Search

Menu

shop categories

HomeBrandsFind a dealercatalogsNewsContact
Become a dealer
Parts • Accessories • Lifestyle • Since 1982
Become a dealer
Home
Brands
Find a dealer
catalogs
News
Contact
  1. Home
  2. Products

Categories

5

Brand name

200+

Segment

2

Material

3

Can bus

1

Voltage

1

Application

1

Width

1

Length

1

9 of 9 search results

Filter

Categories

5

Brand name

200

Segment

2

Material

3

Can bus

1

Voltage

1

Application

1

Width

1

Length

1
Sort on:

SORT ON:

Altmann
Used with 569452 Altmann AMM-P2 ignition module for single fire applications
Altmann

Altmann, single fire sensor plate

#569453

Stock:Yes

Altmann
Compatible with stock crank sensor & coil. Three control knobs allow 4 settings for each range; maximum advance, advance curves and rev-limiter in 5750, 6000, 6250 and 6500 RPM. Not compatible with stock wiring harness. Used on H-D engines to install an advanced, fully adjustable and dependable ignition system. Super simple to set-up, easier than a points ignition! Perfect for any stock to performance application and absolutely brilliant to get an engine running when converting from injection to carburetor. Adjustments can be done with engine off or running. Custom bikes require nothing else than the Atmann ignition, and the bike will run. No computer required. Suitable to provide best timing for maximum power for all engine capacities and tuning levels, including stock. Perfect idle at 900RPM or even at 350RPM, what ever your preference. Complete with instruction manual. Dimensions are 6x7x3cm, smaller than a pack of cigarettes. 

Note: Mikuni HSR carbs are a very tight fit between M8 heads, Keihin carbs will not fit. 
Note: Manifolds are made from reinforced polyamide and require adequate support.
Altmann

Altmann, AMM-P3M8 single fire ignition module

#569449

Stock:Yes

Altmann
Used to install S&S Super G/D & Ultima R1 carbs to M8 engines. 

Note: Manifolds are made from reinforced polyamide and require adequate support.
Altmann

Altmann, manifold for carbureted M8

#569450

Stock:Yes

Altmann
Used to install S&S Super E/B & Ultima R2 carburetors to M8 engines. 

Note: Manifolds are made from reinforced polyamide and require adequate support.
Altmann

Altmann, manifold for carbureted M8

#569451

Stock:Yes

Altmann
Custom, no coil mounts. Compatible with stock crank sensor & coil. Three control knobs allow 4 settings for each range; maximum advance, advance curves and rev-limiter in 5750, 6000, 6250 and 6500 RPM. On stock motorcycles the ECU unit does not need to be removed, this way the ignition will work with the stock immobilizer and the ECU will only control the stock electronic speedo. On CAN-bus (HD-LAN) models the kill switch and tachometer (RPM) will not work. Will also work on fuel injected Evo models and 08-10 Buell XB (which have a crank sensors). Used on H-D engines to install an advanced, fully adjustable and dependable ignition system. Super simple to set-up, easier than a points ignition! Perfect for any stock to performance application and absolutely brilliant to get an engine running when converting from injection to carburetor. Adjustments can be done with engine off or running. Custom bikes require nothing else than the Atmann ignition, and the bike will run. No computer required. Suitable to provide best timing for maximum power for all engine capacities and tuning levels, including stock. Perfect idle at 900RPM or even at 350RPM, what ever your preference. Complete with instruction manual. Dimensions are 6x7x3cm, smaller than a pack of cigarettes.
Altmann

Altmann. AMM-P3 ignition module, single fire

#902861

Stock:Yes

Altmann
Cam sensor interface. Requires 569453 single fire or 569454 dual fire sensor plate, sold separately. Comes with 16-stage maximum advance, advance curves and 5000-8000 RPM rev-limiter in 200 RPM steps. Perfect for kickstart. Only 2.5V required to function. Used on H-D engines to install an advanced, fully adjustable and dependable ignition system. Super simple to set-up, easier than a points ignition! Perfect for any stock to performance application and absolutely brilliant to get an engine running when converting from injection to carburetor. Adjustments can be done with engine off or running. Custom bikes require nothing else than the Atmann ignition, and the bike will run. No computer required. Suitable to provide best timing for maximum power for all engine capacities and tuning levels, including stock. Perfect idle at 900RPM or even at 350RPM, what ever your preference. Complete with instruction manual. Dimensions are 6x7x3cm, smaller than a pack of cigarettes. 

Note: A Twin Cam with a BDL nosecone (BDL 515186 for gear driven cams only) will enable you to kickstart a Twin Cam. 
Note: Distributor models require a distributor that allows a H-D style electronic sensor plate & pick-up (like S&S, Mallory).
Altmann

Altmann, AMM-P2 single / dual fire ignition module

#569452

Stock:Yes

Altmann
Used with 569452 Altmann AMM-P2 ignition module for dual fire applications.
Altmann

Altmann, dual fire sensor plate

#569454

Stock:Yes

Altmann
With Softail style coil mount. Compatible with stock crank sensor & coil. Three control knobs allow 4 settings for each range; maximum advance, advance curves and rev-limiter in 5750, 6000, 6250 and 6500 RPM. On stock motorcycles the ECU unit does not need to be removed, this way the ignition will work with the stock immobilizer and the ECU will only control the stock electronic speedo. On CAN-bus (HD-LAN) models the kill switch and tachometer (RPM) will not work. Will also work on fuel injected Evo models and 08-10 Buell XB (which have a crank sensors). Used on H-D engines to install an advanced, fully adjustable and dependable ignition system. Super simple to set-up, easier than a points ignition! Perfect for any stock to performance application and absolutely brilliant to get an engine running when converting from injection to carburetor. Adjustments can be done with engine off or running. Custom bikes require nothing else than the Atmann ignition, and the bike will run. No computer required. Suitable to provide best timing for maximum power for all engine capacities and tuning levels, including stock. Perfect idle at 900RPM or even at 350RPM, what ever your preference. Complete with instruction manual. Dimensions are 6x7x3cm, smaller than a pack of cigarettes.
Altmann

Altmann, AMM-P3 single fire ignition module

#902862

Stock:Yes

Altmann
With Dyna style coil mount. Compatible with stock crank sensor & coil. Three control knobs allow 4 settings for each range; maximum advance, advance curves and rev-limiter in 5750, 6000, 6250 and 6500 RPM. On stock motorcycles the ECU unit does not need to be removed, this way the ignition will work with the stock immobilizer and the ECU will only control the stock electronic speedo. On CAN-bus (HD-LAN) models the kill switch and tachometer (RPM) will not work. Will also work on fuel injected Evo models and 08-10 Buell XB (which have a crank sensors). Used on H-D engines to install an advanced, fully adjustable and dependable ignition system. Super simple to set-up, easier than a points ignition! Perfect for any stock to performance application and absolutely brilliant to get an engine running when converting from injection to carburetor. Adjustments can be done with engine off or running. Custom bikes require nothing else than the Atmann ignition, and the bike will run. No computer required. Suitable to provide best timing for maximum power for all engine capacities and tuning levels, including stock. Perfect idle at 900RPM or even at 350RPM, what ever your preference. Complete with instruction manual. Dimensions are 6x7x3cm, smaller than a pack of cigarettes.
Altmann

Altmann, AMM-P3 single fire ignition module

#902863

Stock:Yes

Footer

About UsGet in TouchBecome a Dealer

Motorcycle Storehouse is a trade-only distributor and does not sell retail. Products can be purchased through your local dealer.

Terms of BusinessPrivacy StatementLegal NoticeDisclaimer
FacebookInstagramLinkedin