BIKE SELECTOR

20 of 30 search results

Sort on:

37 liter, real leather, 48 x 29.5 x 26.5cm w x d x h
Ledrie

Motorcycle suitcase black

#515859

Stock:Yes

Straight (non triangular) shaped. Approx. dimensions: 25cm wide x 13cm deep x 33cm high. Dimensions and capacity are approximate and for reference only. With a special HPDE reinforced backside. Note: All swingarm bags are installed with and include leather straps.
Ledrie

Ledrie, full leather swing arm bag left, 10 liter. Black

#923326

Stock:Yes

Full leather black sissy bar bag. Universally allows installation, with the included leather straps with buckles, to most sissy bar uprights. Approx. dimensions: 17cm wide x 10cm deep x 23cm high.
Ledrie

Ledrie, full leather sissy bar bag. Black

#923344

Stock:No

Basket Weave inlay. 33 liter per bag. Dimensions per bag: 55.5cm long x 19cm wide x 32cm high. Manufactured from premium quality 2.8mm thick split leather. All saddlebags, side bags and sissy bar bags come with a 4mm thick HDPE (polyethylene thermoplastic) back panel, unless mentioned otherwise. This is same material of which, for instance, kayaks are made, to ensure maximum strength & shape retention under harsh conditions. The reinforcing plate is sewn onto the leather, giving it excellent strength and great universal mounting options. A special groove is cut into the HDPE back plate, allowing for lowered stitching in the groove, below the surface of the back plate. This protects stitching from abrasion. All bags are pre-treated with a special oil for maximum life and water resistance. All bags are hand-made by experienced personnel to ensure a continuous high quality standard. Mounting note: These saddlebags can be used with the 559467 universal Ledrie saddlebag carrier set or with the 55946 Ledrie universal saddlebag support bracket. Since motorcycle specific application and rider preference differs no hardware is included and no provisions are made to mount the saddlebag to saddlebag carrier. Holes can be drilled in the reinforced rear section of the saddlebag, at the desired point and installed to the universal carrier frame, which must be ordered separately, or custom made. Many riders prefer a simple but effective installation to the carrier with some sturdy cable straps. Mounting note: Model specific hardware kits are available as 559463 for 91-03 Sportster, 559464 for 04-13 Sportster, 559465 for 86-17 Softail; 96-17 Dyna (excl. FLD); 14-20 Sportster. Note: 559457 turn signal relocation kit is available for 96-17 Dyna (excl. FLD Switchback models). Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, reinforced rigid leather saddlebag set. BW. 33 liter

#515813

Stock:Yes

32 liter, genuine leather, 42 x 29 x 26cm w x d x h
Ledrie

Motorcycle suitcase black

#515858

Stock:Yes

26 liter, dimensions 36x29x26cm. Leather Touring Bag, reinforced in bottom & both sides for maximum shape retention. The carry handle will ease transport off the bike. Attaches securely with included leather straps to luggage rack, sissy bar or on the top case of Touring models. Note: Dimensions are width x depth x height in centimeters. Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, motorcycle suitcase. Black leather, 26 liter

#515857

Stock:Yes

Straight (non triangular) shaped. Approx. dimensions: 33cm high x 25cm wide x 13cm deep. Dimensions and capacity are approximate and for reference only. With a special HPDE reinforced backside. Note: All swingarm bags are installed with and include leather straps.
Ledrie

Ledrie, full leather swing arm bag left, 9 liter. Black

#923325

Stock:No

28 liter per bag. Dimensions per bag: 52cm long x 17cm wide x 32cm high. Manufactured from premium quality 2.8mm thick split leather. All saddlebags, side bags and sissy bar bags come with a 4mm thick HDPE (polyethylene thermoplastic) back panel, unless mentioned otherwise. This is same material of which, for instance, kayaks are made, to ensure maximum strength & shape retention under harsh conditions. The reinforcing plate is sewn onto the leather, giving it excellent strength and great universal mounting options. A special groove is cut into the HDPE back plate, allowing for lowered stitching in the groove, below the surface of the back plate. This protects stitching from abrasion. All bags are pre-treated with a special oil for maximum life and water resistance. All bags are hand-made by experienced personnel to ensure a continuous high quality standard. Mounting note: These saddlebags can be used with the 559467 universal Ledrie saddlebag carrier set or with the 55946 Ledrie universal saddlebag support bracket. Since motorcycle specific application and rider preference differs no hardware is included and no provisions are made to mount the saddlebag to saddlebag carrier. Holes can be drilled in the reinforced rear section of the saddlebag, at the desired point and installed to the universal carrier frame, which must be ordered separately, or custom made. Many riders prefer a simple but effective installation to the carrier with some sturdy cable straps. Mounting note: Model specific hardware kits are available as 559463 for 91-03 Sportster, 559464 for 04-13 Sportster, 559465 for 86-17 Softail; 96-17 Dyna (excl. FLD); 14-20 Sportster. Note: 559457 turn signal relocation kit is available for 96-17 Dyna (excl. FLD Switchback models). Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, reinforced rigid leather saddlebag set. 28 liter

