20 of 653 search results

SORT ON:

Raw machined aluminum finish. Allows you to mount any Kraus gauge bezel in a variety of different ways. Whether you use the 984606 Universal T-Bar Clamp Mount or 984620 Isolated Riser Top Gauge Mount, you can place your gauges exactly where you can see them. Compatible with: - 984604 Kraus RG Billet Gauge Bezel - 984619 Kraus Lowrider S Gauge Bucket - 984618 Softail Digital Gauge Mount
Kraus
New

Kraus, 3" (76mm) Billet Gauge Extension. Raw machined

#707715

Stock:Yes

Raw machined aluminum finish. Allows you to relocate the stock gauge to a more visible and ergonomic position. Encases your stock Harley gauges and mounts in a variety of different ways. Whether you use the Kraus 984606 Universal T-Bar Clamp Mount or 984620 Isolated Riser Top Mount, you can place your gauge exactly where you want it. - All billet aluminum anodized construction - Light and compact
Kraus
New

Kraus, Lowrider S Gauge Bucket. Raw machined

#707708

Stock:Yes

Allows you to mount a Kraus Billet Gauge Bezel directly to the top of your Isolated Risers. Mounts directly to the top clamp of the Kraus Isolated Risers. This top plate bezel mount can be installed with the mount pointing 'up' or 'down' for a higher or lower gauge mount position.
Kraus
New

Kraus, Isolated riser new style top gauge mount. Raw

#707711

Stock:Yes

Black face with black bezel. 60mm diameter ABE approved 'multimeter' instrument with more features than you would think at first glance. With 8 color backlight display setting. Features include: - Speedometer: 0 to 160 km/h / mph. Display per: 20 km/h / mph (large grid), 10 km/h / mph (small grid) - Over speed warning light: 30 to 160 km/h (19 to 100 mph), per 1 km/h (mph) - Max. speed record: 0 to 160 km/h / mph. per 1 km/h / mph. Manually resets to zero - Odometer setting range: 0 to 99,999 km (miles), per 1km / mile - Trip odometer A/B display range: 0.0 to 9,999.9 km / mile. Manually resets to zero. Per 0.1km / mile - Tire circumference adjustment range: 300~2,500 mm. Per 1mm - Sensitive point setting range: 1 to 20 P. Per 1 P - Fuel gauge display range: 10 levels (100%), per 1 level (10%) - Fuel gauge setting range: 100 Ω, 250 Ω, 270 Ω, 390 Ω. Resistance (Ω) 510 Ω, 1200 Ω, Sw, Custom (learning mode), OFF - Low fuel level warning setting range: 0~30%, when the setting value. Warning light will light up. Per 10% - Clock setting range: 24H / 12H - Volt meter: DC 8.0 to 18.0 V, per 0.1 V - Low voltage warning light: DC 8.0~13.0 V. Per 0.1V - Composite warning light setting range: low fuel (LFUEL), low voltage (VOLT) and overheating (temperature): Lit (L), Slow flashing (S), Fast flashing (F), OUT OF - Backlight brightness 5 levels: 1/5 (darkest) to 5/5 (brightest). Per 20% - Backlight color: White, red, orange, yellow, green, blue, light blue, violet loop switch - Indicator colors: high beam (blue), turn signal (green), composite warning (red), speeding warning (red), motor oil (red), neutral (green) and check engine (amber) - Meter diameter 60mm - ABE approved
Koso
New

KOSO, D60 TNT-05 HD speedometer

#701738

Stock:Yes

Silver anodized. CNC machined aluminum bracket with hardware. Offers 3" (76.2mm) extension (hole to hole length). Compatible with Vity's Design adjustable gauge (instrument/cup) holders for Vity's adjustable risers. Used to further increase instrument mount angle and position options.
Vity's Design
New

Vity's Design, Extended Bracket Gauge. Silver

#995777

Stock:No

Gold anodized. Compatible with Vity's Design adjustable risers only. Used to replace the stock dual plastic instrument holder for high quality CNC machined billet aluminum holder that is a perfect style match with Vity's adjustable risers. The gauge holder offers infinite angle adjustments to optimize your view on the gauges and can be installed above the riser clamp, or when rotating 180°, below the riser clamp. Note: Instruments not included, designed to take OEM instruments.
Vity's Design
New

