Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 53 search results

Sort on:

Sort on:

Olive green RAL 6003. 10 liter. 2.92kg. 345x165x275mm high. For liquid fuels. Manufactured from steel sheet material that is of a welded design. The jerrycan is externally and internally painted to help prevent rust. Classic safe lock with cotter pin. UN approved.

Note: For optional discharge spouts see 599736 rigid and 599737 flexible. For a replacement rubber gasket see 599739.
Note: As of 01.06.2015, all fuel cans (UN) must be marked by the end user in accordance with the GHS / CLP Regulation. For identification the correct diesel or gasoline labels must be used.
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pressol, metal jerrycan. Olive green, 10 liter

#599719

Stock:Yes

Workshop spray can for solvents with a separate hand pump and spray knob. Used for ketone fluids, such as acetone and most of the hydrocarbons, as well as all low viscosity oils, cold cleaners, brake cleaners, thinners, silicone removers and alcohols such as isopropyl.
Comes with a transparent HDPE (high density polyethylene) 1.5 liter container, that can be filled to a maximum of 1.2 liters, and comes with a scale in ml.
Max. 2.5 bar, with over-pressure / venting valve. With a PA (polyamide) pump head and a PA flat spray nozzle with a 110° spray angle that sprays up to 192ml/min.
Temperature range +5°C to +30°C. Dimensions: Base 230mm x 120mm x 325mm high. Weight 0.45kg.

Pressol, SPRAYFlxx solvent plus, 1.5 liter spray can

#599728

Stock:Yes

Copper. 55 gram. Cures in 5 minutes. A two component epoxy resin reinforced with metal powder. The chemical components are matched to form the best bond to the materials that are to be joined or repaired and offer a durable and quick solution for metal repairs without cracking or twisting. When cured it can be filed, drilled, tapped and painted. Idées-Fix is weatherproof, resistant to CFC (chlorofluorocarbons), solvents and high temperatures.

Pressol, Idées-Fix moldable metal. Copper, 55 grams

#599730

Stock:Yes

Olive green RAL 6003. 5 liter. 1.7kg. 310x120x230mm high. For liquid fuels. Manufactured from steel sheet material that is of a welded design. The jerrycan is externally and internally painted to help prevent rust. Classic safe lock with cotter pin. UN approved.

Note: For optional discharge spouts see 599736 rigid and 599737 flexible. For a replacement rubber gasket see 599739.
Note: As of 01.06.2015, all fuel cans (UN) must be marked by the end user in accordance with the GHS / CLP Regulation. For identification the correct diesel or gasoline labels must be used.
Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Pressol, metal jerrycan. Olive green, 5 liter

#599718

Stock:Yes

750cc. 313mm high x 100mm diameter. Red HDPE (high density polyethylene) container with a black spray head made from special plastic. Sprays 1.4cc per stroke with a 50° spray angle. Recommended for use with thin liquids as lubricants, disinfectants, brake cleaners, cleaners from industrial and automotive industry areas. Allows use, with the container in a horizontal position, through a special plastic suction hose. It is advised to thoroughly flush the system with clean water after use.

Pressol, industrial fluid sprayer. Red, 750cc

#599700

Stock:Yes

500cc with 165mm spout. Dimensions: 350mm high x 135mm to 70mm diameter. White HDPE (high density polyethylene) container with double-acting brass/zinc pump and an angled aluminum spout. Robust and virtually impact proof. The ball bearing mounted and gravity controlled suction tub enables the container to be almost completely emptied. Pump enables drip feed. With 2 ball valves. Sealing mechanism comes with drip collector pan.

Note: For optional parts see 599694 spout with micro sprayer and 599695 spout with applicator brush.

Pressol workshop oiler, white with spout. 500 ml

#599693

Stock:Yes

11 liter black polyethylene fill can for engine coolant. 75mm filler opening with sealing cap and strainer. 32cm high, base 65cm x 20cm. Weight 0.6kg.

Pressol, coolant fill can. Black, 11 liter

#599720

Stock:Yes

Fits the optional 599736 rigid and 599737 flexible discharge spouts for 599718 5 liter, 599719 10 liter, 599734 20 liter and 599735 20 liter metal jerrycans.

Pressol, repl. rubber gasket for metal discharge spouts

#599739

Stock:Yes

1000cc. 341mm high x 110mm diameter. Red HDPE (high density polyethylene) container with a black spray head made from special plastic. Sprays 1.4cc per stroke with a 50° spray angle. Recommended for use with thin liquids as lubricants, disinfectants, brake cleaners, cleaners from industrial and automotive industry areas. Allows use, with the container in a horizontal position, through a special plastic suction hose. It is advised to thoroughly flush the system with clean water after use.

