Motorcycle Storehouse

Brands

Kellermann

Show all brands

Categories

5

Segment

4

Pins

1

Product type

3

Material

7

Color

5

Position

5

Approval

1

Voltage

2

Tags

2

Finish

6

20 of 159 search results

Sort on:

SORT ON:

Used to install motorcycle lights as turn signals, tail/brake lights and position lights. Offers an electronic universal installation solution. Compatible with all motorcycles, from classics to bikes equipped with the latest operating systems.
- Electronic universal solution for motorcycle lights such as indicators, tail/brake light and position light
- Compatible with classic bikes, new models and modern operating systems
- Correct flashing frequency
- No error messages in the cockpit
- No disruptive quiescent currents
- Installation of indicators with higher power consumption [watts] than original
- Installation of indicators with lower power consumption [watts] than original
- Installation of indicators with higher voltage [Volt] than original
- Installation on motorcycles with minus-switched indicators
- Installation on motorcycles with current-controlled indicators

Kellerman, i.Nex Equalizer.8V

#997706

Stock:Yes

Cold white position front light. ECE approved for front use position light.
It has a 3W input and an electrical voltage of 12V.
Comes with a black aluminum housing and sports Kellermann's high power LED technology for excellent visibility.
The Dayron offers a full area lighting with an extreme light output in either position light or running light through the use of the latest Kellermann clear lens technology with polycarbonate lenses.
Comes with a M8 adapter.
Dimensions: 59,9mm long x 63,5mm diameter, weight 228gram.

Kellermann, Dayron Innovation WL, black. No turn signal

#993574

Stock:Yes

With Cold White running light.
ECE approved for front use. 12V. Daytime running light 16.8W, position light 2.7W, turn signal 19.6W. Comes with a black aluminum housing and sports Kellermann's high power LED technology for excellent visibility. The daytime running light is automatically switched off when the turn signal is activated and comes back on when the turn signal no longer flashes. The daytime running light is also switched off, and the position light is activated, when the headlamp is turned on. The Dayron offers a full area lighting with an extreme light output in either position light, running light or turn signal through the use of the latest Kellermann clear lens technology with polycarbonate lenses. Comes with a M8 x 20 threaded mounting stud. Dimensions: 60mm long x 63.5mm diameter, weight 249 gram.

Kellermann, Dayron Innovation DLR with turn signal

#988566

Stock:Yes

Black.
Dark lens.
With an overall length of 14mm, a metal housing diameter of 10mm (1cm) and lens diameter of just 7.8mm the Spot RB is an ultra small taillight that re-defines miniature. Easy to overlook in traffic, you'd say, but the High Output power LED in combination with the special Extranz Extreme Optical Transparency technology actually gives it a colossal light output, when taking in account its tiny dimensions. High quality and ECE compliant so fully street legal. This is The One for those that like a taillight not just small but virtually invisible on a bike, until activated. With M5 x 6.5mm threads.
- ECE-approved for rear use
- EXtranz® - Extreme Optical Transparency Technology
- Kellermann HighPower LED Technology
- Longlife Protection Guard®, IC operated, 330 kHz
- High quality metal housing
- Suitable for 12 volt DC applications
- M5x0.5x6.5 threaded
- Dimensions: Length 14mm, max. diameter 10mm, lens diameter 7,8mm
- European design protection
Note: See turn signal section for style & size matching Spot turn signals and position lights.

Kellermann, Spot RB Dark LED taillight. Dark lens

#988872

Stock:Yes

Warm white position front light + indicator.
ECE approved for front use a position light + indicator.
It has a 3/15W input and an electrical voltage of 12V.
Comes with a black aluminum housing and sports Kellermann's high power LED technology for excellent visibility.
The Dayron offers a full area lighting with an extreme light output in either position light, running light or turn signal through the use of the latest Kellermann clear lens technology with polycarbonate lenses.
Comes with a M8 adapter. Dimensions: 59,9mm long x 63,5mm diameter, weight 228gram.

