Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 91 search results

Sort on:

Sort on:

Used to install motorcycle lights as turn signals, tail/brake lights and position lights. Offers an electronic universal installation solution. Compatible with all motorcycles, from classics to bikes equipped with the latest operating systems.
- Electronic universal solution for motorcycle lights such as indicators, tail/brake light and position light
- Compatible with classic bikes, new models and modern operating systems
- Correct flashing frequency
- No error messages in the cockpit
- No disruptive quiescent currents
- Installation of indicators with higher power consumption [watts] than original
- Installation of indicators with lower power consumption [watts] than original
- Installation of indicators with higher voltage [Volt] than original
- Installation on motorcycles with minus-switched indicators
- Installation on motorcycles with current-controlled indicators

Kellerman, i.Nex Equalizer.8V

#997706

Stock:Yes

This heavy-duty silicone rubber seal is designed to replace the factory-installed seal on Harley-Davidson TSM (Turn Signal Module) and TSSM (Turn Signal Security Module) wire harness plug. When replacing the TSM, Custom Dynamics strongly recommends replacing the original seal to maintain a secure, watertight connection and protect the unit from moisture-related damage.
Used on both OEM and Custom Dynamics 709103, 709104, 709105 and 709106 TSM (turn signal modules)

Custom Dynamics, Replacement Seal for TSM/TSSM Connector

#709107

Stock:Yes

This will replace OEM TSM (Turn Signal Module) 68921-01, TSSM (Turn Signal Security Module) 68923-00 (for US models) and TSSM 68925-00 (for HDI/EU models) It will not replace the TSSM factory alarm features.
Note: This will replace OEM TSSM 68923-00 and TSSM 68925-00. Models It requires the use of a TechnoResearch diagnostic tool to complete the TSSM module replacement procedure. For some models a manual procedure to marry the module to the bike is possible, for all others the TechnoResearch diagnostic tool is required for TSSM module replacement. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, Smart turn signal module TSM-2

#709104

Stock:Yes

This will replace OEM TSM (Turn Signal Module) 68921-07, HFSM (Hands Free Security Module) 68925-07 (for US & HDI/EU models) and HFSM 69976-08.
Integration with the OEM safety switches prevent starting in gear without the clutch pulled. It will not replace the HFSM factory alarm features. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, Smart turn signal module TSM3

#709105

Stock:Yes

This will replace OEM TSM (Turn Signal Module) 68920-01, TSSM (Turn Signal Security Module) 68922-00 (for US models) or TSSM 68924-00 (for HDI/EU models). It will not replace the TSSM factory alarm features.
Note: The replacement of the OEM TSSM factory alarm module 68922-00 & TSSM 68924-00 for models with EFI require the use of a TechnoResearch diagnostic tool to complete the TSSM module replacement procedure. For some models a manual procedure to marry the module to the bike is possible, for all others the TechnoResearch diagnostic tool is required for TSSM module replacement. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, turn signal module TSM-1

#709103

Stock:Yes

This will replace OEM TSM (Turn Signal Module) 68920-07 and HFSM (Hands Free Security Module) 68924-07 (for US & HDI/EU models).
Integration with the OEM safety switches prevent starting in gear without the clutch pulled. It will not replace the HFSM factory alarm features. Installation instructions are included.
- Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules
- Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module)
- Lighting Compatibility: Works with both LED and incandescent bulbs
- Turn Signal Load Range: Supports 0.24A to 6A per side
- No Load Equalizer Required: Compatible with BCM-compliant LED upgrades
- Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure
- Turn Signal Functions: Manual and self-canceling based on speed, time, and direction
- Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage
- Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second
- Protection: Built-in short circuit and overcurrent protection on turn signal circuits
- Power Efficiency: Designed for low current consumption
- Voltage Range: Operates between 11VDC and 15VDC
- Build Quality: Robust, high-quality components
- Includes installation instructions.
Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Custom Dynamics, Smart turn signal module TSM-4

#709106

Stock:Yes

Plug & Play. Designed to plug into the main wiring harness and offer power-taps. The Posi-Tap connectors allow an easy to hook-up to auxiliary lighting or accessories to run, brake, L&R turn signals and ground wiring.

Custom Dynamics, power tap wiring adapter. 8 pin adapter

#536462

Stock:Yes

Used to transform your rear turn signals into running, brake & turn signals.
Choice of 10 user selectable built in brake light strobe/flash patterns (user can also select no strobe/flash on brake).
Additional functions include selectable running light intensities to match the running light brightness of turn signals to center taillight.
Ability to apply brake strobe/flash patterns to center taillight only, rear turns only, or rear turns and center taillight.
Built in SMART function which allows normal turn signal flash to override the brake strobe/flash when simultaneously braking and turning.
Works with LED or regular incandescent light bulbs.
Alarm friendly for 01-up models.
Note: Requires an alarm friendly heatless load equalizer.

Custom Dynamics Smart Triple Play unit

#536545

Stock:Yes

Easily install any Kellermann or other custom LED turn signals with the rear signal splitter module. Module is plug-and-play into stock wiring harness. Allows stock taillight and turn signals to remain in place with stock functionality or be removed for custom applications. 3-Wire: run power, brake/turn power and ground. Left and right outputs provide run and brake/turn functionality. 3-Wire module can be used as a completely plug-and-play upgrade to Kuryakyn rear Fender Strip Lights (part number 576995) to convert them from Run-Brake to Run-turn-Brake

Kuryakyn, Rear signal splitter module 3-wire

#906391

Stock:Yes

Easily install any Kellermann or other custom LED turn signals with the rear signal splitter module. Module is plug-and-play into stock wiring harness. Allows stock taillight and turn signals to remain in place with stock functionality or be removed for custom applications. 4 Wire: run power, brake power, turn power and ground). Left and right outputs provide run, brake and turn functionality.

