Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 20 search results

Sort on:

Sort on:

Black anodized machined aluminum construction. Fits over the head bolts on Evolution B.T., Twin Cam and Sportster models. Each cover secures with the included allen head (socket head) set screws. Complete with hex key for installation.

Riverside Custom, head bolt cover kit. Black aluminum

#954005

Stock:Yes

12mm rod, 5/16 mount holes, cen-cen adj. from approx. 30.2cm to 32cm

Riverside, shifter rod, stainless steel

#954010

Stock:Yes

Chrome. Billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Riverside, Bakelite® retro handlebar grip set. Chrome

#954011

Stock:Yes

Black anodized billet aluminum with chrome plated end caps.

Riverside, Knurled billet aluminum grips. Black

#954028

Stock:Yes

Chrome plated machined aluminum construction. Fits over the head bolts on Evolution B.T., Twin Cam and Sportster models. Each cover secures with the included Allen head (socket head) set screws. Complete with hex key for installation.

Riverside Custom, head bolt cover kit. Chrome aluminum

#954004

Stock:Yes

Chrome. Designed for use with custom internal throttle grips. Both grips have an internal diameter of 1". These grips are made from billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Riverside, Bakelite® retro handlebar grip set. Int. throttle

#954002

Stock:No

Polished stainless steel shift linkage end / ball joint / heim joint.
5/16-24 threaded with a 5/16" (8mm) mount hole.
The finishing touch to a stylish shifter rod set-up.
OEM replacement reference 33871-85B.

Riverside, shifter rod end. Stainless

#954008

Stock:Yes

8mm rod, 5/16 mount holes, cen-cen adj. from approx. 30.2cm to 32cm

Riverside, shifter rod, stainless steel

#954009

Stock:Yes

Black anodized billet aluminum with chrome plated end caps.

Riverside, Knurled billet aluminum grips. Black

#954014

Stock:Yes

Black anodized billet aluminum with chrome plated end caps. The internal throttle grips are designed for use with a custom internal throttle grip, where both grips have an internal diameter of 1".

Riverside knurled billet aluminum grips black

#954015

Stock:Yes

Black anodized. Billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Riverside, Bakelite® retro handlebar grip set. Black

#954001

Stock:Yes

Mounts to OEM floorboards of all 80-up Harley models equipped with rider floorboards. Perfect to stretch your legs on long hauls, without having to stop.
Note: Installation will require modifications to the floorboard.

Riverside, footrest kit for rider floorboards

#954007

Stock:Yes

Chrome. Billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Riverside, Bakelite® retro handlebar grip set. Chrome

#954000

Stock:Yes

Black anodized. Designed for use with custom internal throttle grips. Both grips have an internal diameter of 1". These grips are made from billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Riverside, Bakelite® retro handlebar grip set. Int. throttle

#954003

Stock:No

Heating units, 50W (approx. 4 Amp@12 Volt) for use inside handlebars. No special grips required, nothing to see on the outside. Fits bars with a inner diameter of 22mm and secures with a set-screw. The heating elements can be machined down, if required, to a minimum of 18mm.
Note 1: Will not fit e-throttle models.
Note 2: When you decide to glue the heating elements inside the handlebar, make sure a special heat resistant glue is used.

Riverside, grip heaters

#954006

Stock:Yes

Universal ON-OFF switch, complete with relay. Will switch anything that needs to be switched, like handlebar heaters, fog lights etc. Perfect solution for a prominently shown, or hidden, custom switch on just about any custom or stock bike. Complete with aluminum mount bracket and rear cover. Complete with pre-installed wiring.
- Cable length approximately 1m long x 4.9mm OD
- Mount hole is 6.5mm for 6mm or 1/4" bolts
- IP67 water/dust proof rating.
Note: Late model H-D with CAN-bus wiring, like 11-up Softail; 12-17 Dyna; 14-up Touring; 14-22 XL Sportster, will additionally require OEM 72673-11 electrical Y-harness connection kit which plugs into the data port (OBD / On Board Diagnostics plug) to provide a 12 volt lead.

Riverside, handlebar ON-OFF switch kit

#955836

Stock:No

Black anodized. Billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Riverside, Bakelite® retro handlebar grip set. Black

#954013

Stock:No

Billet aluminum with slotted black anodized grip surface and chrome plated end caps.

Riverside, aluminum grips. Black

#954016

Stock:Yes

Billet aluminum with slotted black anodized grip surface and chrome plated end caps.

Riverside, aluminum grips. Black

#954020

Stock:Yes

Billet aluminum with slotted black anodized grip surface and chrome plated end caps.
Designed for use when using a custom internal throttle grip, where both grips have an internal diameter of 1" (25.4mm).

Riverside, aluminum grips. Black. Internal throttle

#954024

Stock:Yes