#515808

Stock:Yes

67 liter, real leather, 58.5 x 35 x 33cm w x d x h
Ledrie

Motorcycle suitcase black

#515861

Stock:No

25 liter per bag. Dimensions per bag: 52cm long x 17.5cm wide x 28cm high. Manufactured from premium quality 2.8mm thick split leather. All saddlebags, side bags and sissy bar bags come with a 4mm thick HDPE (polyethylene thermoplastic) back panel, unless mentioned otherwise. This is same material of which, for instance, kayaks are made, to ensure maximum strength & shape retention under harsh conditions. The reinforcing plate is sewn onto the leather, giving it excellent strength and great universal mounting options. A special groove is cut into the HDPE back plate, allowing for lowered stitching in the groove, below the surface of the back plate. This protects stitching from abrasion. All bags are pre-treated with a special oil for maximum life and water resistance. All bags are hand-made by experienced personnel to ensure a continuous high quality standard. Mounting note: These saddlebags can be used with the 559467 universal Ledrie saddlebag carrier set or with the 55946 Ledrie universal saddlebag support bracket. Since motorcycle specific application and rider preference differs no hardware is included and no provisions are made to mount the saddlebag to saddlebag carrier. Holes can be drilled in the reinforced rear section of the saddlebag, at the desired point and installed to the universal carrier frame, which must be ordered separately, or custom made. Many riders prefer a simple but effective installation to the carrier with some sturdy cable straps. Mounting note: Model specific hardware kits are available as 559463 for 91-03 Sportster, 559464 for 04-13 Sportster, 559465 for 86-17 Softail; 96-17 Dyna (excl. FLD); 14-20 Sportster. Note: 559457 turn signal relocation kit is available for 96-17 Dyna (excl. FLD Switchback models). Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, reinforced rigid leather saddlebag set. 25 liter

#515812

Stock:No

32 liter per bag. Dimensions per bag: 56cm long x 18cm wide x 32cm high. Manufactured from premium quality 2.8mm thick split leather. All saddlebags, side bags and sissy bar bags come with a 4mm thick HDPE (polyethylene thermoplastic) back panel, unless mentioned otherwise. This is same material of which, for instance, kayaks are made, to ensure maximum strength & shape retention under harsh conditions. The reinforcing plate is sewn onto the leather, giving it excellent strength and great universal mounting options. A special groove is cut into the HDPE back plate, allowing for lowered stitching in the groove, below the surface of the back plate. This protects stitching from abrasion. All bags are pre-treated with a special oil for maximum life and water resistance. All bags are hand-made by experienced personnel to ensure a continuous high quality standard. Mounting note: These saddlebags can be used with the 559467 universal Ledrie saddlebag carrier set or with the 55946 Ledrie universal saddlebag support bracket. Since motorcycle specific application and rider preference differs no hardware is included and no provisions are made to mount the saddlebag to saddlebag carrier. Holes can be drilled in the reinforced rear section of the saddlebag, at the desired point and installed to the universal carrier frame, which must be ordered separately, or custom made. Many riders prefer a simple but effective installation to the carrier with some sturdy cable straps. Mounting note: Model specific hardware kits are available as 559463 for 91-03 Sportster, 559464 for 04-13 Sportster, 559465 for 86-17 Softail; 96-17 Dyna (excl. FLD); 14-20 Sportster. Note: 559457 turn signal relocation kit is available for 96-17 Dyna (excl. FLD Switchback models). Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, reinforced rigid leather saddlebag set. 32 liter

#515854

Stock:Yes

Genuine full leather bag. Installs with included leather straps. With a special HPDE reinforced backside. Approx. dimensions: 28/37cm wide x 9cm deep x 16.5/27cm high. Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, leather swingarm bag left, 6.5 liter. Black

#923343

Stock:No

A symmetrical full leather saddlebag, for either right or left side use. With a special HPDE reinforced backside. The reinforced backside allows drilling mounting holes in the required places to make this bag fit most applications. A saddlebag support and mounting straps are not included. Weight 1.67kg. Approx. dimensions: 39cm wide x 35cm high x 13cm deep. Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, leather single saddlebag, 18 liter. Black

