BIKE SELECTOR

20 of 50 search results

Sort on:

We offer removable cheek pads for the Biltwell Bonanza helmet so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference. Brushed fleece Lycra material wicks sweat from skin for greater comfort, open-cell foam inside pads increases airflow and accelerates drying, stainless-steel snaps on ABS plastic pad backing for speedy removal and installation, hand-stitched construction, available in different thicknesses for a custom fit, sold in pairs.
Biltwell

Biltwell Bonanza cheek pad set - 16mm

#568690

Stock:No

With stainless steel screws. Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in anodized colors so you can fine-tune the look of your helmet. NOTE! Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN. Each kit includes two screws and two washers.
Biltwell

Biltwell Helmet Gen2 Hardware Kit black

#913351

Stock:No

With stainless steel screws. Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in anodized colors so you can fine-tune the look of your helmet. NOTE! Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN. Each kit includes two screws and two washers.
Biltwell

Biltwell Helmet Gen2 Hardware Kit blue

#913355

Stock:Yes

Adjust cheek pads to your morphology for optimal comfort!
Roof

Roof V8 neck lining

2 variants

Stock:Yes

Adjust cheek pads to your morphology for optimal comfort!
Roof

Roof Boxxer carbon wind guard

#947747

Stock:Yes

Restore that fresh out of the box feeling with a new liner and padding for your John Doe JD/ONE helmet. Easily installs with a tabbed hook and look securing system.
John Doe

John Doe Helmet padding / inner lining

5 variants

Stock:Yes

Installs with clamp to 7/8" (22mm) to 1-1/4" (32mm) diameter frame tubes, engine guards, handlebars, etc.
Kuryakyn

Kuryakyn Helmet lock black 22mm

#599656

Stock:Yes

Installs with clamp to 1-1/4" (32mm) to 1-1/2" (38mm) diameter frame tubes, engine guards, handlebars, etc.
Kuryakyn

Kuryakyn Helmet lock black 32mm

#599657

Stock:Yes

Restore that fresh out of the box feeling with a new liner and cheek pads. One interior comfort liner and two cheek pads are included with each kit, and installation is easy using button snaps.
Biltwell

Biltwell ECE Lane Splitter helmet liner

5 variants

Stock:Yes

Simpson

Simpson Mask for Chopper Black

#703507

Stock:Yes

With stainless steel screws. Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in anodized colors so you can fine-tune the look of your helmet. NOTE! Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN. Each kit includes two screws and two washers.
Biltwell

Biltwell Helmet Gen2 Hardware Kit gold

#913357

Stock:Yes

By City Roadster replacement helmet liners
By City

By City Roadster Interior

#590679

Stock:Yes

Simpson

Simpson Visor fitting kit for Venom

#999576

Stock:Yes

Installs with clamp to 7/8" (22mm) to 1-1/4" (32mm) diameter frame tubes, engine guards, handlebars, etc.
Kuryakyn

OEM style helmet lock black

#508993

Stock:Yes

This is a replacement baseplate kit for By City Roadster helmets. This kit will allow you to repair or replace one of the baseplates that mount your helmet’s shield.
By City

By City Roadster Hardware kit silver

#590680

Stock:Yes

John Doe offers removable cheek pads for your ECE-certified R22.06 JD/ONE helmet so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.
John Doe

John Doe Helmet cheek pad

6 variants

Stock:Yes

With stainless steel screws. Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in anodized colors so you can fine-tune the look of your helmet. NOTE! Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN. Each kit includes two screws and two washers.
Biltwell

Biltwell Helmet Gen2 Hardware Kit red

#913353

Stock:Yes

Restore that fresh out of the box feeling with a new liner and cheek pads. One interior comfort liner and two cheek pads are included with each kit, and installation is easy using button snaps.
Biltwell

Biltwell Lane Splitter helmet liner set + pads

6 variants

Stock:Yes

Restore that fresh out of the box feeling with a new liner. Easily installs with a tabbed hook and look securing system. Contrast diamond stitch detailing. Easily installs with a tabbed hook and loop securing system.
Biltwell

Biltwell helmet liner for Gringo S & Gringo

4 variants

Stock:Yes

Biltwell offers removable cheek pads for your ECE-certified R22.06 Gringo, Gringo S, and Gringo SV helmets so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.
Biltwell

Biltwell Gringo / S / SV 22.06 cheek pad set - 5mm

7 variants

Stock:Yes