Kellermann, Dayron Classic PL, black. With turn signal

#993577

Stock:Yes

Cold white position front light + indicator.
ECE approved for front use a position light + indicator.
It has a 3/15W input and an electrical voltage of 12V.
Comes with a black aluminum housing and sports Kellermann's high power LED technology for excellent visibility.
The Dayron offers a full area lighting with an extreme light output in either position light, running light or turn signal through the use of the latest Kellermann clear lens technology with polycarbonate lenses.
Comes with a M8 adapter.
Dimensions: 59,9mm long x 63,5mm diameter, weight 228gram.

Kellermann, Dayron Innovation PL, black. With turn signal

#993576

Stock:Yes

Black.
Clear lens.
With an overall length of 14mm, a metal housing diameter of 10mm (1cm) and lens diameter of just 7.8mm the Spot RB is an ultra small taillight that re-defines miniature. Easy to overlook in traffic, you'd say, but the High Output power LED in combination with the special Extranz Extreme Optical Transparency technology actually gives it a colossal light output, when taking in account its tiny dimensions. High quality and ECE compliant so fully street legal. This is The One for those that like a taillight not just small but virtually invisible on a bike, until activated. With M5 x 6.5mm threads.
- ECE-approved for rear use
- EXtranz® - Extreme Optical Transparency Technology
- Kellermann HighPower LED Technology
- Longlife Protection Guard®, IC operated, 330 kHz
- High quality metal housing
- Suitable for 12 volt DC applications
- M5x0.5x6.5 threaded
- Dimensions: Length 14mm, max. diameter 10mm, lens diameter 7,8mm
- European design protection
Note: See turn signal section for style & size matching Spot turn signals and position lights.

Kellermann, Spot RB LED taillight. Clear lens

#988877

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914925 (warm white) or 988566 (cold white) Dayron DRLs.

Kellermann, wiring harness for Dayron with turn signal

#988570

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914926 (warm white) or 988567 (cold white) Dayron DRLs.

Kellermann, wiring harness for Dayron without turn signal

#988569

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914925 (warm white) or 988566 (cold white) Dayron DRLs.

Kellermann, wiring harness for Dayron with turn signal

#988568

Stock:Yes

With Cold White running light.
ECE approved for front use. 12V. Daytime running light 16.8W, position light 2.7W, turn signal 19.6W. Comes with a black aluminum housing and sports Kellermann's high power LED technology for excellent visibility. The daytime running light is automatically switched off when the turn signal is activated and comes back on when the turn signal no longer flashes. The daytime running light is also switched off, and the position light is activated, when the headlamp is turned on. The Dayron offers a full area lighting with an extreme light output in either position light or running light through the use of the latest Kellermann clear lens technology with polycarbonate lenses. Comes with a M8 x 20 threaded mounting stud. Dimensions: 60mm long x 63.5mm diameter, weight 249 gram.

Kellermann, Dayron Innovation DLR no turn signal

#988567

Stock:Yes

Dual function. Turn signal with position light / running light function with a clear lens. ECE approved for front use.
With sequential lighting turn signals (one lighting after the other, in a 'wave-like' pulsating motion). The lens is clear and the unit is equipped with 16 extremely bright high-power LED technology. The one of a kind slim and sleek design is inspired on a wing with an integrated jet-engine.
- Highest light output
- Kellermann HighPower LED Technology
- state-of-the-art "IC" chip technology
- 32 MHz real-time microprocessor control
- Silent current, advanced power saving algorithm
- High level of visibility over a wide range of angles
- Longlife Protection Guard®
- Suitable for 12 volt DC electrical system
- Flow-optimized metal housing, highest quality workmanship
- M8 x 20mm threaded
- Dimensions: 20mm high x 118mm wide (without threads)
- High quality rubber bushing, vibration absorbing installation
- Globally protected design.
Note: See 948459 for the style matching Jetstream 3-1 taillight, brake & turn signal unit, for rear use.

Kellermann, Jetstream sequential turn signal/position light

#996774

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914926 (warm white) or 988567 (cold white) Dayron DRLs.

