Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 201 search results

Sort on:

Sort on:

'Plug & Ride' CAN-bus version, complete with handlebar bracket, for a super-easy installation in 10 minutes.
No technical knowledge and no modifications required.
Simply disconnect the plug of the original instrument, loosen the four screws of the handlebar clamp, screw on the Motoscope Pro with the bracket and plug the connector into the OBD socket under the seat.
Compatible with all 11-up CAN-bus models.
Comes with a bolt-on mounting bracket and plug and play connector.
The Motoscope is operated identical to the original instrument via the menu button on the handlebars.
Data is processed by a 16 bit Risc processor, which drives 734 LED's for a full panel self-illuminated display matrix. Clear vision, unlike LCD, even in direct sunlight. The main and secondary displays are self-configurable, another display shows the selected gear. Fully J1850-bus driven. Apart from regular functions, the Motoscope Pro includes: Adjustable RPM scale, from 0-6000 to 0-18.000 rpm., hour meter (time in use), adjustable shift light (up to 20.000 rpm), 0-100 km/h / 0-60 mph acceleration times, average speed, maximum speed, various warning functions and more. Dimensions: 109mm wide x 17mm high x 11mm deep.
Note: The original fuel gauge cannot be displayed via the Motoscope Pro.

Motogadget, H-D Motoscope Pro with clamp. Black. CAN-bus

#999441

Stock:No

Black housing, with stainless steel switches, for both 1" (25.4mm) and 22mm diameter handlebars. With 3 momentary micro push button switches. Great looks for virtually any custom application.

Note: Designed for use with relays.

Motogadget, mo.switch 3 push button housing. Black

#701327

Stock:Yes

Black housing, with stainless steel switches, for both 1" (25.4mm) and 22mm diameter handlebars. With 2 momentary micro push button switches. Great looks for virtually any custom application.

Note: Designed for use with relays.

Motogadget mo.switch 2 push button housing. Black

#701326

Stock:Yes

Polished.
Bracket 'A style'.
Universal precision laser-cut 2.5mm thick aluminum bracket to mount the Motoscope Mini to your bike.
Can be cut and drilled to suit your specific application.
Overall dimensions approx. 10cm high x 9cm wide.

Motogadget mounting bracket for Motoscope Mini, polished

#930203

Stock:Yes

Bolt-on for 1" (25.4mm) diameter handlebars.
Polished aluminum.
Allows the Motoscope Mini (MSM) digital gauge to be mounted on the handlebars with the Combi Frame bracket (930275 polished or 930276 black anodized).
No handlebar drilling required.
Comes with the mounting plate and handlebar clip kit with correct length stainless screws.
The Combi frame bracket and the Motoscope mini are not included.
- 56mm diameter
- 60mm long

Motogadget, MSM combi bracket clip kit. 1". Polished

#930273

Stock:Yes

Polished CNC machined billet aluminum.
For 28.6mm diameter handlebars.
Used to mount the Motoscope Mini (MSM) digital instrument gauge on the handlebar together with the Combi Frame (930277 polished or 930280 black anodized).
The handlebar must be drilled.
Comes with the mounting plate and the required screws.
Note: The Combi Frame and the Motoscope Mini are not included

Motogadget, MSM bolt-on handlebar bracket. 28.6mm. Polished

#830101

Stock:Yes

Black anodized.
Bracket 'A style'.
Universal precision laser-cut 2.5mm thick aluminum bracket to mount the Motoscope Mini to your bike.
Can be cut and drilled to suit your specific application.
Overall dimensions approx. 10cm high x 9cm wide.

Motogadget mounting bracket for Motoscope Mini, black

#930201

Stock:Yes

Stainless steel.
Universal installation bracket for 'Motoscope Mini' digital speedometer / instrument gauge.

