. Designed for bikes without suspension (rigid frames), where the fender can be mounted closer to the tire. A special, smaller, radius is used to let the fender 'hug' the tire better, to get that cool low-down custom look that only a rigid frame can provide. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear rigid frame fender. 294mm wide

#963651

Stock:Yes

- 170mm wide. - 335mm radius. - 104cm long. - 2 mm thick. Manufactured by Penz Custombikes to help bike builders to create great one-off bikes. Fenders are available in a width and radius specific selection for that perfect precision tire-fit. Made from 2mm thick steel to give it both strength and great characteristics for welding. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz rear bobber fender, 170mm wide / 335mm radius

#559367

Stock:Yes

- Wide: 135mm - Radius: 320mm - Length: 115cm - Thickness: 2mm. Manufactured by Peter Penz Custombikes to help bike builders to create great one-off bikes. Fenders are available in a width and radius specific selection for that perfect precision tire-fit. Made from 2mm thick steel to give it both strength and great characteristics for welding. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Ducktail fender. 135mm wide / 320mm radius

#707488

Stock:Yes

- Wide: 135mm - Radius: 365mm - Length: 106cm - Thickness: 2mm. Manufactured by Peter Penz Custombikes to help bike builders to create great one-off bikes. Fenders are available in a width and radius specific selection for that perfect precision tire-fit. Made from 2mm thick steel to give it both strength and great characteristics for welding. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Ducktail fender. 135mm wide / 365mm radius

#707489

Stock:Yes

- Wide: 145mm - Radius: 336mm - Length: 97cm - Thickness: 2mm. Manufactured by Peter Penz Custombikes to help bike builders to create great one-off bikes. Fenders are available in a width and radius specific selection for that perfect precision tire-fit. Made from 2mm thick steel to give it both strength and great characteristics for welding. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Ducktail fender. 145mm wide / 336mm radius

#707491

Stock:Yes

- Wide: 160mm - Radius: 330mm - Length: 97cm - Thickness: 2mm. Manufactured by Peter Penz Custombikes to help bike builders to create great one-off bikes. Fenders are available in a width and radius specific selection for that perfect precision tire-fit. Made from 2mm thick steel to give it both strength and great characteristics for welding. Note: Length is measured around the radius. Width is measured from inside to inside and mentioned for reference only.
Penz

Penz, rear Ducktail fender. 160mm wide / 330mm radius

#707493

Stock:Yes