Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 31 search results

Sort on:

Sort on:

This speaker upgrade kit consist of two 6.5" speakers, two midrange tuning modules and speaker grills for Roadglide, Streetglide and Tourpacks.

Highlights:

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Impermeable polypropylene cone is mechanically rugged and heat resistant

Midrange Notch Filter included for OE pod installation

Co-molded low-density santoprene surround chemically bonded cone

Titanium dome tweeter resists corrosion with high strength-to-density ratio

Low Mass Neodymium earth element magnets for maximum output

1.25" oxygen free copper voice coil on thermally absorbent aluminum former

1" titanium wide dispersion high output hemispherical dome tweeter

2-Ohm for stock replacement

Integrated 6dB high-pass crossover protects tweeter from harmful frequencies

92dB (1w/1m) SPL efficiency / 60-22kHz frequency response

75w RMS power rating / mounting depth: 2.00"

PrecisionPower, 6.5" Fairing speaker upgrade kit 2 Ohm

#999369

Stock:Yes

This speaker upgrade kit consist of two 5.25" speakers and speaker grills for Roadglide, Streetglide and Tourpacks.

Highlights:

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Impermeable polypropylene cone is mechanically rugged and heat resistant

Co-molded low-density santoprene surround chemically bonded cone

Titanium dome tweeter resists corrosion with high strength-to-density ratio

Low Mass Neodymium earth element magnets for maximum output

1.25" oxygen free copper voice coil on thermally absorbent aluminum former

1" titanium wide dispersion high output hemispherical dome tweeter

2-Ohm for stock replacement

Integrated 6dB high-pass crossover protects tweeter from harmful frequencies

92dB (1w/1m) SPL efficiency / 60-22kHz frequency response

75w RMS power rating / mounting depth: 2.00"

PrecisionPower, 5.25" Fairing Speaker Upgrade Kit 2 Ohm

#999371

Stock:Yes

Replacement grills for kit 999383

PrecisionPower, Replacement grills for saddlebag speaker kit

#999384

Stock:No

Precision Power’s direct fitment solution for lower-fairing speakers works excellent on your Touring bikes! Add speaker pods for that additional audio punch, make your motorcycle a concert hall! Housing construction uses high-grade industrial ABS plastic, sure to last the rough impairments on the highway. Each kit is painted only in Vivid Black. Sold with speakers for left and right lowers and includes waterproof quick disconnect plugs for installer-friendly design. Pre-wired for MAA.400 Audio Amplifier (MCS 999394).

Highlights:

Vented lower fairing in gloss black made of industrial grade ABS

Midrange notch filter included for OE pod installation

Waterproof quick-disconnect plugs for easy install & removal

Pre-wired with MAS.654 Premium 6.5” speakers

Plug-N-Play wire harness connects to MAA4.400 Amplifier (MCS 999394)

Wire harness can accommodate installation to alternate amplifier

PrecisionPower, Vented fairing lowers with speakers

#999392

Stock:Yes

This kit allows you to install the Precision Power MAA4.400 (MCS 999394) compact-chassis amplifier in 98-13 Touring motorcycles. Kit includes everything you need to install your new amp, including wiring harnesses, power/ground, Boom Audio bypass plugs, and adapters for lower front and Tour-Pak speakers. You’ll even get mounting hardware.

Highlights:

Brackets for amp installation in Road Glide & Street Glide fairings

T-Harness for plug-n-lay integration to stock wire harness

High-Level input & speaker output connectors for MAA4.400 (MCS 999394)

8ga power & ground wire with in-line fuse holder included

Power & ground wire connector pre-wired for MAA4.400 (MCS 999394)

Wire harness accommodates installation to alternative amplifiers

CVO™ / Boom Audio™ amplifier by-pass plugs included

PrecisionPower, Amplifier installation & wiring Kit

#999396

Stock:Yes

This kit allows you to install the Precision Power MAA4.400 (MCS 999394) compact-chassis amplifier in 2014-up Touring motorcycles. Kit includes everything you need to install your new amp, including wiring harnesses, power/ground, Boom Audio bypass plugs, and adapters for lower front and Tour-Pak speakers. You’ll even get mounting hardware.