Motogadget, MSM weld-on bracket. Polished

#930283

Stock:No

Black anodized aluminum.
2-piece clamp kit for 1" (25.4mm) diameter handlebars.
Used to mount the Motoscope Mini to the handlebars.
No drilling required.

Motogadget, Motoscope Mini handlebar clip kit. 1". Black

#930198

Stock:Yes

Black anodized CNC machined billet aluminum.
For 1" (25.3mm) diameter handlebars.
Used to mount the Motoscope Mini (MSM) digital instrument gauge on the handlebar together with the Combi Frame (930277 polished or 930280 black anodized).
The handlebar must be drilled.
Comes with the mounting plate and required screws.
Note: The Combi Frame and the Motoscope Mini are not included

Motogadget, MSM bolt-on handlebar bracket. 1". Black

#930276

Stock:Yes

Polished aluminum.
2-piece clamp kit for 22mm diameter handlebars.
Used to mount the Motoscope Mini to the handlebars.
No drilling required.

Motogadget, Motoscope Mini handlebar clip kit. 22mm. Pol.

#930197

Stock:Yes

Black anodized CNC machined billet aluminum.
For 28.6 mm diameter handlebars.
Used to mount the Motoscope Mini (MSM) digital instrument gauge on the handlebar together with the Combi Frame (930277 polished or 930280 black anodized).
The handlebar must be drilled.
Comes with the mounting plate and required screws.
Note: The Combi Frame and the Motoscope Mini are not included

Motogadget, MSM bolt-on handlebar bracket. 28.6mm. Black

#830100

Stock:Yes

Black anodized Contrast Cut machined billet aluminum.
Used to stylish mount the Motoscope Tiny to a 1" diameter handlebar.
Complete with stainless steel mounting screws.
- Black anodized.
- For 1" handlebars.
- 56mm diameter
- 60mm long

Motogadget, Tiny mount cup 'Grooved' 1". Black CC

#930256

Stock:No

Black anodized Contrast Cut machined billet aluminum.
Used to stylish mount the Motoscope Tiny to a 22mm diameter handlebar.
Complete with stainless steel mounting screws.
- For 22mm handlebars
- 56mm diameter
- 60mm long

Motogadget, Tiny mount cup 'Grooved' 22mm. Black CC

#830110

Stock:Yes

Approx. 15mm OD and 6mm ID. Large. Ring Neodymium magnet. A universal and powerful magnet. For speedo sensor drive or other use.
Note: See 930359 for small ring magnet. 10mm OD and 4mm ID

Motogadget, magnet ring 15/6 (large)

#930360

Stock:Yes

Motogadget, end caps for mo.grip handlebar grip set. Black

#930292

Stock:Yes

Polished aluminum finish. Black anodized finish. Turn signals with an 8mm threaded stud for universal applications. With 3W Power LED performance and special 180° lighting effect through the clear transparent glass-like material.
- ECE approved for both front / rear use. Largest diameter 20.5mm, OAL 83mm, OAL without thread 65mm, wiring length 100cm. With 3W power LEDs.

Motogadget, mo.blaze Ice LED turn signals. Polished

#930300

Stock:No

Fits 22mm (7/8") diameter handlebars. Includes 3 momentary truly miniature push-button switches and 2 meter wiring.
Installs with two M5 screws that are flush mounted.
When installing two of these switches opposite to each other you will have 6 switches of which the housings together are still not larger than a regular a regular switch housing.
Dimensions: 45mm OD x 14mm wide.

Note: Designed for use with relays.