Kellermann, wiring harness for Dayron without turn signal

#988571

Stock:Yes

2.5W, 3 LEDs. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine... they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system.
- Sensationally small, spectacularly bright
- EXtranz® - Extreme Optical Transparency Technology
- Kellermann HighPower LED Technology
- Longlife Protection Guard®, IC operated, 330 kHz
- Black quality metal housing with tinted lens
- Suitable for 12 volt DC applications
- European design protection
- Approved for front use.
Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Kellermann, 'Dash M' turn signal. Left front

#996772

Stock:Yes

2.5W, 3 LEDs. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine... they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system.
- Sensationally small, spectacularly bright
- EXtranz® - Extreme Optical Transparency Technology
- Kellermann HighPower LED Technology
- Longlife Protection Guard®, IC operated, 330 kHz
- Black quality metal housing with tinted lens
- Suitable for 12 volt DC applications
- European design protection
- Approved for front use.
Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Kellermann, 'Dash M' turn signal. Right front

#996773

Stock:Yes

Used to install motorcycle lights as turn signals, tail/brake lights and position lights. Offers an electronic universal installation solution. Compatible with all motorcycles, from classics to bikes equipped with the latest operating systems.
- Allows installation of 4 turn signals, taillight, brake light & position lights on 12V bikes
- Corrects flashing frequency
- Does not trigger error codes or warning lights
- No disturbing fluctuating currents
- For installation of flashers with lower or higher power consumption (Watt) than OEM
- For installation of indicators with higher voltage (Volt) than OEM since, on some bikes with a 12 volt system, the indicators are controlled with a lower (like 6V) voltage
- Allows installation of minus-switched turn signals
- Rotary switches allow required flashing frequency settings
Note: See 710413 for i.NEX-AddOn for use on Indian motorcycles

Kellerman, i.Nex - V12, equalizer

#996466

Stock:Yes

Warm white position front light.
ECE approved for front use position light.
It has a 3W input and an electrical voltage of 12V.
Comes with a black aluminum housing and sports Kellermann's high power LED technology for excellent visibility.
The Dayron offers a full area lighting with an extreme light output in either position light or running light through the use of the latest Kellermann clear lens technology with polycarbonate lenses.
Comes with a M8 adapter.
Dimensions: 59,9mm long x 63,5mm diameter, weight 228gram.

Kellermann, Dayron Classic WL, black. No turn signal

#993575

Stock:Yes

Plug and play connector set 152.Two adapter cables with matching plugs, 2 extension cables, and cable connectors.
- ECE approved
- Universal solution used to install turn signals without worries
- Built-in equalizer
- Triggering fault codes are prevented
- Compatible with CAN-bus and non- CAN bus models
- Compatible with either LED or non-LED lighting
- Compatible with minus switched turn signals
- Allows adjusting turn signal flashing frequency
- Compatible with regular turns signals, turn signals with running lights and and 3-1 (taillight, brake light, turn signal) combos
- Compatible with with turn signals that use a different current / wattage.
Adapter cable:
- Red Brake light
- White Tail light
- Green Turn signal
- Black Ground (-)
Extension cable:
- Cable colors can be assigned to any function

Kellermann, i.Nex connector set 152

#710408

Stock:Yes

For 3-1 rear turn signals.
Plug and play connector set 161. Two adapter cables with matching plugs, 2 extension cables, and cable connectors.
- ECE approved
- Universal solution used to install turn signals without worries
- Triggering fault codes are prevented
- Compatible with CAN-bus and non- CAN bus models
- Compatible with either LED or non-LED lighting
- Compatible with minus switched turn signals
- Allows adjusting turn signal flashing frequency
- Compatible with regular turns signals, turn signals with running lights and and 3-1 (taillight, brake light, turn signal) combos
- Compatible with with turn signals that use a different current / wattage.

Kellermann, i.Nex connector set 161

#710411

Stock:Yes

Plug and play connector set 151. Two adapter cables with matching plugs, 2 extension cables, and cable connectors.
- ECE approved
- Universal solution used to install turn signals without worries
- Built-in equalizer
- Triggering fault codes are prevented
- Compatible with CAN-bus and non- CAN bus models
- Compatible with either LED or non-LED lighting
- Compatible with minus switched turn signals
- Allows adjusting turn signal flashing frequency
- Compatible with regular turns signals, turn signals with running lights and and 3-1 (taillight, brake light, turn signal) combos
- Compatible with with turn signals that use a different current / wattage.
- Red brake light
- White: taillight
- Green: Turn signals
- Black: Ground (-)

Kellermann, i.Nex Connector set 151

#710407

Stock:Yes