Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 417 search results

Sort on:

Sort on:

Small windshield / fairing / fairing mask, made of black anodized aluminum. Non-transparent. Universal above headlamp mount. Helps reduce wind pressure and an improves the riding experience, especially on high speed sections. Does not include mounting brackets.
Dimensions: 218mm wide x 220mm high with pre-drilled mounting holes. See technical drawing for more dimensions.

Daytona, aluminium meter visor. Black

#709136

Stock:Yes

The Shark Demon™ 2 is a side mount headlamp for 12 VDC systems, similar sized to 5-3/4 headlamps. It includes installation hardware, without a bracket. The included universal 3-wire harness connects to vehicle high beam, low beam, and ground. Offers high-performance illumination with reliability and the improved vibration resistance typical for LED.
- Designed for on-road use
- 12V DC
- High performance illumination
- No more burned-out bulbs
- Contemporary design
- Gloss black aluminum housing
- Polycarbonate clear lens
- 5800-6500K color temperature
- Low beam: 3600 raw lumen, 2651 effective lumen (3 projection LEDS)
- High beam: 9080 Raw lumen, 4485 effective lumen (4 direct reflective LEDS)
- Low beam stays on with high beam
- Incl. universal wiring harness
- Waterproof IP67

Custom Dynamics, 5-3/4" Shark Demon LED headlamp kit

#709274

Stock:Yes

White headlamp / Yellow fog dual headlamp upgrade kit.
This white/yellow combo kit includes a bright white, DOT compliant LED headlamp with a low beam of three projection-style LEDs and a high beam which adds four additional direct-reflective LEDs boasting an impressive 9080 raw/3216 effective lumens.
An SAE compliant, selective yellow fog lamp provides an additional 8050 raw/2050 effective lumens and riding clarity like you’ve never experienced before. Lamp assemblies are completely sealed IP67, waterproof with polycarbonate lens and gloss black aluminum housing.
Shark Demon LED headlamps offer high-performance illumination, specialized for motorcycle on road use with unmatched beam pattern and durability.
Complete with non-illuminated vents.
Note: Requires removal of OEM turn signals.
Note: See the optional LED lighted turn signal vent inserts 719368 (amber turn & white run) or 719369 (selective yellow turn signal with selective yellow lens) for further upgrading your Road Glide. Note that these lighted vent inserts replace the stock non-illuminated vent inserts, they are compatible with the 720025 white / white headlamp kit and 720026 white headlamp / yellow fog lamp Custom Dynamics V2 Shark Demon headlamp kits only.
Note: See 719370 for the optional Plug & Play Custom Dynamics load equalizer. Designed for used in combination with 720025 and 720026 V2 Shark Demon dual headlamp kits, which require the removal of the OEM turn signals. Prevents trouble codes.

Custom Dynamics, Shark Demon LED headlamp kit. White/yellow

#720026

Stock:No

Installing a LED headlamp on a bike that was equipped with a regular H4 light bulb may trigger fault codes / trouble codes, on motorcycles with CAN-bus wiring system.
This Bright CAN-bus headlamp adapter will prevent any error codes due to LED headlamp installment.
Will also correct problems like flickering and other incompatibility between lights and the bike.
Works with all H4 style 3-prong connectors.

NOTE: Not available for sale in Germany

Bright, CAN-bus headlamp adapter

#998322

Stock:Yes

White / White dual headlamp upgrade kit.
ECE, DOT & SAE approved. A White/White dual headlamp kit with low beam projecting 11,314 raw/5554 effective lumens from six projection-style LEDs. High beam adds eight additional direct-reflective LEDs boasting an impressive 22,274 raw/8634 effective lumens total. Side facing position lights further increase viewing angle and width of beam pattern for ditch-to-ditch illumination. Lamp assemblies are completely sealed IP67, waterproof with clear polycarbonate lens and gloss black aluminum housing.
Shark Demon LED headlamps offer high-performance illumination, specialized for motorcycle on road use with unmatched beam pattern and durability.
Complete with non-illuminated vents.
Note: Requires removal of OEM turn signals.
Note: See the optional LED lighted turn signal vent inserts 719368 (amber turn & white run) or 719369 (selective yellow turn signal with selective yellow lens) for further upgrading your Road Glide. Note that these lighted vent inserts replace the stock non-illuminated vent inserts, they are compatible with the 720025 white / white headlamp kit and 720026 white headlamp / yellow fog lamp Custom Dynamics V2 Shark Demon headlamp kits only.
Note: See 719370 for the optional Plug & Play Custom Dynamics load equalizer. Designed for used in combination with 720025 and 720026 V2 Shark Demon dual headlamp kits, which require the removal of the OEM turn signals. Prevents trouble codes.

Custom Dynamics, Shark Demon LED headlamp kit. White/white

#720025

Stock:Yes

ECE & DOT approved.
Black bezel.
With a switchable white/amber (orange) colored halo-ring/position light.
Economical high/low beam LED conversion head lamp unit to replace the stock H4 unit.
LEDs are an improvement at all levels when compared to H4 lighting and offer more effective and whiter light at 6000K, much better reliability and less amperage draw.
- White / amber switchable halo-ring/position light
- Unit comes complete with wiring with a 3-prong plug that is identical to a standard H4 light bulb, allowing a plug & play conversion
- Compatible with left side (UK) & right side (EU) riding
- 143.8mm (5.66") diameter
- 88.7mm (3.49") deep
- 6500K color temperature
- Theoretical power at high beam 66W
- 12-Volt DC
- Passing beam 21W
- Driving beam 31W
- Halo ring/position light 60 LEDs 5.2W
- Approval E24*50R01/00*0463*00

NOTE: Not available for sale in Germany.

