Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 4931 search results

Sort on:

Sort on:

Upgrade your Indian Motorcycle’s style and comfort with our Super Fat 2" Handlebars — designed for models with 1" risers and compatible with Throttle-by-Wire systems.

Killer Custom, Killer Bull 2 Fat Handlebars 8". Black

#708963

Stock:No

Upgrade your Indian Motorcycle’s style and comfort with our Super Fat 2" Handlebars — designed for models with 1" risers and compatible with Throttle-by-Wire systems.

Killer Custom, Killer Bull 2 Fat Handlebars 10". Black

#708964

Stock:No

Upgrade your Indian Motorcycle’s style and comfort with our Super Fat 2" Handlebars — designed for models with 1" risers and compatible with Throttle-by-Wire systems.

Killer Custom, Killer Bull 2 Fat Handlebars 12". Black

#708965

Stock:No

Upgrade your Indian Motorcycle’s style and comfort with our Super Fat 2" Handlebars — designed for models with 1" risers and compatible with Throttle-by-Wire systems.

Killer Custom, Killer Bull 2 Fat Handlebars 6". Black

#708962

Stock:No

Raw machined finish without coating.
With special machined extensions used with Kraus Veloci and Raptor pullback plates only.
Used to marginally extend Kraus' Isolated, Workman and Dagger risers. Perfect to precision-adjust your handlebar to your riding position, instead of the other way around. CNC machined billet aluminum with correct installation hardware for a seamless fit.
Note: Will not fit Kraus T-Rex and Dagger pullback plates

Kraus, 1 inch (25.4mm) riser extension kit. Machined Finish

#708980

Stock:Yes

Upgrade your Indian Motorcycle’s style and comfort with our Super Fat 2" Handlebars — designed for models with 1" risers and compatible with Throttle-by-Wire systems.

Killer Custom, Killer Bull 2 Fat Handlebars 4". Black

#708961

Stock:No

Black anodized.
Regular extensions that used with stock triple trees and Kraus T-Rex and Dagger pullback plates.
Used to marginally extend Kraus' Isolated, Workman and Dagger risers. Perfect to precision-adjust your handlebar to your riding position, instead of the other way around. CNC machined billet aluminum with correct installation hardware for a seamless fit.
Note: Will not fit Kraus Veloci and Raptor pullback plates

Kraus, 1 inch (25.4mm) riser extension kit. Black

#708977

Stock:Yes

The KR Low Bar brings your hands into the optimal position for superior control. The closer your hands are aligned with the center of the front end’s rotation, the more responsive your bike becomes.

These handlebars are built for performance, with a refined black powder coat finish. Built to withstand the rigors of hard riding, with easy fitment and laser markings for perfect alignment during setup.
Width: 29 inches | Pullback: 2.5 inches | Center-to-Center Height: 3.25 inches

Kraus, KR Low Bar Handlebar 1". Black

#719170

Stock:No

Performance Machine, Contour Renthal wrapped grips. Black

#718509

Stock:No

Performance Machine, Contour Renthal wrapped grips. Chrome

#718510

Stock:No

Burly, Hawk Billet grip set. Black CC stripes/dots

#719566

Stock:No

Burly, Reaper billet grip set. Black CC

#719574

Stock:Yes

Burly, Hawk billet grip set. Black CC

#719567

Stock:No

Burly, Hawk Billet grip set. Black CC stripes/dots

#719568

Stock:No

Burly, Hawk Billet grip set. Black Textured

#719569

Stock:No

CNC billet aluminum construction. Black Contrast Machined finish.
For handlebars with a 1" (25.4mm) clamping diameter.
With a two-piece top clamp with a 4-bolt clamping system (4 bolts for 2 risers). A slim construction and perfect for lower bars where rotational forces are not as high as found in higher handlebars.
12-13 threaded. With a low 1.5" (3.8cm) rise and designed to give ultimate strength. Complete with stainless top clamp bolts.

Burly, Reaper riser kit. 1.5" high. 4-bolt 2-piece. Black CM

#719917

Stock:No

With a massive 2" outside diameter. For models with 1-1/4" handlebar clamp diameter and 1" handlebar grip diameter.
Gives the bike an aggressive, functional and modern look. With five laser-cut holes for internal wiring to offer a clean installation. Just thread the wires inside the bar and you're ready. Complete with special for easy mounting of OEM master cylinder. half clamp Integrates seamlessly with 1-1/4" risers and e-throttle (throttle by wire) setup. With a gloss black powder-coated finish for lasting good looks.
- 2" (50mm) outside diameter
- Stock 1-1/4" (32mm) handlebar clamp diameter
- Stock 1" (25.4mm) mm grip diameter
- E-throttle compatible
- Heated grips compatible
- For hydraulic operated clutch
- 5 laser cut wiring holes
- Complete with half clamp for master cylinder
- Gloss black powder coated steel.
Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Killer Custom, Killer Bull 2" fat bar. FLTR/FLHR. 16" rise

#704847

Stock:No

Raw machined aluminum finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 10" rise. Raw

#708344

Stock:Yes

Raw machined aluminum finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Straight Risers. 8" rise. Raw

#708356

Stock:Yes

Black anodized finish.
With 1" (25.4mm) diameter handlebar clamp area.
Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider.
These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away.
- Far less vibration than rigid mounted risers and a much better bar feel.
- Bottom clamp has an opening to accommodate hidden wiring
- Top clamp ((top Plate) must be purchased separately depending on your application
- 3.5" center to center for standard OEM H-D fitment
- Bushing life is increased, maintenance lowered
- Wiring slot in the center of the riser body allows for easy installation and clean wiring.
Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application.
Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp.
Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.

Kraus, Topless Isolated Kickback Risers. 5" rise. Black

#708347

Stock:Yes