Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 474 search results

Sort on:

Sort on:

Supplies ground and switched 12-volt power without CAN/Bus interference.

NAMZ, electrical power connection for navigation, audio, hea

#710112

Stock:Yes

Polished and clear anodized billet throttle body cover for OEM M8 or aftermarket throttle body. Includes replacement polished stainless allen screws to replace the OEM T-20 security Torx screws.

NAMZ, NOS billet throttle body cover. Clear

#710069

Stock:Yes

NOS black anodized billet throttle body cover for OEM M8 or aftermarket throttle body. Pro-polished then black anodized finish, includes replacement polished stainless Allen screws to replace OEM T-20 security Torx screws.

NAMZ, NOS billet throttle body cover. Black

#710068

Stock:Yes

NAMZ, Trailer Isolator with 12-Position Molex

#710113

Stock:Yes

NAMZ, Trailer Isolator with 12-Position Molex

#710114

Stock:Yes

18 position female connector with terminals, ECM (B) connector.
OEM replacement reference 69201440

NAMZ, 18-Position female connector. Gray

#710054

Stock:Yes

2-way pin. 2-way. Complete with terminals and wire seals.
OEM replacement reference 69201397

NAMZ, connector engine temperature sensor

#710070

Stock:Yes

19 position female connector with terminals, ECM (C) connector.
OEM replacement reference 69201415

NAMZ, 18-Position female connector. Brown

#710055

Stock:Yes

NAMZ, Power Port Y-Adapter

#710110

Stock:No

NAMZ, Speedometer & Instrument Extension Harness, 100% Plug-

#710111

Stock:No

AMP Mate-n-Lock watertight and interlocking connectors. Used on motorcycles by OEM manufacturers since the mid 80's and still to be found on many bikes today. All connectors include watertight seals.

Note: Male Plug pins, available as 548186, must be purchased separately.
Note: 548179 for the matching 4-pin female style receptacle plug.

NAMZ, AMP connector. plug, 4-pins

#548178

Stock:Yes

18" (45.7cm) long. Comes fully assembled with everything you need to install. Braided stainless steel harness is covered in a clear PVC layer that does not crack or turn yellow.

NAMZ, headlamp wiring harness. Braided, 18"

#548104

Stock:Yes

'- With a translucent (see-through) clear protective cover
- 4 gauge (5.19mm diameter) wire with more than 1550 strands of individual wires making it very flexible
- Lugs are silver tinned and come with 1/4" (6.4mm) and 5/16" (7.9mm) holes

NAMZ, battery cable set. Clear. 7 inch (17.5cm)

#548111

Stock:Yes

'- With a translucent (see-through) clear protective cover
- 4 gauge (5.19mm diameter) wire with more than 1550 strands of individual wires making it very flexible
- Lugs are silver tinned and come with 1/4" (6.4mm) and 5/16" (7.9mm) holes

NAMZ, battery cable set. Clear. 19 inch (48cm)

#548117

Stock:Yes

24" (61cm) long. For handlebar mounted turn signals. Fully assembled wiring harness with braided stainless steel hose. Ready to install.

NAMZ, custom turn signal wiring harness. Braided, 24"

#548102

Stock:Yes

With black connector housings. Have it all in one box. Includes an assortment of 4 of each 2, 3, 4, 8 and 12-pin connectors, 6 of each 6-pin connectors. Also included are the required terminal pins, 100 plug pins and 100 receptacle pins of the stamped pin type.

Note: See 548170 for the recommended crimp tool.
Note: Deutsch DT series connectors and terminal pins are available for refill orders.

NAMZ, Deutsch DT series Builders Shop kit. Black

#548173

Stock:Yes

AMP Mate-n-Lock watertight and interlocking connectors. Used on motorcycles by OEM manufacturers since the mid 80's and still to be found on many bikes today. All connectors include watertight seals.

Note: Male Plug pins, available as 548186, must be purchased separately.
Note: 548175 for the matching 2-pin female style receptacle plug.

NAMZ, AMP connector. Plug, 2-pins

#548174

Stock:Yes

AMP Mate-n-Lock watertight and interlocking connectors. Used on motorcycles by OEM manufacturers since the mid 80's and still to be found on many bikes today. All connectors include watertight seals.

Note: receptacle pins, available as 548187, must be purchased separately.
Note: 548174 for the matching 2-pin plug with male style plug pins. .

NAMZ, AMP connector. receptacle, 2-pins

#548175

Stock:Yes

AMP Mate-n-Lock watertight and interlocking connectors. Used on motorcycles by OEM manufacturers since the mid 80's and still to be found on many bikes today. All connectors include watertight seals.

Note: receptacle pins, available as 548187, must be purchased separately.
Note: 548178 for the matching 4-pin plug with male style plug pins.

NAMZ, AMP connector. receptacle, 4-pins

#548179

Stock:Yes

'- With a translucent (see-through) clear protective cover
- 4 gauge (5.19mm diameter) wire with more than 1550 strands of individual wires making it very flexible
- Lugs are silver tinned and come with 1/4" (6.4mm) and 5/16" (7.9mm) holes

NAMZ, battery cable set. Clear. 15 inch (38cm)

#548115

Stock:Yes