20 of 80 search results

SORT ON:

Used to test electrical connections. Retractable test lead pulls out, and stays at desired length. Includes insulated alligator clips. Rewinds in protective case when not in use. With 18 gauge (ø1.02mm / 0.82mm²) copper wire. With 30 feet single wire.
Lang Tools

Lang Tools, retractable electrical test lead, std housing

#514396

Stock:Yes

12 mm (M12 x 1.25) threaded. Cleans thread in cylinder head from dirt, carbon build-up and metal particles. Used with 5/8" socket or 3/8" drive ratchet wrench.
Lang Tools

Lang, 12mm spark plug thread cleaner

#514465

Stock:Yes

25° reverse-offset head, incl. 4 bits. Std tooth. Mini reversible ratcheting wrench with very small (11cm overall length) dimensions. Accepts all regular 1/4" bits. Tool includes slotted (screwdriver) and Phillips bits.
Lang Tools

Lang Tools, mini ratcheting bit wrench. Reverse offset

#514176

Stock:Yes

Used to set correct spark plug gap with the built-in electrode gapping tools. The round wire allows correct gap measurements from all angles. For points ignitions Measures 0.025" to 0.045" (0.64mm to 1.14mm)
Lang Tools

Lang Tools spark plug gauge/gapper points ignition

#516139

Stock:Yes

15° offset/15° reverse-offset/flat adjustable head. 7-piece. Fine tooth. Comes with 5° ratchet increments. Mini reversible ratcheting wrench with very small (11cm overall length) dimensions. Accepts all regular 1/4" bits. Tool includes slotted (screwdriver) and Phillips bits.
Lang Tools

Lang Tools, mini ratcheting bit wrench. Fine tooth

#516621

Stock:No

Finger drive. Incl. bit extension. 6-piece set. Mini reversible ratcheting wrench for one hand use. With very small (11cm overall length) dimensions. Accepts all regular 1/4" bits. Tool includes slotted (screwdriver) and Phillips bits.
Lang Tools

Lang Tools, finger ratchet bit driver

#516623

Stock:Yes

Used to remove and install the rear isolator. Slides between the mount block and frame above the rear isolator. The ratchet tool expands the distance between the mount block and the frame so the isolator can be removed and a new one installed. USA made.
Lang Tools

Lang Tools, Buell rear isolator tool

#514170

Stock:Yes

- For sprocket shafts with 10 splines - Reversible ratcheting wrench - Used to rotate the crankshaft effortlessly, without damage to the sprocket shaft, when doing timing or clearance checks - USA made
Lang Tools

Lang, sprocket shaft wrench

#514160

Stock:Yes

Used to check and measure cylinder leakage on 4-stroke motorcycles. Works on an air compressor. Comes with dual gauges, a 35 PSI pressure gauge and a 0-100% percentage gauge. Fits spark plug holes of 14mm std, 14mm long and includes 12mm and 10mm adapters. Packed in a sturdy blow molded carrying case.
Lang Tools

Lang Tools, dual gauge leak down tester

#517193

Stock:No

Used to set-up correct end-play of the tapered sprocket shaft bearings in the left side crankcase
Lang Tools

Lang, sprocket shaft bearing end-play tool

#514168

Stock:Yes

13 inch long wrench. Used to remove/install OEM 3684, the 5/16-18 T40 bolt that holds the rear fender to the frame on various FLT/Touring models. Tire removal is not required.
Lang Tools

Lang Tools, rear fender bolt wrench

#514619

Stock:Yes

Large size. Used to pinch-off oil, fuel, vacuum radiator and other hoses as long as they are flexible. Professional quality. The patent pending narrow angled head is designed for best access in confined spaces. Plier comes with a self-locking mechanism that will hold the hose firmly. To unlock, simply pull plier handles apart. Note: See 599160 3-piece set that includes small, medium and large pinch off pliers.
Lang Tools

Lang Tools, angled hose pinch-off pliers. Large

#599159

Stock:Yes

Used to pinch-off oil, fuel, vacuum radiator and other hoses as long as they are flexible. This professional quality set comes with small, medium and large pliers to suit most motorcycle and automotive pinch-off applications. The patent pending narrow angled head is designed for best access in confined spaces. Pliers come with a self-locking mechanism that will hold the hose firmly. To unlock, simply pull plier handles apart. Note: For replacement pliers see 599157 Small, 599158 Medium and 599159 Large.
Lang Tools

Lang Tools, angled hose pinch-off plier set

#599160

Stock:Yes

For external threads. Incl. M6x1.0, M8x1.25, M10x1.50, M12x1.50, M12x1.75. Used to restore damaged external threads. This are special threaded restoring dies that ensure a good result and they are safer in restoring threads than using regular thread cutting taps and dies. Regular cutters are sharper and can easily further damage existing threads. Packed in a re-usable clamshell package. USA made. Note: Not suitable for cutting new threads.
Lang Tools

Lang Tools, 5-pc Metric thread restorer die set

#599164

Stock:Yes

31" (78.7cm) long. Curved pry bars manufactured from a high carbon content steel alloy with an orange nylon grip. The tip is angled for best access and leverage. With steel strike cap that is directly connected to the steel of the bar itself. Exceeds ASME (American Society of Mechanical Engineers) standards.
Lang Tools

Lang Tools, pry bar. 31" long

#599172

Stock:Yes

36" (94.4cm) long. Curved pry bars manufactured from a high carbon content steel alloy with an orange nylon grip. The tip is angled for best access and leverage. With steel strike cap that is directly connected to the steel of the bar itself. Exceeds ASME (American Society of Mechanical Engineers) standards.
Lang Tools

Lang Tools, pry bar. 36" long

#599173

Stock:Yes

Small size. Used to pinch-off oil, fuel, vacuum radiator and other hoses as long as they are flexible. Professional quality. The patent pending narrow angled head is designed for best access in confined spaces. Plier comes with a self-locking mechanism that will hold the hose firmly. To unlock, simply pull plier handles apart. Note: See 599160 3-piece set that includes small, medium and large pinch off pliers.
Lang Tools

Lang Tools, angled hose pinch-off pliers. Small

#599157

Stock:Yes

Medium size. Used to pinch-off oil, fuel, vacuum radiator and other hoses as long as they are flexible. Professional quality. The patent pending narrow angled head is designed for best access in confined spaces. Plier comes with a self-locking mechanism that will hold the hose firmly. To unlock, simply pull plier handles apart. Note: See 599160 3-piece set that includes small, medium and large pinch off pliers.
Lang Tools

Lang Tools, angled hose pinch-off pliers. Medium

#599158

Stock:Yes

12" (30.5cm long). Curved pry bars manufactured from a high carbon content steel alloy with an orange nylon grip. The tip is angled for best access and leverage. With steel strike cap that is directly connected to the steel of the bar itself. Exceeds ASME (American Society of Mechanical Engineers) standards.
Lang Tools

Lang Tools, pry bar. 12" long

#599169

Stock:Yes

17" (43.2cm) long. Curved pry bars manufactured from a high carbon content steel alloy with an orange nylon grip. The tip is angled for best access and leverage. With steel strike cap that is directly connected to the steel of the bar itself. Exceeds ASME (American Society of Mechanical Engineers) standards.
Lang Tools

Lang Tools, pry bar. 17" long

#599170

Stock:Yes