Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 135 search results

Sort on:

Sort on:

Chrome plated aluminum. For 7/8" (22mm) diameter handlebars. Momentary quad button micro switch, designed for use with a relay. Switch is IP65 rated, meaning totally dust-proof and low pressure water-proof.

Motone, micro switch with 4 buttons. Chrome

#591254

Stock:Yes

Shot blast finish. ECE approved. Manufactured from die-cast aluminum but complete with modern and much more vibration-proof LED lighting. License plate illumination is done through a slot in the under side of the taillight body. Includes a style matching mounting bracket with matching rubber mount gasket for 'on fender' use and all required hardware.

Motone Big Fin Tail light with fender mount

#575394

Stock:Yes

Black. ECE approved. Manufactured from die-cast aluminum but complete with modern and much more vibration-proof LED lighting. License plate illumination is done through a slot in the under side of the taillight body. Includes a style matching mounting bracket with matching rubber mount gasket for 'on fender' use and all required hardware.

Motone Big Fin Tail light with fender mount

#575395

Stock:Yes

Shot blast finish. ECE approved. Manufactured from die-cast aluminum but complete with modern and much more vibration-proof LED lighting. License plate illumination is done through a slot in the under side of the taillight body. Includes a style matching mounting bracket with matching rubber mount gasket for 'on fender' use and all required hardware.

Motone Bel Air tail light with fender mount

#568767

Stock:Yes

This bracket is for moving the regulator down 90 degrees so that it fits under the bottom triple tree. This allows you to tuck the headlamp further back and closer to the frame of your bike for a cleaner look.

Note: Re-wiring is not required but Motone recommends removing the fuel tank and freeing up some additional wiring from the bindings under the tank to get more slack.

Motone regulator relocation bracket. Black

#905846

Stock:Yes

Black anodized. Clamps around the fork tubes to allow installation of M10x1.25 or M10x1.50 threaded turn signals. The hinged design folds open for easy installation and fork disassembly is not required. Clamps are CNC machined from billet 6061-T6 aluminum with a special machined billet nut that slides over the threads. Comes with two M10x1.25 nuts and two M10x1.50 nuts for installing the stem of the turn signal.

Motone, Wrap-around turn signal brackets, 47mm forks

#905817

Stock:Yes

CNC machined from solid C36000 billet brass. Fits the top shock mounts of Triumph. The perfect anchor point to attach you luggage strap, bungee cord or otherwise secure you luggage without slip, slide or flip issues. Designed for a direct installation on Triumph but custom installation options are plentiful.

Motone, The Capstan! bungee hook attachment. Brass

#905734

Stock:Yes

CNC machined from solid 6061-T6 aluminum. Fits the top shock mounts of Triumph. The perfect anchor point to attach you luggage strap, bungee cord or otherwise secure you luggage without slip, slide or flip issues. Designed for a direct installation on Triumph but custom installation options are plentiful.

Motone, The Capstan! bungee hook attachment. Aluminum

#905736

Stock:Yes

These are called AC Pannier rails, luggage rails or saddlebag supports and used when installing saddlebags. Manufactured from 16mm diameter grade 304 stainless steel tubing with a 1.25mm wall thickness. Welds are smooth for a detailed professional finish.

Motone, Triumph saddlebag support. Polished stainless

#905743

Stock:Yes

Hot forging is used to produce a high quality precision products that do not have typical CNC machined looks. This chain tensioner set is produced using an old time manufacturing process, perfectly matching Triumph in more ways than one. For true individuality they were hand polished to reveal the facets of the forging process. Includes a high grade 304 stainless bolt.

Motone, Vintage hot forged chain adjuster kit. Brass

#905747

Stock:Yes

Quicksilver polished finish. Drawn from 5052 aluminum sheet material. Motone created the Airblade originally for the Triumph Bonneville T100 but the awsome windsplitter looks rub-off on anything its mounted to. All custom applications are yet to be discovered!

Motone Airblade screen, aluminum. Quicksilver polished

#905832

Stock:Yes

Mirror polished finish. Drawn from 5052 aluminum sheet material. Motone created the Airblade originally for the Triumph Bonneville T100 but the awsome windsplitter looks rub-off on anything its mounted to. All custom applications are yet to be discovered!

Motone Microblade screen, aluminum. Mirror polished

#905834

Stock:Yes

Brushed finish. Drawn from 5052 aluminum sheet material. Motone created the Airblade originally for the Triumph Bonneville T100 but the awsome windsplitter looks rub-off on anything its mounted to. All custom applications are yet to be discovered!

Motone Airblade screen, aluminum. Brushed finish

#905831

Stock:Yes

Made from 304 stainless steel in a design inspired by the Tanto, a short tradional Japanese sword. Perfect to give you the cutting edge. Fits as a direct replacement for the stock chain guard.

Motone, Tanto chain guard. Polished

#905759

Stock:Yes

Polished finish. Clamps around the fork tubes to allow installation of M10x1.25 or M10x1.50 threaded turn signals. The hinged design folds open for easy installation and fork disassembly is not required. Clamps are CNC machined from billet 6061-T6 aluminum with a special machined billet nut that slides over the threads. Comes with two M10x1.25 nuts and two M10x1.50 nuts for installing the stem of the turn signal.

Motone, Wrap-around turn signal brackets, 35mm forks

#905808

Stock:Yes

Polished finish. Precision CNC machined from aviation grade billet 6061 T6 aluminum. This is the long XL (70mm without thread) version which hangs out the back of the seat. This is the most practical, as these can be operated by hand.

Motone, long quick release seat bolts. 70mm, polished

#905857

Stock:Yes

Polished. Precision CNC machined from aviation grade billet 6061 T6 aluminum. This is the regular (45mm without thread) version with integrated stainless hex head (allen head) bolt so it can be torqued with allen key when required as well. With knurled sides for tool-less turning.

Motone, medium quick release seat bolts. 45mm, polished

#905859

Stock:Yes

For liquid cooled Bonnies. These adapters allow Motone and other aftermarket turn signals to be plugged straight into the stock factory loom, no splicing of modifications required. Sold in a pair, for left & right side.

Motone, Triumph turn signal wiring adapter

#905779

Stock:Yes

Polished arm with a clear knurled peg. Fully adjustable shifter arm through the use of slotted holes. Adjusts forward & back and up & down to find the shifting sweet spot. Complete with knurled peg. Precision CNC machined from 6061-T6 billet aluminum construction.

Motone, adjustable shifter peg. Polished

#905819

Stock:Yes

Black anodized finish with a contrast cut chamfered edge. Precision CNC machined from aviation grade billet 6061 T6 aluminum. This is the regular (45mm without thread) version with integrated stainless hex head (allen head) bolt so it can be torqued with allen key when required as well. With knurled sides for tool-less turning.

Motone, medium quick release seat bolts. 45mm, black

#905858

Stock:Yes