Highlights:

Brackets for amp installation in Road Glide & Street Glide fairings

T-Harness for plug-n-lay integration to stock wire harness

High-Level input & speaker output connectors for MAA4.400 (MCS 999394)

8ga power & ground wire with in-line fuse holder included

Power & ground wire connector pre-wired for MAA4.400 (MCS 999394)

Wire harness accommodates installation to alternative amplifiers

CVO™ / Boom Audio™ amplifier by-pass plugs included

PrecisionPower, Amplifier installation & wiring Kit

#999395

Stock:No

ATOM MINI amplifiers adopt the most exemplary Korean Class-D performance, reliability, and this compact footprint fits inside your motorcycle’s fairing. At first glance, you’ll notice several key improvements. All pre-amp & crossover options are conveniently located on one side of this amplifier, while quick-disconnect connection plugs for power and speakers outputs are on the other. You might not notice additions to the circuit board, including improved internal power supply & output stage components. We know you want it loud…
4 x 100w @ 4Ω / 4 x 150 @ 2Ω

Highlights:

State-of-the-Art class D ICaAmplifier technology

2-Ohm Stereo & 4-ohm bridged stable amplifier

Quick disconnect 8g power & 14g speaker wire harness

200mV-6V Low-Level RCA input harnesses included

Signal sensing turn-on on Hi/Speaker level input

Optional variable 12dB/Octave high-pass crossovers

Optional variable 12dB/Octave low-pass / band-pass crossover

Low-Level RCA output harness for daisy chained applications

Dimensions: 5.375”W x 1.875”H x 9.25”L

Note: order model specific installation kit separately. For 98-13 Touring order 999396. For 2014 and later order 999395

PrecisionPower, Atom Mini digital amplifier

#999394

Stock:No

Are you looking to add bass to your Harley-Davidson without all the headaches of matching up an amplifier or, even worse, taking away the saddlebag structure’s integrity? Precision Power has created the SBW powered saddlebag drop-in subwoofer, a perfect marriage of the custom enclosure, subwoofer, and built-in digital amplifier that allows you to avoid complicated mathematics. You’ll love the powerful impact this enclosure adds to your favorite tracks, and you’ll rest easy knowing that you’re getting state-of-the-art performance from Precision Power.

The SBW saddlebag speaker comes equipped with a custom subwoofer paired with a passive radiator to increase bass response with a built-in 300-watt digital amplifier. Neodymium Magnet Motor enhances the subwoofer’s motors’ strength; it is also extremely light, which means more output and less weight. The sealed enclosure provides optimum sound quality, and the rugged rotational molded ABS plastic protects them wherever you ride or travel. High- and low-level adjustment switches allow you to connect it to any configuration, the system plug-n-plays behind either OE Harley-Davidson radios or even aftermarket Apple CarPlay & Android Auto replacement radio.

With all this new bass comes new technology… Well Sorta… The Product Development team came up with a solution to port bass coming from your saddles without destroying the structure of each saddlebag. Each subwoofer kit comes with ported grommets equipped with a unique membrane allowing sound to pass through while keeping the elements out. It’s specific technology all of you know and have experienced in sports earbuds; it’s the special membrane that’s the genius behind this product; you’re welcome.

Highlights:

Down-Firing subwoofer enclosure made of industrial grade ABS

Class-D subwoofer amplifier with fault protection built-in

Enclosure made of industrial grade ABS (Rotomolded)

Waterproof quick-disconnect plugs for easy install/removal in the saddlebag

Custom active subwoofer with low-frequency added passive radiator

Waterproof hydrophonic grommet membrane included

Plug-n-Play harnesses included for stock or aftermarket radio

Note: see 999390 for right side SBW saddlebag subwoofer

PrecisionPower, SBW saddlebag subwoofer left side

#999389

Stock:Yes

These tweeters can be mounted in the OEM batwing fairing gauge hole and are plug-n-play with the OE wire harness.