Motogadget, mo.switch mini. Polished, 22mm (7/8")

#830113

Stock:Yes

Black with Polished Bezel.
On this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed & all other functions are shown digitally in red LED's.
When switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated.
The digital display has two lines. The top line shows the gear and speed/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark.
Note: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A / 936578 Breakout Box B for universal applications.
- Dimensions: 80mm diameter x just 22mm deep
- 11 indicator lights: Immobilizer / alarm (Plug & Ride only), Reserve, Oil temperature / water temperature, engine control / MIL / ABS / ASR (Plug & Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light
- Compatible with CAN-bus vehicles
- White illuminated pointer / needle
- Shift light adjustable 0-20.000 RPM
Digital display:
- Gear indicator
- Speed 999 [km/h/mph]
- Trip A 999.9 [km/mi]
- Trip B 999.9 [km/mi]
- Odometer 999999 [km/mi]
- Oil temperature 0-200 [°C / °F]
- Water temperature 0-200 [°C/°F]
- Air temperature -20 - 100 [°C/°F]
- Oil pressure 0 - 10.0 [bar/psi]
- Operating hours counter 9999 [h]
- Travel time [hour/minutes/seconds]
- Clock
- Time 0-100 km/h - 0 to 99.99 s
- Acceleration 0 - 2.00 [G]
- Average speed 999 [km/h/mph]
- Maximum speed 999 [km/h/mph]
- Maximum positive acceleration 0 - 2.00 [G]
- Maximum negative acceleration 0 - 2.00 [G]
- Maximum RPM digital 20.000 RPM
- On-board voltage 9V - 18V
- Fuel gauge 0% - 100%
Adjustable warning messages:
- Oil temperature
- Water temperature
- On-board voltage
- Air temperature
- Oil pressure
- Tank capacity
- Service interval
- Speed warning (gear shift flash)
Chromeclassic 2 includes:
- Instrument with 75 cm connection cable & plug connection
- Cable fuse
- Speedometer sensor with 150 cm connection cable & two magnets
- Mini push button
- Stainless steel mounting screws
- QR code for mounting and operating instruction

Motogadget, Chronoclassic 2 'Tacho Face'. 10.000 RPM. Pol. B

#994304

Stock:Yes

Black with Polished Bezel.
On this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed & all other functions are shown digital in red LED's.
When switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated.
The digital display has two lines. The top line shows the gear and speed/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark.
Note: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A / 936578 Breakout Box B for universal applications.
- Dimensions: 80mm diameter x just 22mm deep
- 11 indicator lights: Immobilizer / alarm (Plug & Ride only), Reserve, Oil temperature / water temperature, engine control / MIL / ABS / ASR (Plug & Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light
- Compatible with CAN-bus vehicles
- White illuminated pointer / needle
- Shift light adjustable 0-20.000 RPM
Digital display:
- Gear indicator
- Speed 999 [km/h/mph]
- Trip A 999.9 [km/mi]
- Trip B 999.9 [km/mi]
- Odometer 999999 [km/mi]
- Oil temperature 0-200 [°C / °F]
- Water temperature 0-200 [°C/°F]
- Air temperature -20 - 100 [°C/°F]
- Oil pressure 0 - 10.0 [bar/psi]
- Operating hours counter 9999 [h]
- Travel time [hour/minutes/seconds]
- Clock
- Time 0-100 km/h - 0 to 99.99 s
- Acceleration 0 - 2.00 [G]
- Average speed 999 [km/h/mph]
- Maximum speed 999 [km/h/mph]
- Maximum positive acceleration 0 - 2.00 [G]
- Maximum negative acceleration 0 - 2.00 [G]
- Maximum RPM digital 20.000 RPM
- On-board voltage 9V - 18V
- Fuel gauge 0% - 100%
Adjustable warning messages:
- Oil temperature
- Water temperature
- On-board voltage
- Air temperature
- Oil pressure
- Tank capacity
- Service interval
- Speed warning (gear shift flash)
Chromeclassic 2 includes:
- Instrument with 75 cm connection cable & plug connection
- Cable fuse
- Speedometer sensor with 150 cm connection cable & two magnets
- Mini push button
- Stainless steel mounting screws
- QR code for mounting and operating instruction

Motogadget, Chronoclassic 2 'Tacho Face'. 14.000 RPM. Pol. B

#994306

Stock:Yes