20 of 83 search results

SORT ON:

Chrome plated brass fuel valve that allows the custom builder to attach the fuel lines directly to the gas tank, and route them to the fuel valve. The fuel valve can be remotely mounted anywhere on the bike, is equipped with 5/16" fuel hose fittings and an On/Off/Reserve setting. It can also be mounted directly to the bottom side of a custom gas tank when the tank is built. - Chrome plated brass - On/off/reserve - For in-line use; with 4 mount holes - For 5/16" (8mm) fuel hose - Dimensions: 1-1/2" (3.8cm) high x 2" (5.1cm) long x 1-3/8" (3.5cm) deep. Why a Pingel? If you need a petcock that is made without compromises, you'll want a Pingel. Pingel petcocks are world famous for their gas guzzling capabilities and if you think you don't need a high flow petcock... think again. With a regular petcock, when traveling at high speed, even with a stock engine, it can happen that your bike uses more fuel than a regular petcock can deliver. The engine sucks the float bowl dry, literally starving the engine. With High Performance Big Inch motors the problem increases. Pingel petcocks can supply the amount of fuel your engine needs to perform.
Pingel

Pingel, remote Chopper Petcock

#914566

Stock:Yes

Chromed brass. 44mm wide. Lets you install a Pingel or OEM style petcock with the 75-up style 22mm nut. Two mounting holes and comes complete with gasket, 6mm screws, copper sealing washers and hyglomar sealer. Chrome plated brass construction. Great for building or modifying tanks. The adapter plates with extra outlet can be used as a return inlet for turbo engines or an outlet for a crossover application for dual tanks.
Pingel

Pingel, 22mm petcock adapter plate. 44mm wide

#509258

Stock:Yes

Black. Used to offset the passenger floorboards outwards for a more comfortable seating position and to keep feet and clothing away from exhaust pipes, painted side covers, chrome primary cover and chrome derby cover
Pingel

Pingel passenger floorboard extenders, 1"

#914002

Stock:Yes

Mounts antenna low and points it in an angle backwards, so it will clear a Tour Pak. Mounts to rear fender support brackets. Fits models with OEM saddlebag fillers. Kit includes hardware and a polished stainless bracket.
Pingel

Pingel, antenna low mount relocation kit - CB

#914356

Stock:Yes

Chrome; 3/8 NPT threaded; 5/16 (8mm) fuel hose; right outlet. If you need a petcock that is made without compromises, you'll want a Pingel. Pingel petcocks are world famous for their gas guzzling capabilities and if you think you don't need a high flow petcock... think again. With a regular petcock, when traveling at high speed, even with a stock engine, it can happen that your bike uses more fuel than a regular petcock can deliver. The engine sucks the float bowl dry, literally starving the engine. With High Performance Big Inch motors the problem increases. Pingel petcocks can supply the amount of fuel your engine needs to perform.
Pingel

Pingel, Power-Flo petcock hex chrome

#914439

Stock:Yes

Used to offset the rider floorboards outwards for a more comfortable seating position and to keep feet and clothing away from exhaust pipes, painted side covers, chrome primary cover and chrome derby cover
Pingel

Pingel, rider floorboard extenders. 1-1/4" offset

#914568

Stock:Yes

Used to offset the passenger floorboards outwards for a more comfortable seating position and to keep feet and clothing away from exhaust pipes, painted side covers, chrome primary cover and chrome derby cover
Pingel

Pingel passenger floorboard extenders, 1"

#914569

Stock:Yes

Polished aluminum; 3/8 NPT threaded; 5/16 (8mm) fuel hose; rear outlet. Note: This petcock has a rear outlet. If you rotate the complete 'rear outlet' petcock 90 degrees, you can make the outlet point to the left or right and are still able to control the fuel valve handle. This makes a pretty universal set-up for future gas tanks where petcock location may be different. If you need a petcock that is made without compromises, you'll want a Pingel. Pingel petcocks are world famous for their gas guzzling capabilities and if you think you don't need a high flow petcock... think again. With a regular petcock, when traveling at high speed, even with a stock engine, it can happen that your bike uses more fuel than a regular petcock can deliver. The engine sucks the float bowl dry, literally starving the engine. With High Performance Big Inch motors the problem increases. Pingel petcocks can supply the amount of fuel your engine needs to perform.
Pingel

Pingel, Power-Flo petcock hex alu

#914376

Stock:Yes

Polished aluminum; 3/8 NPT threaded; 5/16 (8mm) fuel hose; left outlet. If you need a petcock that is made without compromises, you'll want a Pingel. Pingel petcocks are world famous for their gas guzzling capabilities and if you think you don't need a high flow petcock... think again. With a regular petcock, when traveling at high speed, even with a stock engine, it can happen that your bike uses more fuel than a regular petcock can deliver. The engine sucks the float bowl dry, literally starving the engine. With High Performance Big Inch motors the problem increases. Pingel petcocks can supply the amount of fuel your engine needs to perform.
Pingel