#923342

Stock:No

15 liter per bag. Dimensions per bag: 39cm long x 13cm wide x 30cm high. Manufactured from premium quality 2.8mm thick split leather. All saddlebags, side bags and sissy bar bags come with a 4mm thick HDPE (polyethylene thermoplastic) back panel, unless mentioned otherwise. This is same material of which, for instance, kayaks are made, to ensure maximum strength & shape retention under harsh conditions. The reinforcing plate is sewn onto the leather, giving it excellent strength and great universal mounting options. A special groove is cut into the HDPE back plate, allowing for lowered stitching in the groove, below the surface of the back plate. This protects stitching from abrasion. All bags are pre-treated with a special oil for maximum life and water resistance. All bags are hand-made by experienced personnel to ensure a continuous high quality standard. Mounting note: These saddlebags can be used with the 559467 universal Ledrie saddlebag carrier set or with the 55946 Ledrie universal saddlebag support bracket. Since motorcycle specific application and rider preference differs no hardware is included and no provisions are made to mount the saddlebag to saddlebag carrier. Holes can be drilled in the reinforced rear section of the saddlebag, at the desired point and installed to the universal carrier frame, which must be ordered separately, or custom made. Many riders prefer a simple but effective installation to the carrier with some sturdy cable straps. Mounting note: Model specific hardware kits are available as 559463 for 91-03 Sportster, 559464 for 04-13 Sportster, 559465 for 86-17 Softail; 96-17 Dyna (excl. FLD); 14-20 Sportster. Note: 559457 turn signal relocation kit is available for 96-17 Dyna (excl. FLD Switchback models). Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, reinforced rigid leather saddlebag set. Throw-over

#515817

Stock:No

Genuine leather bag with a special HPDE reinforced backside. Dimensions: 28 wide x13 deep x39cm high Note: Dimensions and capacity are approximate and for reference only. Note: All swingarm bags are installed with and include leather straps.
Ledrie

Ledrie, full leather swingarm bag left, 6.5 liter. Black

#923339

Stock:Yes

A full leather small and symmetrical 30 liter saddlebag for all necessities. Can be used on either left or right side of the bike. Installs with the included leather straps. With a special HPDE reinforced backside. The reinforced backside allows drilling mounting holes in the required places to make this bag fit most applications. A saddlebag support and mounting straps are not included. Weight 2.5kg. Approx. dimensions: 43cm wide x 41cm high x 21cm deep. Note: Capacity in liters is per bag. Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, single leather saddlebag 'Postman'. 30 liters. Black

#923341

Stock:No

17 liter per bag. Dimensions per bag: 43cm long x 16cm wide x 26cm high. Manufactured from premium quality 2.8mm thick split leather. All saddlebags, side bags and sissy bar bags come with a 4mm thick HDPE (polyethylene thermoplastic) back panel, unless mentioned otherwise. This is same material of which, for instance, kayaks are made, to ensure maximum strength & shape retention under harsh conditions. The reinforcing plate is sewn onto the leather, giving it excellent strength and great universal mounting options. A special groove is cut into the HDPE back plate, allowing for lowered stitching in the groove, below the surface of the back plate. This protects stitching from abrasion. All bags are pre-treated with a special oil for maximum life and water resistance. All bags are hand-made by experienced personnel to ensure a continuous high quality standard. Mounting note: These saddlebags can be used with the 559467 universal Ledrie saddlebag carrier set or with the 55946 Ledrie universal saddlebag support bracket. Since motorcycle specific application and rider preference differs no hardware is included and no provisions are made to mount the saddlebag to saddlebag carrier. Holes can be drilled in the reinforced rear section of the saddlebag, at the desired point and installed to the universal carrier frame, which must be ordered separately, or custom made. Many riders prefer a simple but effective installation to the carrier with some sturdy cable straps. Mounting note: Model specific hardware kits are available as 559463 for 91-03 Sportster, 559464 for 04-13 Sportster, 559465 for 86-17 Softail; 96-17 Dyna (excl. FLD); 14-20 Sportster. Note: 559457 turn signal relocation kit is available for 96-17 Dyna (excl. FLD Switchback models). Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, reinforced rigid leather saddlebag set. 17 liter

#515851

Stock:No

Universal leather bag for custom use. Without reinforcement, no leather straps. Capacity 1.5 liter. Dimensions 26 wide x 7cm deep x13cm high. Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, leather front bag. Black

#515946

Stock:No

Black leather with black buckles. Installs with included leather straps. Capacity 1 liter. Approx. dimensions 30cm wide x 11cm diameter. Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, leather tool roll. Black with black buckles. 1L.

#515939

Stock:Yes

Genuine full leather bag with HDPE reinforced backside. Installs with included leather straps. Approx. dimensions: 31cm wide x 13.5cm deep x 35cm high. Note: Dimensions and capacity are approximate and for reference only.
Ledrie

Ledrie, leather swing arm bag left, 12 liter. Black

#515818

Stock:Yes