BIKE SELECTOR

20 of 453 search results

Sort on:

2-way pin. 2-way. Complete with terminals and wire seals. OEM replacement reference 69201397
Namz
New

NAMZ, connector engine temperature sensor

#710070

Stock:Yes

Kawasaki Type 040-HX Series
MCS

Connector set for turn signal - 2 pole

#970864

Stock:Yes

Honda-B White
MCS

Connector set for turn signal - 3 pole

#970858

Stock:Yes

Easily install any Kuryakyn by Kellermann or other custom L.E.D. turn signals with the Rear Signal Splitter Module to accommodate any custom turn signal application. 3-wire: run power, brake & turn power, and ground. Allows replacement of stock amber turn signals with red custom turn signals for additional run and brake & turn lighting to the rear of the bike.
Kuryakyn

Kuryakyn, Signal splitter module 3 wire

#576990

Stock:Yes

Used when installing aftermarket turn signals.
Koso

KOSO, turn signal wire adapter. Kawasaki

#942313

Stock:Yes

Used when installing aftermarket turn signals.
Koso

KOSO, turn signal wire adapter. Honda

#942314

Stock:Yes

Used when installing aftermarket turn signals.
Koso

KOSO, turn signal wire adapter. BMW

#942315

Stock:Yes

Kawasaki Black
MCS

Connector set for turn signal - 2 pole

#970862

Stock:Yes

Used when installing aftermarket turn signals.
Koso

KOSO, turn signal wire adapter set. Yamaha MT-07

#942316

Stock:No

Easily install any Kuryakyn by Kellermann or other custom L.E.D. turn signals with the Rear Signal Splitter Module to accommodate any custom turn signal application. 4 wire: run power, brake power, turn power and ground. Allows removal of stock amber turn signals to replace with custom turn signals that provide additional red run, red brake as well as amber (or red) turn lighting to the rear of the bike.
Kuryakyn

Kuryakyn, Signal splitter module 4 wire

#576991

Stock:Yes

Honda-B Light Blue
MCS

Connector set for turn signal - 2 pole

#970856

Stock:Yes

Female speaker terminals. OEM style replacement for 72290-94
Namz

NAMZ, AMP .25" speaker terminals. Black

#548407

Stock:Yes

Includes terminal pins and wire seals. Connects TPS (Throttle Position Sensor) and oil pressure sensor. OEM replacement reference 72065-06A. Note: See 548312 for the matching female receptacle with terminal pins.
Namz

NAMZ, Delphi TPS connector. Male receptacle. 3-pin

#548312

Stock:Yes

Female speaker terminals. OEM style replacement for 72294-94.
Namz

NAMZ, AMP .187" white speakers terminals . White

#548408

Stock:Yes

Required on H-D models that are equipped with factory alarm or security module, when converting to LED turn signals. Alarm friendly. Used to draw the same load as incandescent bulbs so your turn signals will not flash too fast, or sometimes refuse to flash at all, when converting to LED turn signals. The Custom Dynamics 'Signal Stabilizer' is not a regular resistor load equalizer, which draws current and develops heat, but uses a 'coil technology' to get the same result without drawing additional current. 100% waterproof, plug & play. Dimensions 4.2" (10.7cm) x 0.6" (1.5cm) x 1.4" (3.5cm).
Custom Dynamics

Custom Dynamics 8-pin alarm friendly heatless load equalizer

#536924

Stock:Yes

The Deutsch DT Header system consist of a Header male and a female side connector, that are sold separately. Perfect for adding audio or lighting to saddlebags, Tour-Paks, fairings or any other flat surface. Cut a hole for the connector, drill two holes for mounting, ready. Complete with terminal pins and the built-in gasket ensures a waterproof seal. Note: The 548162 mating 6-pin female plug is not included and must be ordered separately.
Namz

NAMZ, Deutsch DT header series. 8-pin

#548421

Stock:Yes

AMP Mate-n-Lock watertight and interlocking connectors. Used on motorcycles by OEM manufacturers since the mid 80's and still to be found on many bikes today. All connectors are whte and include watertight seals. The required pins must be purchased separately. A good starting point for the professional or enthousiastic builder. This kit offers no-search access and easy re-ordering. Kit contains 2 & 12-pin connectors (6 of each), 9 & 6-pin connectors (8 of each) and 3 & 4-pin connectors (4 of each). Also included are 100 male (100) and female (100) crimp terminals / pins.
Namz

NAMZ, AMP connectors builder shop kit

#548188

Stock:No

Black connector housings. Includes 8 of each 2, 3, 4, 6 & 8-pin plug & receptacle connector housings. Also included are the required stamped crimp terminal pins, 100 female plug pins and 100 male receptacle pins. This are the OEM H-D style 2nd. series terminals that were in use mostly between 1996 and 2000.
Namz

NAMZ, AMP Multilock Builders/Shop kit. Black

#548189

Stock:Yes

Deutsch DT series housing for male pins. Includes receptacle pin lock. Deutsch connectors are the very reliable, corrosion resistant, watertight and professional electrical connectors that you can assemble and disassemble right at home. No special tools required! Used by many motorcycle manufacturers, including Harley-Davidson® since 1994. Combine part numbers to make your own perfect electrical connection. Note: receptacle male pins, 548166 for 'stamped pins' or 548167 for 'solid pins' must be ordered separately. Solids are considered the best available. Note: See 548158 for compatible gray colored 4-pins housing for female pins. Note: See 578346 'plug-off' pin, used to plug-off unused pin holes.
Namz

NAMZ, Deutsch connectors. Gray, receptacle, 4-pins

#548146

Stock:Yes

Ring terminal stud diameter: #6 (3.5mm). Self soldering universal connection with heat shrink tubing. Just heat it up & it's ready. No crimping required. Strong, durable, vibration resistant and absolutely weather proof. Red is for 22-18 gauge (0.50 to 1mm² or 0.64 to 1.02mm diameter) wiring.
Standard

Standard Co, Ring terminal connectors #6. Red

#951660

Stock:Yes