BIKE SELECTOR

20 of 252 search results

Sort on:

Small windshield / fairing / fairing mask, made of black anodized aluminum. Non-transparent. Universal above headlamp mount. Helps reduce wind pressure and an improves the riding experience, especially on high speed sections. Does not include mounting brackets. Dimensions: 218mm wide x 220mm high with pre-drilled mounting holes. See technical drawing for more dimensions.
Daytona
New

Daytona, aluminium meter visor. Black

#709136

Stock:Yes

- Hexagon Teardrop style - Black - Used to clamp to the end of the handlebar - Aluminum 119mm wide x 85mm high mirror head - Aluminum 88mm long stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved
Daytona
New

Daytona, bar end D-mirror. Number 23, short stem

#709120

Stock:Yes

Small custom elongated LED lighted turn signals. Black aluminum with vibration damping stud. ECE approved for front & rear use. Perfect for a visible but non-intrusive turn signal set. - Sold in pairs - Aluminum housing - Clear lens - Modern LED technology - Vibration damping integrated - E-marked for front and rear - Compatible with 12V DC - Stud M81.25 x 23.5mm long - Housing dimensions: 77.6mm wide x 23mm high x 15.7mm deep
Daytona
New

Daytona, 'D-Light Classic' turn signal set. Black

#709123

Stock:Yes

127mm (5") long. With the 'KNIT' grip surface styling. Handlebar grips for handlebars with a 1" (25.4mm) grip area diameter. The throttle grip diameter is larger to accommodate the throttle sleeve. Both left & right grips come with closed ends. Grips are made of a dual compound rubber, harder on the inside with a softer 'Grippy' outer layer for a better slip-free grip, without becoming tacky. Note: 08-up H-D models with electronic throttle will likely require a replacement throttle sleeve, like 514714 for most models, since the OEM rubber grip is a molded one-piece with the throttle sleeve and they cannot be separated.
Daytona
New

Daytona, 1" Grippy Grip set. KNIT. Dark red

#709135

Stock:Yes

127mm (5") long. With the 'GRID' grip surface styling. Handlebar grips for handlebars with a 1" (25.4mm) grip area diameter. The throttle grip diameter is larger to accommodate the throttle sleeve. Both left & right grips come with closed ends. Grips are made of a dual compound rubber, harder on the inside with a softer 'Grippy' outer layer for a better slip-free grip, without becoming tacky. Note: 08-up H-D models with electronic throttle will likely require a replacement throttle sleeve, like 514714 for most models, since the OEM rubber grip is a molded one-piece with the throttle sleeve and they cannot be separated.
Daytona
New

Daytona, 1" Grippy Grip set. GRID. Brown

#709131

Stock:Yes

127mm (5") long. With the 'KNIT' grip surface styling. Handlebar grips for handlebars with a 1" (25.4mm) grip area diameter. The throttle grip diameter is larger to accommodate the throttle sleeve. Both left & right grips come with closed ends. Grips are made of a dual compound rubber, harder on the inside with a softer 'Grippy' outer layer for a better slip-free grip, without becoming tacky. Note: 08-up H-D models with electronic throttle will likely require a replacement throttle sleeve, like 514714 for most models, since the OEM rubber grip is a molded one-piece with the throttle sleeve and they cannot be separated.
Daytona
New

Daytona, 1" Grippy Grip set. KNIT. Brown

#709134

Stock:Yes

125mm long. With the 'KAWA' grip surface styling. Handlebar grips for handlebars with a 1" (25.4mm) grip area diameter. The throttle grip diameter is larger to accommodate the throttle sleeve. Both left & right grips come with closed ends. Grips are made of a dual compound rubber, harder on the inside with a softer 'Grippy' outer layer for a better slip-free grip, without becoming tacky. Note: 08-up H-D models with electronic throttle will likely require a replacement throttle sleeve, like 514714 for most models, since the OEM rubber grip is a molded one-piece with the throttle sleeve and they cannot be separated.
Daytona
New

Daytona, 1" Grippy Grip set. KAWA. Black

#709128

Stock:Yes

127mm (5") long. With the 'GRID' grip surface styling. Handlebar grips for handlebars with a 1" (25.4mm) grip area diameter. The throttle grip diameter is larger to accommodate the throttle sleeve. Both left & right grips come with closed ends. Grips are made of a dual compound rubber, harder on the inside with a softer 'Grippy' outer layer for a better slip-free grip, without becoming tacky. Note: 08-up H-D models with electronic throttle will likely require a replacement throttle sleeve, like 514714 for most models, since the OEM rubber grip is a molded one-piece with the throttle sleeve and they cannot be separated.
Daytona
New

Daytona, 1" Grippy Grip set. GRID. Dark red

#709132

Stock:Yes

125mm long. With the 'KAWA' grip surface styling. Handlebar grips for handlebars with a 1" (25.4mm) grip area diameter. The throttle grip diameter is larger to accommodate the throttle sleeve. Both left & right grips come with closed ends. Grips are made of a dual compound rubber, harder on the inside with a softer 'Grippy' outer layer for a better slip-free grip, without becoming tacky. Note: 08-up H-D models with electronic throttle will likely require a replacement throttle sleeve, like 514714 for most models, since the OEM rubber grip is a molded one-piece with the throttle sleeve and they cannot be separated.
Daytona
New