Vity's Design, adjustable dual gauge holder. Gold

#995769

Stock:Yes

Gloss black anodized. Compatible with Vity's Design adjustable risers only. Used to replace the stock dual plastic instrument holder for high quality CNC machined billet aluminum holder that is a perfect style match with Vity's adjustable risers. The gauge holder offers infinite angle adjustments to optimize your view on the gauges and can be installed above the riser clamp, or when rotating 180°, below the riser clamp.
Vity's Design
New

Vity's Design, adjustable dual gauge holder. Black

#995767

Stock:Yes

Silver anodized. Compatible with Vity's Design adjustable risers only. Used to replace the stock dual plastic instrument holder for high quality CNC machined billet aluminum holder that is a perfect style match with Vity's adjustable risers. The gauge holder offers infinite angle adjustments to optimize your view on the gauges and can be installed above the riser clamp, or when rotating 180°, below the riser clamp. Note: Instruments not included, designed to take OEM instruments.
Vity's Design
New

Vity's Design, adjustable dual gauge holder. Silver

#995768

Stock:Yes

Gold anodized. CNC machined aluminum bracket with hardware. Offers 3" (76.2mm) extension (hole to hole length). Compatible with Vity's Design adjustable gauge (instrument/cup) holders for Vity's adjustable risers. Used to further increase instrument mount angle and position options.
Vity's Design
New

Vity's Design, Extended Bracket Gauge. Gold

#995778

Stock:Yes

Black with Black Bezel. On this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed & all other functions are shown digital in red LED's. When switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. The digital display has two lines. The top line shows the gear and speed/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. Note: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A / 936578 Breakout Box B for universal applications. - Dimensions: 80mm diameter x just 22mm deep - 11 indicator lights: Immobilizer / alarm (Plug & Ride only), Reserve, Oil temperature / water temperature, engine control / MIL / ABS / ASR (Plug & Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light - Compatible with CAN-bus vehicles - White illuminated pointer / needle - Shift light adjustable 0-20.000 RPM Digital display: - Gear indicator - Speed 999 [km/h/mph] - Trip A 999.9 [km/mi] - Trip B 999.9 [km/mi] - Odometer 999999 [km/mi] - Oil temperature 0-200 [°C / °F] - Water temperature 0-200 [°C/°F] - Air temperature -20 - 100 [°C/°F] - Oil pressure 0 - 10.0 [bar/psi] - Operating hours counter 9999 [h] - Travel time [hour/minutes/seconds] - Clock - Time 0-100 km/h - 0 to 99.99 s - Acceleration 0 - 2.00 [G] - Average speed 999 [km/h/mph] - Maximum speed 999 [km/h/mph] - Maximum positive acceleration 0 - 2.00 [G] - Maximum negative acceleration 0 - 2.00 [G] - Maximum RPM digital 20.000 RPM - On-board voltage 9V - 18V - Fuel gauge 0% - 100% Adjustable warning messages: - Oil temperature - Water temperature - On-board voltage - Air temperature - Oil pressure - Tank capacity - Service interval - Speed warning (gear shift flash) Chromeclassic 2 includes: - Instrument with 75 cm connection cable & plug connection - Cable fuse - Speedometer sensor with 150 cm connection cable & two magnets - Mini push button - Stainless steel mounting screws - QR code for mounting and operating instruction
Motogadget
New

