Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 171 search results

Sort on:

Sort on:

Chrome; Steel; Built-in straight risers with smooth polished welds and fluid bends. 25° wrist angle. 3-1/2" center to center spacing to fit standard style triple trees. Standard 1/2-13 threaded and drilled for internal wiring. Approx. dimensions: 10" rise; 8.5" center width; 30.5" wide; 5.5" pullback. Mounts to stock Springer risers. With 4.5" center to center riser knurling distance which fits all 88-11 Springers models.

Wild1, 1-1/4 physco Chubby Chopper T-bar

#534006

Stock:No

Chrome; Steel; Approx. dimensions: 4.5" rise; 34.5" wide; 11" center; 12.5" pullback. With 4.5" center to center riser knurling distance which fits all 88-11 Softail Springers.
With fluid smooth bends. Designed for best hand and wrist placement for optimum riding position.

Wild1, 1-1/4" Chubby FLSTS Springer handlebar. Chrome

#534012

Stock:No

Clutch cable, 1 1/4" clamp, billet alu, show chrome finish

Wild1, cable guide

#534041

Stock:No

Zinc plated. 4-piece set. Used as filler to make 1" handlebars fit larger 1-1/4" diameter risers with 2 separate top clamps.
Riser sleeves / adapter sleeves / riser shims / handlebar shims / riser fillers

Wild1, riser reducer sleeve set. 4-pc set

#534088

Stock:No

Chrome; Steel; Approx. dimensions: 4.5" rise; 34.5" wide; 10.25" center; 12.5" pullback

Wild 1, 1-1/4" Chubby FLSTC/FLSTF handlebar. Chrome

#534011

Stock:Yes

Once installed you can adjust the height of the motorcycle and lower it to a maximum of 2 inches.
No permanent modifications necessary.

Wild1, Softail lowering kit. Adjustable

#534046

Stock:No

Throttle, idle & brake line, 1 1/4" clamp, billet alu, black

Wild1, cable guide

#534143

Stock:No

Chrome; Steel; Approx. dimensions: 10" rise x 36" wide x 11" pullback x 14" center width x 40° wrist angle.
Compatible with models with 1" diameter riser area only.
Custom designed for FLH, FLHX, FLHT & FLHTC Touring models with Batwing fairing (excl. FLTR), with or without e-throttle, to enhance riding comfort. Depending on installation rotation in the risers a 1 to 2.5" higher end rise and 1.5" to 2.5" more pullback can be expected when compared to stock bars. The grips are positioned behind the fairing. Bars are dimpled and drilled for internal wiring and have smooth inside corners to prevent wiring damage and ease in wiring pull-through.

Wild1, 1-1/4" Chubby Bagger Ape. Chrome, 10" rise

#534146

Stock:No

Chrome; Steel; These beefy 1-1/4" diameter Apes come knurled and pre-drilled for internal wiring. Riders arms and wrists are in the optimum angles for comfort and control. Works with 1" diameter risers and with or without e-throttle. Approx. dimensions: 14" end rise x 36.5" wide x 10" center x 12.5" pullback

Wild1, 1-1/4" Chubby Apehangers. Chrome, 14" rise

#534021

Stock:No

Chrome; Steel; Large pullback bars with smooth fluid bends. Great on stock 88-11 and custom Springers. Optimum hand and wrist placement provide maximum leverage, comfort and control. With 4.5" center to center riser knurling distance which fits all Softail Springers models. Approx. dimensions: 3.5" end rise; 36.5" wide; 10" center; 14.75" pullback

Wild 1, 1-1/4" Chubby Beach Bar. Chrome

#534028

Stock:No

Satin black powder coated; Steel; Super wide and low for a cool custom look. With 4.5" center to center riser knurling distance which fits all Softail Springers models. Approx. dimensions: 2" rise; 36.5" wide; center 10"; 8.5" pullback. Mounts to stock Springer risers. With 4.5" center to center riser knurling distance which fits all 88-11 Springers models.

Wild1, Chubby Knuckle bar for Springer 1-1/4". Black

#534106

Stock:No

Satin black powder coated; Steel; Approx. dimensions: 12.5" end rise x 36.5" wide x 11" center x 12" pullback. With 4.5" center to center riser knurling distance which fits all 88-11 Springers models.

Wild1, 1-1/4 Chubby 12.5" ape

#534110

Stock:No

Chrome; Steel; Approx. dimensions: 10" rise x 34.5" wide x 13" pullback x 14" center width x 40° wrist angle.
Compatible with models with 1" diameter riser area only.
Custom designed for FLH, FLHX, FLHT & FLHTC Touring models with Batwing fairing (excl. FLTR), with or without e-throttle, to enhance riding comfort. Depending on installation rotation in the risers a 1 to 2.5" higher end rise and 1.5" to 2.5" more pullback can be expected when compared to stock bars. The grips are positioned behind the fairing. Bars are dimpled and drilled for internal wiring and have smooth inside corners to prevent wiring damage and ease in wiring pull-through.

Wild1, 1-1/4" Chubby Bagger bar. Chrome

#534015

Stock:No

Chrome; Steel; Approx. dimensions: 16" end rise x 36.5" wide x 11" center x 12.5" pullback. With 4.5" center to center riser knurling distance which fits all 88-11 Springers models.

Wild1, 1-1/4 Chubby 16" ape

#534024

Stock:No

Satin black powder coated; Steel; Approx. dimensions: 12" rise x 33 1/2" wide x 10" outside base width x 8" pullback

Wild 1, 1-1/4" Chubby Outlawz Apes. Black, 12" rise

#534129

Stock:No

Chrome; Steel; Approx. dimensions: 12" rise x 33 1/2" wide x 10" outside base width x 8" pullback

Wild 1, 1-1/4" Chubby Outlawz Apes. Chrome, 12" rise

#534134

Stock:No

Satin black powder coated; Steel; Approx. dimensions: 10" rise; 6.5" end rise; 30.5" wide; 8" pullback, 25° wrist angle

Wild1, 1.25" Chubby pullback drag bar. 10" rise

#534083

Stock:No

Chrome; Steel; Approx. dimensions: 12.5" rise x 36" wide x 11" pullback x 14" center width x 40° wrist angle.
Compatible with models with 1" diameter riser area only.
Custom designed for FLH, FLHX, FLHT & FLHTC Touring models with Batwing fairing (excl. FLTR), with or without e-throttle, to enhance riding comfort. Depending on installation rotation in the risers a 1 to 2.5" higher end rise and 1.5" to 2.5" more pullback can be expected when compared to stock bars. The grips are positioned behind the fairing. Bars are dimpled and drilled for internal wiring and have smooth inside corners to prevent wiring damage and ease in wiring pull-through.

Wild1, 1-1/4" Chubby Bagger Ape. Chrome, 12.5" rise

#534078

Stock:No

For use with 1" (25.4mm) diameter handlebar.
1-1/4" (32mm) outside diameter.
Billet aluminum lightweight construction.
Can be used with stock, most aftermarket and Wild 1 billet top clamps with 3.5" center to center riser spacing.
1/2" x 13 threaded.

Wild1, Chubby risers. Straight. 3.5" rise. Black

#534118

Stock:No

Chrome; Steel; Approx. dimensions: 14" rise x 33 1/2" wide x 10" outside base width x 8" pullback

Wild 1, 1-1/4" Chubby Outlawz Apes. Chrome, 14" rise

#534136

Stock:No