Pingel, Power-Flo petcock hex alu

#914435

Stock:Yes

Versatility in the fuel valve department for the custom builder. Mounts anywhere in the fuel line. Rotating knob with On/Off design without reserve or filter. Suitable 5/16" (8mm) inside diameter fuel hose. - Chrome plated - On/Off - No reserve - No fuel filter - For 5/16" (8mm) fuel hose - inline installation
Pingel

Pingel, inline petcock. Chrome

#914463

Stock:Yes

Polished aluminum; 3/8 NPT threaded; 5/16 (8mm) fuel hose; right outlet. If you need a petcock that is made without compromises, you'll want a Pingel. Pingel petcocks are world famous for their gas guzzling capabilities and if you think you don't need a high flow petcock... think again. With a regular petcock, when traveling at high speed, even with a stock engine, it can happen that your bike uses more fuel than a regular petcock can deliver. The engine sucks the float bowl dry, literally starving the engine. With High Performance Big Inch motors the problem increases. Pingel petcocks can supply the amount of fuel your engine needs to perform.
Pingel

Pingel, Power-Flo petcock hex alu

#914438

Stock:Yes

Polished. Used to offset the rider floorboards outwards for a more comfortable seating position and to keep feet and clothing away from exhaust pipes, painted side covers, chrome primary cover and chrome derby cover
Pingel

Pingel, rider floorboard extenders. 1-1/4" offset

#914361

Stock:Yes

Stock replacement 40 micron bronze fuel filter element, complete with o-ring, for 914456, 914457, 914458, 914459 and 914460 Pingel high-flow fuel filters.
Pingel

Pingel, replacement bronze filter element

#914461

Stock:Yes

For Delphi fuel injection to carb conversion. Polished stainless billet. When converting your fuel injected bike to carburetor you can use these adapter kits to make the fuel fittings on your gas tank compatible with 22mm Pingel petcocks. Comes with adapter fitting for petcock and one plug. Note: Due to the close-contact thread design of these adapter plugs a stock replacement petcock may not fit. A Pingel petcock will fit.
Pingel

Pingel, gas tank EFI to carb adapter & plug kit. Polished

#914001

Stock:Yes

Features a 2-piece billet aluminum body for 1" handlebars. Switch is water resistant and built with stainless components. Comes with 50" (127cm) red tether cord with a clip. A tether switch, also known as kill switch, is an emergency cut-off switch. Used to switch-off the vehicle engine when the rider is thrown-off. Used, often mandatory, during racing or off-roading events. Note: see 914481 for replacement red cord with clip, see 914482 for optional black cord with wristband.
Pingel

Pingel, kill switch for battery ignition (runs closed)

#914479

Stock:Yes

Polished aluminum; 1/4 NPT threaded; 5/16 (8mm) fuel hose; right outlet. If you need a petcock that is made without compromises, you'll want a Pingel. Pingel petcocks are world famous for their gas guzzling capabilities and if you think you don't need a high flow petcock... think again. With a regular petcock, when traveling at high speed, even with a stock engine, it can happen that your bike uses more fuel than a regular petcock can deliver. The engine sucks the float bowl dry, literally starving the engine. With High Performance Big Inch motors the problem increases. Pingel petcocks can supply the amount of fuel your engine needs to perform.
Pingel

Pingel, Power-Flo petcock hex alu

#914437

Stock:Yes

Some riders think the heel shifter is unnecessary. When the heel shifter lever is removed this cover is used to fill the void. It keeps the shifter shaft in perfect alignment to prevent premature wear.
Pingel

Pingel, heel shift lever eliminator. Chrome

#914570

Stock:No

Chrome; Used to install early 3/8 NPT threaded petcocks to late 22mm threaded fuel tanks Note: It is advised to use PTFE tape for a perfect seal
Pingel

Pingel, adapter nut, 3/8 NPT to 22mm tanks

#509255

Stock:Yes

Chrome; 3/8 NPT threaded; 5/16 (8mm) fuel hose; rear outlet. Note: This petcock has a rear outlet. If you rotate the complete 'rear outlet' petcock 90 degrees, you can make the outlet point to the left or right and are still able to control the fuel valve handle. This makes a pretty universal set-up for future gas tanks where petcock location may be different. If you need a petcock that is made without compromises, you'll want a Pingel. Pingel petcocks are world famous for their gas guzzling capabilities and if you think you don't need a high flow petcock... think again. With a regular petcock, when traveling at high speed, even with a stock engine, it can happen that your bike uses more fuel than a regular petcock can deliver. The engine sucks the float bowl dry, literally starving the engine. With High Performance Big Inch motors the problem increases. Pingel petcocks can supply the amount of fuel your engine needs to perform.
Pingel

Pingel, Power-Flo petcock hex chrome

#508115

Stock:No

Chromed brass. 34mm wide. Lets you install a Pingel or OEM style petcock with the 75-up style 22mm nut. Two mounting holes and comes complete with gasket, 6mm screws, copper sealing washers and hyglomar sealer. Chrome plated brass construction. Great for building or modifying tanks. The adapter plates with extra outlet can be used as a return inlet for turbo engines or an outlet for a crossover application for dual tanks.
Pingel

Pingel, 22mm petcock adapter plate. 34mm wide

#509256

Stock:Yes