Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 132 search results

Sort on:

Sort on:

Used to move the turn signals to the frame down-tubes, below the fuel tank. Bracket tube is hollow to route wiring and 8mm threaded for use with all custom turn signals that have 8mm threads. Complete with installation hardware. Gloss black powder coated steel.
Note: Not compatible with engine guards.

Westland Customs, front turn signal bracket 28cm. Black

#941550

Stock:Yes

Made of 2mm thick quality raw (uncoated) steel that may require small fitment modifications. Used to install on the frame and cover the internals of the bike, when a solo seat is installed. Installation will require cutting of the rear frame. Also requires custom fabrication of two installation points on the frame for installation of this cover.

Westland Custom, solo seat mount frame cover. Raw steel

#923872

Stock:Yes

Laser cut 2mm thick aluminum front fender installation brackets. Easy to bend or cut for best fitment. Carefully designed to cover wide application options on many front forks and custom fenders. Complete with M6 bolts & nuts for mounting the fender to the brackets. Mount holes for bracket to fork are not drilled, allowing any custom height installation.
Includes 2 brackets and hardware.

Note: For dimensions see drawing.

Westland Customs, front fender mount kit

#923873

Stock:Yes

High quality steel crash bars / engine guards. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with 2mm wall thickness. Complete with installation hardware.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs engine guard, chrome

#923796

Stock:No

Black. For French license plates measuring 210mm x 130mm. Not designed for use with a taillight. License plate illumination must be ordered separately as 943294. Made from 1.5mm thick steel, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick steel.
Note: Not designed for installation of a taillight.
Note: License plate illumination light is not included and can be ordered separately as 943294.

Westland Customs, side mount license plate bracket France

#941564

Stock:No

Black. With an extra long bracket allowing additional forward/backward adjustment options. Not designed for use with a taillight and license plate illumination must be ordered separately. For Dutch (NL) and Belgian (B) license plates measuring 145mm x 210mm. Made from 1.5mm thick aluminum, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick material.

Note: License plate illumination not included and must be ordered separately.
Note: Not designed for installation of a taillight.
Note: Available with a series of different mounting point diameters to best suit your specific application.
- 923759 10.5mm mount hole. Lower shock mount for most Japanese bikes.
- 923760 13mm mount hole. Lower shock mount for many H-D models.
- 923761 20mm mount hole. Wheel axle mount for many pre-2013 H-D models & customs with 3/4" (19mm) wheel axle.
- 923762 26mm mount hole. Wheel axle mount for many 00-up H-D models & Customs with 1" (25.4mm) or 25mm wheel axle.

Westland Customs, side mount license plate bracket NL/B

#923761

Stock:Yes

Black. For German license plates measuring 180mm x 200mm. Not designed for use with a taillight. License plate illumination must be ordered separately as 943294. Made from 1.5mm thick steel, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick steel.
Note: Not designed for installation of a taillight.
Note: License plate illumination light is not included and can be ordered separately as 943294.

Westland Customs, side mount license plate bracket Germany

#941560

Stock:No

For universal fabrication purposes. Not coated.

Westland Customs, sheet metal plate. Steel, 58x38cm x 1mm

#923855

Stock:Yes

Black. With an extra long bracket allowing additional forward/backward adjustment options. Not designed for use with a taillight and license plate illumination must be ordered separately. For Dutch (NL) and Belgian (B) license plates measuring 145mm x 210mm. Made from 1.5mm thick aluminum, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick material.

Note: License plate illumination not included and must be ordered separately.
Note: Not designed for installation of a taillight.
Note: Available with a series of different mounting point diameters to best suit your specific application.
- 923759 10.5mm mount hole. Lower shock mount for most Japanese bikes.
- 923760 13mm mount hole. Lower shock mount for many H-D models.
- 923761 20mm mount hole. Wheel axle mount for many pre-2013 H-D models & customs with 3/4" (19mm) wheel axle.
- 923762 26mm mount hole. Wheel axle mount for many 00-up H-D models & Customs with 1" (25.4mm) or 25mm wheel axle.

