Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 10201 search results

Sort on:

Sort on:

Matte black powder coated aluminum. OEM style replacement camshaft cover.
OEM replacement reference 25700467 (Gloss black), 25700702 (Black wrinkle)

M8 cam cover. Matte black

#599194

Stock:Yes

Black. OEM style replacement.
OEM replacement reference 43027-08

Brake caliper front left

#709145

Stock:Yes

Direct OEM replacement manifold for the EFI (Electronic fuel Injected) XL Sportster models. Compatible with the stock throttle body.
OEM replacement reference 27707-07.
Note: For the replacement seal between manifold and throttle body see 938930.

MCS, EFI Intake manifold XL Sportster

#709147

Stock:No

Induction module gasket. For GEN2 M8 models with oval intake ports.
OEM replacement reference 27300198

O-ring, throttle body to manifold

#938929

Stock:Yes

Gloss black oil tank dipstick with a white face plate.
Dipstick = 13cm below bottom rubber of plug.
Scale runs from 10 to 177° Celsius.
Just one look at the fill plug and know if your oil is okay.
OEM replacement reference 62635-79T

Oil tank dipstick with temperature gauge. Black w/white face

#700658

Stock:Yes

Steel with a chrome plated finish. For use with traditional H-D male mount foot pegs.

MCS, adjustable highway bar. Chrome

#998323

Stock:Yes

Natural cast finish.
OEM style reproduction replacement aluminum inner primary cover with OEM style cast finish.
Complete with pre-installed mainshaft support bearing and inner chain adjuster detent plate.
Complete as shown.
OEM replacement reference 60617-65A.
Note: Sand cast for strength.
Note: This cast inner primary cover is slightly larger than die-cast replacements. Installer can machine or polish down the edges for a perfect match.
Installation note: Use with shorter front chain oiler. Cover is cast and thicker than stock, so check clearance between cover and frame during installation.

Inner primary cover. Cast

#700798

Stock:No

Designed for longer frames with an extended top tube. 2.5 gallon (9.5 liter) flat bottom fuel tank. Takes an 82-up screw-in style gas cap and comes with a 5/8"-18 threaded petcock fitting, on the right rear side. Approx. dimensions: 23-1/2" (59.7cm) long x 9-1/2" (24.1cm) wide x 4" (10.2cm) high. Mount holes are 9-1/2" (24.1cm) center to center.

Note: It is advised to pressure test, seal and test fit all tanks before tanks are painted and installed. Some tanks are painted, but this coat is applied for rust prevention during storage only. Dimensions are approximate and for reference only.

'Stretch' 2.5 gallon chopper gas tank

#591060

Stock:Yes

Solo seat luggage rack, 7". Black

#955858

Stock:No

Solo seat luggage rack, 7". Black

#955860

Stock:No

OEM replacement reference 62700182

Oil line, cyl. head oil return

#569029

Stock:Yes

Black. Without license plate bracket.
Replaces the stock turn signal bar and allows the license plate to be mounted below the taillight, to emphasize the low-down look of your bagger. The extra narrow turn signal bar has built-in license plate illumination, a special trim will cover the mounting holes of the stock license plate mounting holes for the finishing touch. Incl. turn signal bar, amber turn signals but does not include the license plate holder.
OEM replacement reference 53702-04A.
Note: 99-E03 models will require the separate purchase of MCS 514106 taillight socket.
Note: See 501122 for Bullet turn signal bar with license plate bracket.

Bullet turn signal bar, without license plate relocation kit

#708976

Stock:Yes

Aluminum reproduction style mount bracket used to install the OEM Heritage windshield. Complete with mounting hardware.
OEM replacement reference 57062-00A (right), 57063-00A (left)

Windshield mounting bracket FLST/C. Black

#701442

Stock:Yes

Black. OEM style replacement. Right side will fit dual disc models only.
OEM replacement reference 44023-08

Brake caliper front right

#709144

Stock:Yes

Cam drive sprocket (installs on the cam), stock replacement roller chain drive sprocket for 07-17 Twin Cam engines. OEM replacement reference 25728-06.
Note: Also used for 99-06 Twin Cam when converting from 99-06 to 06-17 style hydraulic cam chain tensioners.

MCS, cam driven gear. 34T

#709146

Stock:Yes

Retains cam follower (shifter plunger) on gear shifter cam assembly. OEM replacement reference 34065-52

MCS, retainer shifter cam follower

#709066

Stock:Yes

Black with highlighted fins. This is a quality 4.25" bolt-on big bore cylinder kit for 107" M8 models with stock 3.937" bore x 4.375" stroke. Kit can be used with a 4.25" Wiseco big bore piston & ring kit. Cylinders include dowel pins and are marked for correct front/rear installation. Capacity will increase from stock 107" (106.52" / 1746cc) to a hefty 124" (124.13 / 2034cc) but still installs without crankcase machining. Flywheel re-balancing is not required. Compression ratio is 1:11 and is compatible with the stock camshaft. Includes installation instructions.
Note: Order 576555 Wiseco 4.25" bore conversion piston & ring kit & 576556 Wiseco gasket kit separately.

107" to 124" 4.25" big bore conversion cylinders for M8

#709141

Stock:No

Solo seat luggage rack, 7". Black

#955869

Stock:No

Black painted steel construction. The Minilift is a dependable and sturdy mini-scissor style motorcycle lift, capable of lifting even the largest H-D Touring models with ease. Perfect for maintenance work on front or rear wheel. Includes two frame support brackets that are rubber coated to help prevent paint damage.
- Max weight: 500kg
- Weight of lift: 14kg
- Min height: 9.5cm
- Max. height: 40.5 cm
- Max length of plateau: 15cm
- Max width of plateau: 45cm
- With 2 frame support brackets
- CE approval
- 5 year MCS warranty

MCS, 'Minilift' motorcycle lift

#701017

Stock:No

ECE & DOT approved.
With a switchable white/amber (orange) colored halo-ring.
Economical high/low beam LED conversion head lamp unit to replace the stock H4 unit.
LEDs are an improvement at all levels when compared to H4 lighting and offer more effective and whiter light at 6000K, much better reliability and less amperage draw.
- White / amber switchable halo-ring/position light
- Unit comes complete with wiring with a 3-prong plug that is identical to a standard H4 light bulb, allowing a plug & play conversion
- Compatible with left side (UK) & right side (EU) riding
- 176mm (6.95") diameter
- 97.5mm (3.84") deep
- 6500K color temperature
- 12-Volt DC.
- Passing beam 20W
- Driving beam 35W
- Halo ring/position light 108 LEDs 1.6W

NOTE: Not available for sale in Germany

Bright, 7" LED headlamp. Chrome

#708756

Stock:No