Daytona, 1" Grippy Grip set. KAWA. Brown

#709129

Stock:Yes

127mm (5") long. With the 'GRID' grip surface styling. Handlebar grips for handlebars with a 1" (25.4mm) grip area diameter. The throttle grip diameter is larger to accommodate the throttle sleeve. Both left & right grips come with closed ends. Grips are made of a dual compound rubber, harder on the inside with a softer 'Grippy' outer layer for a better slip-free grip, without becoming tacky. Note: 08-up H-D models with electronic throttle will likely require a replacement throttle sleeve, like 514714 for most models, since the OEM rubber grip is a molded one-piece with the throttle sleeve and they cannot be separated.
Daytona
New

Daytona, 1" Grippy Grip set. GRID. Black

#709130

Stock:Yes

125mm long. With the 'BASE' surface styling. Handlebar grips for handlebars with a 1" (25.4mm) grip area diameter. The throttle grip diameter is larger to accommodate the throttle sleeve. Both left & right grips come with closed ends. Grips are made of a dual compound rubber, harder on the inside with a softer 'Grippy' outer layer for a better slip-free grip, without becoming tacky. Note: 08-up H-D models with electronic throttle will likely require a replacement throttle sleeve, like 514714 for most models, since the OEM rubber grip is a molded one-piece with the throttle sleeve and they cannot be separated.
Daytona
New

Daytona, 1" Grippy Grip set. BASE. Black

#709126

Stock:Yes

125mm long. With the 'BASE' surface styling. Handlebar grips for handlebars with a 1" (25.4mm) grip area diameter. The throttle grip diameter is larger to accommodate the throttle sleeve. Both left & right grips come with closed ends. Grips are made of a dual compound rubber, harder on the inside with a softer 'Grippy' outer layer for a better slip-free grip, without becoming tacky. Note: 08-up H-D models with electronic throttle will likely require a replacement throttle sleeve, like 514714 for most models, since the OEM rubber grip is a molded one-piece with the throttle sleeve and they cannot be separated.
Daytona
New

Daytona, 1" Grippy Grip set. BASE. Brown

#709127

Stock:Yes

If you need a non-slip grip on a surface this EPDM rubber tape is what you're looking for. Perfect for grip enhancement on handlebar grips, passenger grip rails but also on tools like hammers, screwdrivers or even fishing rods. There is literally no end to the versatility of this grip tape. - Set of two EPDM grip bandages - Dimensions 25mm wide x 1050mm long x 0.5mm thick - Complete with fixing tape
Daytona
New

Daytona, EPDM rubber grip tape set. Black

#709138

Stock:Yes

127mm (5") long. With the 'KNIT' grip surface styling. Handlebar grips for handlebars with a 1" (25.4mm) grip area diameter. The throttle grip diameter is larger to accommodate the throttle sleeve. Both left & right grips come with closed ends. Grips are made of a dual compound rubber, harder on the inside with a softer 'Grippy' outer layer for a better slip-free grip, without becoming tacky. Note: 08-up H-D models with electronic throttle will likely require a replacement throttle sleeve, like 514714 for most models, since the OEM rubber grip is a molded one-piece with the throttle sleeve and they cannot be separated.
Daytona
New

Daytona, 1" Grippy Grip set. KNIT. Black

#709133

Stock:Yes

Black. LED license plate lamp made of high quality ABS plastic. - E-marked - Thread: M4 x P0.7 - Thread distance: 24mm - 12V DC - Dimensions: 14mm high x 49mm wide x 19.8mm deep
Daytona
New

Daytona, LED license plate light

#709124

Stock:No

Universal 60W power supply. Comes with 2 QC3.0 (QuickCharge) USBA-A (30W) and USB-C (30W) ports, for 1" (2.54mm) and 22mm handlebars. Complete dual power point kit with installation hardware. - 1x USB-A port - 1x USB-C port - Type-C USB PD(Power Delivery) & Type-A QC3.0 Dual Port - Housing material: Black ABS - IPX6 water resistance - Powers on with ignition key - Relay kit included - Input voltage: DC12V - Output: 5V/3A, 9V/3A, 12V/2.5A - Max. 60W (30W USB-A, 30W USB-C)
Daytona
New

Daytona, handlebar mount USB-A/C slim mount charge port kit

#709137

Stock:No

Black. Universal USB-A power supply that mounts to 1" and 22mm handlebars. Comes with 1 QC3.0 (QuickCharge) USB-A port. Complete kit with installation hardware. - Housing material: ABS - Input: DC12.5V (range: DC12-16V) - Output 5V/3A, 9V/2A, 12V/1.5A - Max. 30W - Fits 22.2mm and 25.4mm handlebars - Powers-on with ignition key - CE approved
Daytona
New

Daytona, handlebar mounted USB-A charge port kit

#709125

Stock:Yes

Mini fuse holder set with included 10 Ampere mini fuse. A reserve 10A mini fuse is included in this innovative holder. Can be used as solo fuse holder but, by using the built-in rail, multiple of these fuse holder housings can be connected to each other to form a multiple housing block. Complete with connector to install the holder housing to a mounting hole. - Housing size: 24mm wide x 30mm high x 24mm deep - Wire diameter: 1.25mm
Daytona
New

Daytona, mini fuse holder

#709139

Stock:Yes

- Teardrop style - Black - Used to clamp to the end of the handlebar - Aluminum 124mm wide x 83mm high mirror head - Aluminum 88mm long stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved
Daytona
New

Daytona, bar end D-mirror. Number 22, short stem

#709119

Stock:Yes

LED lighted with a black painted zinc alloy body. The M8 threaded mount bolt with nut allows virtually endless installation applications. ECE approved for front & rear use. Dimensions: Lens diameter 28mm x housing depth 15mm x 21mm install height x 45mm overall length.
Daytona
New

Daytona, D-light Sol2 mini turn signals. Smoke lens

#709122

Stock:Yes