Highlights:

Titanium ring radiator tweeter increases efficiency & high-frequency transients

Diecast aluminum chassis molded for installation in original fairing gauge hole

Accommodates OEM & aftermarket gauge trim rings

Low mass neodymium rare earth element magnets for maximum output

Integrated horn & phase plug improve high-frequency dispersion patterns

Plug-n-Play t-harness included for quick integration to OEM speaker wire

Integrated 12dB 4kHz high-pass crossover & overload protection circuit breaker

50w RMS,100w MAX, 105dB SPL, 4kHz-22kHz Frequency response

Note: replacement tweeter diaphragm available as 999373

PrecisionPower, Pro audio fairing tweeters

#999372

Stock:Yes

For 999374 Tweeter

PrecisionPower, Replacement tweeter diaphragm

#999375

Stock:Yes

For 999372 Tweeter

PrecisionPower, Replacement tweeter diaphragm

#999373

Stock:Yes

MAS speakers are created explicitly for Touring motorcycles. These strong, weather-resistant coaxial speakers fit right into the factory fairing and Tour Pak locations and pack plenty of impact in their compact frame.

Highlights:

MAS.652HT: 150w RMS, 300w MAX, 93dB SPL, 100-22kHz Frequency Response

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Low Mass Neodymium earth element magnets for maximum output

Polypropylene coated paper cone for extreme performance & water resistance

Titanium ring radiator tweeter increases efficiency & high-frequency transients

Integrated horn & phase plug improve high-frequency dispersion patterns

1.75” Oxygen free copper voice coil on thermally absorbent aluminum former

Bi-Amp Input Terminals for Tweeter, Jumper Included for Standard Operation

Powder coated black metal grills included

Integrated 12dB high-pass crossover protects tweeter from harmful frequencies

Mounting depth: 2.75"

PrecisionPower, 6.5" High efficiency Horn Loaded Speaker

#999400

Stock:Yes

MAS speakers are created explicitly for Touring motorcycles. These strong, weather-resistant coaxial speakers fit right into the factory fairing and Tour Pak locations and pack plenty of impact in their compact frame.

Highlights:

MAS.692HT: 200w RMS, 400w MAX, 95dB SPL, 80-22kHz Frequency Response

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Low Mass Neodymium earth element magnets for maximum output

Polypropylene coated paper cone for extreme performance & water resistance

Titanium ring radiator tweeter increases efficiency & high-frequency transients

Integrated horn & phase plug improve high-frequency dispersion patterns

1.75” Oxygen free copper voice coil on thermally absorbent aluminum former

Bi-Amp Input Terminals for Tweeter, Jumper Included for Standard Operation

Powder coated black metal grills included

Integrated 12dB high-pass crossover protects tweeter from harmful frequencies

Mounting depth: 2.75"

PrecisionPower, 6"x 9" High efficiency Horn Loaded Speaker

#999401

Stock:Yes

MAS speakers are created explicitly for Touring motorcycles. These strong, weather-resistant coaxial speakers fit right into the factory fairing and Tour Pak locations and pack plenty of impact in their compact frame.

Highlights:

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Impermeable polypropylene cone is mechanically rugged and heat resistant

Co-molded low-density santoprene surround chemically bonded cone

Titanium dome tweeter resists corrosion with high strength-to-density ratio

Low Mass Neodymium earth element magnets for maximum output

1.25" oxygen free copper voice coil on thermally absorbent aluminum former

1" titanium wide dispersion high output hemispherical dome tweeter

2-Ohm for stock replacement

Integrated 6dB high-pass crossover protects tweeter from harmful frequencies

92dB (1w/1m) SPL efficiency / 60-22kHz frequency response

75w RMS power rating / mounting depth: 2.50"

PrecisionPower, 6.5" MAS fairing speakers 2 Ohm

#999378

Stock:No

MAS speakers are created explicitly for Touring motorcycles. These strong, weather-resistant coaxial speakers fit right into the factory fairing and Tour Pak locations and pack plenty of impact in their compact frame.

Highlights:

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Impermeable polypropylene cone is mechanically rugged and heat resistant

Co-molded low-density santoprene surround chemically bonded cone

Titanium dome tweeter resists corrosion with high strength-to-density ratio

Low Mass Neodymium earth element magnets for maximum output

1.25" oxygen free copper voice coil on thermally absorbent aluminum former

1" titanium wide dispersion high output hemispherical dome tweeter

2-Ohm for stock replacement

Integrated 6dB high-pass crossover protects tweeter from harmful frequencies

92dB (1w/1m) SPL efficiency / 60-22kHz frequency response

75w RMS power rating / mounting depth: 2.50"

PrecisionPower, 5.25" MAS fairing speakers 2 Ohm

#999380

Stock:Yes

Are you looking to add bass to your Harley-Davidson without all the headaches of matching up an amplifier or, even worse, taking away the saddlebag structure’s integrity? Precision Power has created the SBW powered saddlebag drop-in subwoofer, a perfect marriage of the custom enclosure, subwoofer, and built-in digital amplifier that allows you to avoid complicated mathematics. You’ll love the powerful impact this enclosure adds to your favorite tracks, and you’ll rest easy knowing that you’re getting state-of-the-art performance from Precision Power.