Motogadget, Chronoclassic 2 'Tacho Face'. 10.000RPM. Black B

#994299

Stock:Yes

Black with Polished Bezel. On this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed & all other functions are shown digital in red LED's. When switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. The digital display has two lines. The top line shows the gear and speed/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. Note: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A / 936578 Breakout Box B for universal applications. - Dimensions: 80mm diameter x just 22mm deep - 11 indicator lights: Immobilizer / alarm (Plug & Ride only), Reserve, Oil temperature / water temperature, engine control / MIL / ABS / ASR (Plug & Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light - Compatible with CAN-bus vehicles - White illuminated pointer / needle - Shift light adjustable 0-20.000 RPM Digital display: - Gear indicator - Speed 999 [km/h/mph] - Trip A 999.9 [km/mi] - Trip B 999.9 [km/mi] - Odometer 999999 [km/mi] - Oil temperature 0-200 [°C / °F] - Water temperature 0-200 [°C/°F] - Air temperature -20 - 100 [°C/°F] - Oil pressure 0 - 10.0 [bar/psi] - Operating hours counter 9999 [h] - Travel time [hour/minutes/seconds] - Clock - Time 0-100 km/h - 0 to 99.99 s - Acceleration 0 - 2.00 [G] - Average speed 999 [km/h/mph] - Maximum speed 999 [km/h/mph] - Maximum positive acceleration 0 - 2.00 [G] - Maximum negative acceleration 0 - 2.00 [G] - Maximum RPM digital 20.000 RPM - On-board voltage 9V - 18V - Fuel gauge 0% - 100% Adjustable warning messages: - Oil temperature - Water temperature - On-board voltage - Air temperature - Oil pressure - Tank capacity - Service interval - Speed warning (gear shift flash) Chromeclassic 2 includes: - Instrument with 75 cm connection cable & plug connection - Cable fuse - Speedometer sensor with 150 cm connection cable & two magnets - Mini push button - Stainless steel mounting screws - QR code for mounting and operating instruction
Motogadget
New

Motogadget, Chronoclassic 2 'Tacho Face'. 10.000 RPM. Pol. B

#994304

Stock:Yes

Black with Polished Bezel. On this Chronoclassic 'Tacho Face' the large classic needle indicates RPM. Speed & all other functions are shown digital in red LED's. When switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. The digital display has two lines. The top line shows the gear and speed/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. Note: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A / 936578 Breakout Box B for universal applications. - Dimensions: 80mm diameter x just 22mm deep - 11 indicator lights: Immobilizer / alarm (Plug & Ride only), Reserve, Oil temperature / water temperature, engine control / MIL / ABS / ASR (Plug & Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light - Compatible with CAN-bus vehicles - White illuminated pointer / needle - Shift light adjustable 0-20.000 RPM Digital display: - Gear indicator - Speed 999 [km/h/mph] - Trip A 999.9 [km/mi] - Trip B 999.9 [km/mi] - Odometer 999999 [km/mi] - Oil temperature 0-200 [°C / °F] - Water temperature 0-200 [°C/°F] - Air temperature -20 - 100 [°C/°F] - Oil pressure 0 - 10.0 [bar/psi] - Operating hours counter 9999 [h] - Travel time [hour/minutes/seconds] - Clock - Time 0-100 km/h - 0 to 99.99 s - Acceleration 0 - 2.00 [G] - Average speed 999 [km/h/mph] - Maximum speed 999 [km/h/mph] - Maximum positive acceleration 0 - 2.00 [G] - Maximum negative acceleration 0 - 2.00 [G] - Maximum RPM digital 20.000 RPM - On-board voltage 9V - 18V - Fuel gauge 0% - 100% Adjustable warning messages: - Oil temperature - Water temperature - On-board voltage - Air temperature - Oil pressure - Tank capacity - Service interval - Speed warning (gear shift flash) Chromeclassic 2 includes: - Instrument with 75 cm connection cable & plug connection - Cable fuse - Speedometer sensor with 150 cm connection cable & two magnets - Mini push button - Stainless steel mounting screws - QR code for mounting and operating instruction
Motogadget
New