Pressol, industrial fluid sprayer. Red, 1000cc

#599701

Stock:Yes

For use with 400 gram grease cartridges, according to DIN 1284.

Pressol, follower plate grease cartridge

#599717

Stock:Yes

Optional spout for workshop oilers with applicator brush. Used to apply a consistent lubricant film over a larger area.
Dimensions 15mm diameter x 135mm long

Note: Compatible with Pressol 599691, 599692 and 599693 workshop oilers.

Pressol, spout with applicator brush

#599695

Stock:Yes

Black with regular 2-handed grip style. Pressure up to 400 bar. Takes 400 gram grease cartridges. Grease supply is adjustable from 0.1ml. to 2.15ml. per stroke Pressure side is M10x1.00 threaded. With a 300mm long x 11mm diameter high pressure hose with a precision machined 4 claw coupler that is M10x1.00 male threaded. Operates with NLGI 2 greases at at least 10°C and includes 10 follower plates. Quantity of delivered grease at a back-pressure of 200 bar nearly unchanged after 40.000 operating cycles. Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication). Dimensions: 330mm x 140mm x 66mm diameter. Weight 1.02kg.

Pressol, EasyFill dual handed grease gun. Black

#599733

Stock:Yes

Designed for especially difficult to access lubrication points. Quick-coupler to connect to current couplers - no assembly required (plug and play). Turned and hardened 4-jaw precision coupler to guarantee safe lubrication. Special compact design.

Pressol, angled grease coupler

#702273

Stock:Yes

Fits 599718 5 liter, 599719 10 liter, 599734 20 liter and 599735 20 liter metal jerrycans.

Pressol, discharge spout for metal jerrycans, flexible

#599737

Stock:Yes

200cc with 135mm spout. Dimensions: 270mm high x 85mm to 60mm diameter. White HDPE (high density polyethylene) container with double-acting brass/zinc pump and an angled aluminum spout. Robust and virtually impact proof. The ball bearing mounted and gravity controlled suction tub enables the container to be almost completely emptied. Pump enables drip feed. With 2 ball valves. Sealing mechanism comes with drip collector pan.

Note: For optional parts see 599694 spout with micro sprayer and 599695 spout with applicator brush.

Pressol workshop oiler, white with spout. 200 ml

#599691

Stock:Yes

250cc. Dimensions: 135mm to 70mm diameter x 110mm high. Blue steel container with a 1cc per stroke pumping single action brass pump and an angled 135mm long aluminum spout. An additional flexible and translucent 210mm long (see-through) PVC Superflex spout is included. Pump enable drip feed and comes with 2 ball valves.

Pressol, standard workshop oiler with spout. 250cc

#599696

Stock:Yes

500cc. Dimensions: 145mm to 85mm diameter x 150mm high. Blue steel container with a 1cc per stroke pumping single action brass pump and an angled 135mm long aluminum spout. An additional flexible and translucent 210mm long (see-through) PVC Superflex spout is included. Pump enable drip feed and comes with 2 ball valves.

Pressol, standard workshop oiler with spout. 500cc

#599697

Stock:Yes

Optional micro spray spout for workshop oilers, manufactured from aluminum with a precision brass nozzle. Used for micro-fine spraying of low viscosity oils and self-lubricating and non-aggressive liquids.
Dimensions: 10mm diameter x 118mm long

Note: Compatible with Pressol 599691, 599692 and 599693 workshop oilers.

Pressol, spout with micro sprayer

#599694

Stock:Yes

300cc with 165mm spout. Dimensions: 320mm high x 120mm to 70mm diameter. White HDPE (high density polyethylene) container with double-acting brass/zinc pump and an angled aluminum spout. Robust and virtually impact proof. The ball bearing mounted and gravity controlled suction tub enables the container to be almost completely emptied. Pump enables drip feed. With 2 ball valves. Sealing mechanism comes with drip collector pan.

Note: For optional parts see 599694 spout with micro sprayer and 599695 spout with applicator brush.

Pressol workshop oiler, white with spout. 300 ml

#599692

Stock:Yes

Aluminum. 50 gram. Cures in 20 minutes. A two component epoxy resin reinforced with metal powder. The chemical components are matched to form the best bond to the materials that are to be joined or repaired and offer a durable and quick solution for metal repairs without cracking or twisting. When cured it can be filed, drilled, tapped and painted. Idées-Fix is weatherproof, resistant to CFC (chlorofluorocarbons), solvents and high temperatures.

Pressol, Idées-Fix moldable metal. Aluminum, 50 grams

#599731

Stock:No