The SBW saddlebag speaker comes equipped with a custom subwoofer paired with a passive radiator to increase bass response with a built-in 300-watt digital amplifier. Neodymium Magnet Motor enhances the subwoofer’s motors’ strength; it is also extremely light, which means more output and less weight. The sealed enclosure provides optimum sound quality, and the rugged rotational molded ABS plastic protects them wherever you ride or travel. High- and low-level adjustment switches allow you to connect it to any configuration, the system plug-n-plays behind either OE Harley-Davidson radios or even aftermarket Apple CarPlay & Android Auto replacement radio.

With all this new bass comes new technology… Well Sorta… The Product Development team came up with a solution to port bass coming from your saddles without destroying the structure of each saddlebag. Each subwoofer kit comes with ported grommets equipped with a unique membrane allowing sound to pass through while keeping the elements out. It’s specific technology all of you know and have experienced in sports earbuds; it’s the special membrane that’s the genius behind this product; you’re welcome.

Highlights:

Down-Firing subwoofer enclosure made of industrial grade ABS

Class-D subwoofer amplifier with fault protection built-in

Enclosure made of industrial grade ABS (Rotomolded)

Waterproof quick-disconnect plugs for easy install/removal in the saddlebag

Custom active subwoofer with low-frequency added passive radiator

Waterproof hydrophonic grommet membrane included

Plug-n-Play harnesses included for stock or aftermarket radio

Note: see 999387 for left side SBW saddlebag subwoofer

PrecisionPower, SBW saddlebag subwoofer right side

#999388

Stock:Yes

6″ x 9″ Saddlebag lid speaker installation kit lets you add almost any speakers to your factory bag lids. Designed for 14-up H-D models with hard-shell bags. The kit is intended and meant to fit ideally with MAS.69 speakers (MCS 999376/999377/999401).
The installer-friendly cutting guide and mounting arrangement means you can enjoy the more powerful sound without replacing the saddlebags or dealing with painting. Kit includes all hardware and integrated grilles. Not compatible with models with electric locks.

Highlights:
- Adapters to install 6” x 9” speaker to stock saddlebag lid
- Saddlebag lid cutout template for exact fitment included
- Gloss black speaker grills with premium fit-n-finish included
- Plug-N-Play wire harness connects to MAA4.400 amplifier
- Waterproof quick-disconnect plugs for easy install & removal in saddlebag
- Optimized for MAS.69 6”x9” Speakers (MCS 999376/999377)

PrecisionPower, Saddlebag lid speaker installation kit

#999383

Stock:Yes

Replacement subwoofer for kits 999387,999388,999389,999390

PrecisionPower, Replacement Subwoofer

#999391

Stock:No

Replacement grills for kit 999385

PrecisionPower, Replacement grills for saddlebag speaker kit

#999386

Stock:Yes

This speaker upgrade kit consist of two 6.5" speakers, two midrange tuning modules and speaker grills for Roadglide, Streetglide and Tourpacks.

Highlights:

Manufactured with industrial grade materials optimized for harsh environments

Glass fiber reinforced ABS frame for impact absorption and thermal stability

Impermeable polypropylene cone is mechanically rugged and heat resistant

Midrange Notch Filter included for OE pod installation

Co-molded low-density santoprene surround chemically bonded cone

Titanium dome tweeter resists corrosion with high strength-to-density ratio

Low Mass Neodymium earth element magnets for maximum output

1.25" oxygen free copper voice coil on thermally absorbent aluminum former

1" titanium wide dispersion high output hemispherical dome tweeter

4-Ohm for custom applications

Integrated 6dB high-pass crossover protects tweeter from harmful frequencies

92dB (1w/1m) SPL efficiency / 60-22kHz frequency response

75w RMS power rating / mounting depth: 2.00"

PrecisionPower, 6.5" Fairing speaker upgrade kit 4 Ohm

#999370

Stock:No