Kuryakyn, Rear signal splitter module 4-wire

#906392

Stock:Yes

Plug & Play. Converts regular rear 1156 single intensity turn signals (models with a center taillight) to function as run, brake, and turn. With built-in 'heatless' load equalizer, works with LEDs or incandescent bulbs. Choice from 10 user selectable built in brake light strobe/flash Patterns (user can also select no strobe/flash on brake). Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns & center taillight. The 'SMART Function': If brake strobe/flash is turned on, strobe/flashing will be paused on turn signal if simultaneous braking and turning. Includes 10 user selectable running light intensities to match intensity of the center taillight. Built in short circuit protected. Sealed in a weather tight case. Slim line design Dimnesion: 4.2" (10.7cm) x 1.4" (3.6cm) x 0.6" (1.5cm).

Custom Dynamics, 'Smart Triple Play' unit. Sportster

#922686

Stock:Yes

Plug & Play. With built-in 'heatless' load equalizer. Converts rear 1156 turn signals (models with a center taillight) to function as run, brake, and turn with choice of 10 user selectable built in brake light strobe/flash patterns! Additional functions include selectable running light intensities to match the running light brightness of turn signals to center taillight, ability to apply brake strobe/flash patterns to center taillight only, rear turns only, or rear turns and center taillight, and built in SMART function which allows normal turn signal flash to override the brake strobe/flash when simultaneously braking and turning.

Custom Dynamics, 'Load balancing Smart Triple Play' unit. XL

#922690

Stock:Yes

Used to easily add additional accessory ports.
Plugs into to your 'Smart-Triple Play' unit.
Allows a total of 3 Plug & Play lighting units to be installed, like Custom Dynamics as Fillerz® and Saddlebag Lights.

Custom Dynamics, 'Smart Triple Play' extension harness

#922691

Stock:Yes

Allows 2 to 5 separate LED turn signal segments per side to flash sequential, instead of flashing all at the same time. Sequential flash speed is programmable via dip switches. Equipped with running light output control wire to shut off the running light output when the turn signal sequence is activated for best visibility. 1 module needed per bike. Includes left & right side plug and play quick connectors. Comes in a weather tight hard case and has 36" (91cm) long wires.
- Adds sequential turn signal flash
- 2-5 outputs per side
- Dual outputs
- Running light output control during flashing
- 36" wires (91cm)
- Built-in quick connectors
- 9-16 V operating current
- Reverse battery protection
- 0.25Amp per output

Custom Dynamics, sequential turn signal control module

#941782

Stock:Yes

- Gives running light and brakelight function to rear turn signals
- Maintains turn signal function
- Load equalizer is built-in allowing the module to work with stock or any custom turn signals
- Plug 'n Play installation
Note: Module will work with CAN-bus controlled bikes only.

Badlands, Illuminator Plug 'n Play

#588885

Stock:Yes

Used to transform your rear turn signals into running, brake & turn signals.
Choice of 10 user selectable built in brake light strobe/flash patterns (user can also select no strobe/flash on brake).
Additional functions include selectable running light intensities to match the running light brightness of turn signals to center taillight.
Ability to apply brake strobe/flash patterns to center taillight only, rear turns only, or rear turns and center taillight.
Built in SMART function which allows normal turn signal flash to override the brake strobe/flash when simultaneously braking and turning.
Works with LED or regular incandescent light bulbs.
Alarm friendly for 01-up models.
Note: Requires an alarm friendly heatless load equalizer.

Custom Dynamics Smart Triple Play unit

#536489

Stock:Yes

Without a load equalizer, not for use with LED turn signals. Used for adding turn signals to the saddlebags. Features detachable pigtails for turn signals. Plug & Play.

Namz, Hot Box saddlebag turn signal module & harness

#578321

Stock:Yes

Plug & play installation.
For models with center rear taillight.
Converts rear (1156 bulb) turn signals to run-brake-turn function.
With built-in 'heatless' load equalizer, works with LEDs or incandescent bulbs.
Choice from 10 user selectable built in brake light strobe/flash Patterns (user can also select no strobe/flash on brake).
Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns & center taillight.
The 'SMART Function': If brake strobe/flash is turned on, strobe/flashing will be paused on turn signal if simultaneous braking and turning.
Includes 10 user selectable running light intensities to match intensity of the center taillight. Built in short circuit protected. Sealed in a weather tight case.
Slim line design Dimension: 4.2" (10.7cm) x 1.4" (3.6cm) x 0.6" (1.5cm).
Note: Rear turn signals must be converted to red color for DOT compliance. Note that red is not EU compliant.

Custom Dynamics, 'Smart Triple Play' unit. M8 Softail

#922687

Stock:Yes

Installing LED turn signals, with a lower amperage draw, may affect the TSSM factory alarm module.This load equalizer is used to prevent compatibility issues.

Cycle Visions, load equalizer for TSSM

#968144

Stock:Yes

Installing LED turn signals, with a lower amperage draw, may affect the stock turn signal module (TSM) module. This load equalizer is used to prevent compatibility issues.

Cycle Visions, load equalizer for TSM

#968145

Stock:Yes