Bright, 5.3/4" LED headlamp unit. Black

#955824

Stock:Yes

Old style side mounted headlamp with a strong reference to the 50's and 60's style headlamp designs, where the speedo was incorporated in the headlamp shell. This Vintage headlamp comes with 60mm speedo mounting hole in the rear section of the headlamp housing.
- Chrome housing with chrome trim ring
- With 55/60W H-4 bulb
- ECE approved lens
- 60mm speedometer hole.
Note: Designed for use with 60mm diameter Velona speedo or tachometers series. See our speedo chapter.
Note: For an optional style matching fork tube mounted headlamp bracket see 510134 black steel (for 39mm tubes), 510133 polished stainless steel or 510136 black steel (for 41mm fork tubes).

Daytona, Vintage 5-3/4" headlamp. Chrome

#900937

Stock:Yes

Black painted steel. Compatible with 900937 (chrome) and 900938 (black with chrome trim ring) Vintage headlamps.

Bracket for 'vintage' headlamp. 39mm fork tubes. Black

#510134

Stock:Yes

Polished stainless steel. Compatible with 900937 (chrome) and 900938 (black with chrome trim ring) Vintage headlamps.

Bracket for 'vintage' headlamp. 41mm fork tubes. Polished ss

#510133

Stock:Yes

Black painted steel. Compatible with 900937 (chrome) and 900938 (black with chrome trim ring) Vintage headlamps.

Bracket for 'vintage' headlamp. 41mm fork tubes. Black

#510136

Stock:Yes

For 41mm diameter fork tubes.
Black anodized CNC machined aluminium construction.
These brackets have two clamps that can slide up and down the fork tube.
By sliding both you can move your headlamp up and down, by sliding only one you can position the headlamp further in or out.
Complete with turn signal mount kit for M8 threaded turn signals.

Daytona, Dual Axis adjustable headlamp bracket. 41mm

#968851

Stock:Yes

For 35mm diameter fork tubes.
Black anodized CNC machined aluminium construction.
These brackets have two clamps that can slide up and down the fork tube.
By sliding both you can move your headlamp up and down, by sliding only one you can position the headlamp further in or out.
Complete with turn signal mount kit for M8 threaded turn signals.

Daytona, Dual Axis adjustable headlamp bracket. 35mm

#968849

Stock:Yes

Black powder coated steel.
Lowering bracket is installed between upper triple tree and headlamp fairing, drops headlamp 45mm.
Looks fast, even when parked!
Plug & play 4-bolt installation, without any modifications.

Cult-Werk, headlamp 45mm lowering kit. Black

#963039

Stock:Yes

- Raw cast aluminum with semi-polished ribs.
- Ribbed cast aluminum in a retro design to surpass any regular old-time look.
Note: 5-3/4" headlamp unit, trim ring and custom bottom mount block must be re-used or purchased separately.
Note: Not compatible with LED units.

EMD, Vitamin A 5-3/4" headlamp housing. Semi-polished

#964876

Stock:Yes

Unpainted gloss black finish. ABE approved. Manufactured from ABS that is produced on 5-axis CNC machines for perfect precision and hassle-free fitment. Installs to the OEM mounting points.
Compatible with the early 15-24 style Sharknose fairing.

Cult-Werk, FLTR headlamp trim 'Bad Look'. Gloss black

#575577

Stock:Yes

Headlamp mask for XJRs with an attitude. Manufactured from black unpainted ABS plastic. Easy to trim or drill and can be painted in any desired color scheme. Requires a custom installation. Sold without brackets or hardware.

C-Racer headlight mask black

#578665

Stock:Yes

Universal headlamp fairing. Manufactured from black unpainted ABS plastic. Can be used with 160mm to 180mm diameter headlamps. Easy to trim or drill and can be painted in any desired color scheme. Requires a custom installation. Sold without brackets or hardware.

C-Racer universal Cafe Racer front mask No12

#578699

Stock:Yes

Diopter style. Universal black powder coated steel headlamp grill with dual bottom mount. Made to offer headlamp lens protection, but also offers awesome custom looks. Compatible with 7" (17.8cm) to 8" (20.3cm) headlamps. Comes with clear, smoke and yellow plexiglass lenses to fit your style.
Note: Installation modifications may be required.

C-Racer universal headlight grill & lens kit No1

#578717

Stock:Yes

Sight style. Universal black powder coated steel headlamp grill. Made to offer headlamp lens protection, but also offers that tough 'ready for anything' look. Compatible with 7" (17.8cm) to 8" (20.3cm) headlamps. Compatible with most side mount headlamps.
Note: Installation modifications may be required.

C-Racer universal headlight grill No3 Sight

#578722

Stock:Yes

Open style. Universal black powder coated steel headlamp grill with side mount. Made to offer headlamp lens protection, but also offers awesome custom looks. Compatible with 7" (17.8cm) to 8" (20.3cm) headlamps. Comes with clear, smoke and yellow plexiglass lenses to fit your style.
Note: Installation modifications may be required.

C-Racer universal headlight grill & lens kit No3

#578719

Stock:Yes