Westland Customs, side mount license plate bracket NL/B

#923762

Stock:No

Black. For German license plates measuring 180mm x 200mm. Not designed for use with a taillight. License plate illumination must be ordered separately as 943294. Made from 1.5mm thick steel, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick steel.
Note: Not designed for installation of a taillight.
Note: License plate illumination light is not included and can be ordered separately as 943294.

Westland Customs, side mount license plate bracket Germany

#941563

Stock:No

High quality steel crash bars / engine guards. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with 2mm wall thickness. Complete with installation hardware.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs engine guard, chrome

#923831

Stock:Yes

High quality steel crash bars / engine guards. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with 2mm wall thickness. Complete with installation hardware.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs engine guard, chrome

#923830

Stock:No

Black. For French license plates measuring 210mm x 130mm. Not designed for use with a taillight. License plate illumination must be ordered separately as 943294. Made from 1.5mm thick steel, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick steel.
Note: Not designed for installation of a taillight.
Note: License plate illumination light is not included and can be ordered separately as 943294.

Westland Customs, side mount license plate bracket France

#941561

Stock:No

Black. For United Kingdom license plates measuring 178mm x 227mm. Not designed for use with a taillight. License plate illumination must be ordered separately as 943294. Made from 1.5mm thick steel, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick steel.
Note: Not designed for installation of a taillight.
Note: License plate illumination light is not included and can be ordered separately as 943294.

Westland Customs, side mount license plate bracket UK

#941565

Stock:No

Black. For French license plates measuring 210mm x 130mm. Not designed for use with a taillight. License plate illumination must be ordered separately as 943294. Made from 1.5mm thick steel, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick steel.
Note: Not designed for installation of a taillight.
Note: License plate illumination light is not included and can be ordered separately as 943294.

Westland Customs, side mount license plate bracket France

#941555

Stock:No

44.5mm (1-3/4") x 1.5mm thick x 98cm long. High quality raw steel tube. Bend quality and easy to weld. Ready for plating, paint or powder coating.

Westland Customs, steel tubing 44.5mm (1-3/4") x 98cm long

#923786

Stock:Yes

Black. With an extra long bracket allowing additional forward/backward adjustment options. Not designed for use with a taillight and license plate illumination must be ordered separately. For Dutch (NL) and Belgian (B) license plates measuring 145mm x 210mm. Made from 1.5mm thick aluminum, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick material.

Note: License plate illumination not included and must be ordered separately.
Note: Not designed for installation of a taillight.
Note: Available with a series of different mounting point diameters to best suit your specific application.
- 923759 10.5mm mount hole. Lower shock mount for most Japanese bikes.
- 923760 13mm mount hole. Lower shock mount for many H-D models.
- 923761 20mm mount hole. Wheel axle mount for many pre-2013 H-D models & customs with 3/4" (19mm) wheel axle.
- 923762 26mm mount hole. Wheel axle mount for many 00-up H-D models & Customs with 1" (25.4mm) or 25mm wheel axle.

Westland Customs, side mount license plate bracket NL/B

#923759

Stock:Yes

Black. For United Kingdom license plates measuring 178mm x 227mm. Not designed for use with a taillight. License plate illumination must be ordered separately as 943294. Made from 1.5mm thick steel, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick steel.
Note: Not designed for installation of a taillight.
Note: License plate illumination light is not included and can be ordered separately as 943294.

Westland Customs, side mount license plate bracket UK

#941562

Stock:No

Black. For United Kingdom license plates measuring 178mm x 227mm. Not designed for use with a taillight. License plate illumination must be ordered separately as 943294. Made from 1.5mm thick steel, with a black wrinkle powder coated finish. For left and right side use. The horizontal elongated mounting holes allow further horizontal adjustments for a snug fit on the bike. The L-shaped mount bracket is 35mm wide and made of 6mm thick steel.
Note: Not designed for installation of a taillight.
Note: License plate illumination light is not included and can be ordered separately as 943294.

Westland Customs, side mount license plate bracket UK

#941559

Stock:No

High quality steel crash bar / engine guard. Manufactured of 1-1/4" (32mm) cold-band steel tubing (Certified EN 10305-3 CR1 E195 S5) with a 2mm wall thickness.

Note: For protection in tip-over events only. Not designed to offer safety in high speed crashes.

Westland Customs, engine guard. Chrome

#923840

Stock:Yes