Motogadget, Chronoclassic 2 'Tacho Face'. 14.000 RPM. Pol. B

#994306

Stock:Yes

Black with Polished Bezel. On this Chronoclassic 'Speedo Face' the large classic needle indicates speed. RPM (up to 20.000 RPM) and all other functions are shown digital in red LED's. When switched off only the black face is visible, for a perfect classic look. The digital display, an in-house development by Motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shines through the dial when activated. The digital display has two lines. The top line shows the gear and speed/RPM and the bottom line shows the display values, which can be changed at the touch of a button. The illuminated pointer, perfectly illuminated backlight and an automatic brightness adjustment of the matrix LEDs for optimum readability in direct sunlight all the way to in the dark. Note: For non-fuel injected motorcycles a Motoscope Breakout Box is required to run the indicator lights. Available as 930311 H-D J1850 and 936577 Breakout Box A / 936578 Breakout Box B for universal applications. - Dimensions: 80mm diameter x just 22mm deep - 11 indicator lights: Immobilizer / alarm (Plug & Ride only), Reserve, Oil temperature / water temperature, engine control / MIL / ABS / ASR (Plug & Ride only), oil pressure, turn signal left, turn signal right, high beam, neutral, universal warning light - Compatible with CAN-bus vehicles - White illuminated pointer / needle - Shift light adjustable 0-20.000 RPM Digital display: - Gear indicator - Speed 999 [km/h/mph] - Trip A 999.9 [km/mi] - Trip B 999.9 [km/mi] - Odometer 999999 [km/mi] - Oil temperature 0-200 [°C / °F] - Water temperature 0-200 [°C/°F] - Air temperature -20 - 100 [°C/°F] - Oil pressure 0 - 10.0 [bar/psi] - Operating hours counter 9999 [h] - Travel time [hour/minutes/seconds] - Clock - Time 0-100 km/h - 0 to 99.99 s - Acceleration 0 - 2.00 [G] - Average speed 999 [km/h/mph] - Maximum speed 999 [km/h/mph] - Maximum positive acceleration 0 - 2.00 [G] - Maximum negative acceleration 0 - 2.00 [G] - Maximum RPM digital 20.000 RPM - On-board voltage 9V - 18V - Fuel gauge 0% - 100% Adjustable warning messages: - Oil temperature - Water temperature - On-board voltage - Air temperature - Oil pressure - Tank capacity - Service interval - Speed warning (gear shift flash) Chromeclassic 2 includes: - Instrument with 75 cm connection cable & plug connection - Cable fuse - Speedometer sensor with 150 cm connection cable & two magnets - Mini push button - Stainless steel mounting screws - QR code for mounting and operating instruction
Motogadget
New

Motogadget, Chronoclassic 2 'Speedo Face'. Polished bezel

#994308

Stock:Yes

ABE approved. Plug & play replacement for the OEM instruments. Plug OEM connectors into instruments and install into the fairing. Ready! Offers a single display color option (Blue) and 5 intensity levels for the digits and graphics in each individual instrument. Once the ignition is off, all instruments are completely black for a great custom look. This kit includes a 4" speedometer, a 4" tachometer with gear indicator, a 2" oil temperature gauge, and a 2" fuel gauge. - Display color: Blue - 12V DC - Speedometer: 0 to 299 km/h (0 to 199 mph) - Display refresh rate: <0.5 seconds - Overspeed warning setting: 30 to 299 km/h (19 to 199 MPH). When the set value is reached, the warning lamp lights up - Maximum speed record: 0 to 299 km/h (mph) - Odometer display range: 0 to 999,999 km (miles) displays per 0.1 km (miles) - Tripmeter A/B: 0 to 9,999.9 km (miles) - Tire circumference: Adjustment range: 50 - 210 %. Sets per 1% - Oil change interval/maintenance: off - 300 - 10,000 miles or 500 - 16,000km adjustable. Adjustable per 1 miles/km. Counts down as the number of miles/km increase. From 0 km/miles the warning light flashes and the device counts down to maximum minus 999 km/miles. Manual reset - Gear indicator: Off, N, P, R, 1, 2, 3, 4, 5, 6 - Tachometer: 0 to 9,990 rpm. Displays per 10 rpm - Shift light: : 2,000~8,000 rpm, per 100 rpm adjustable. Light turns on when set RPM is reached - Engine temperature: -40 to 300 °C / -40 to 572 °F - Fuel meter setting: H-D standard / customer-specific - Fuel warning setting 1-HD Standard: Flashing LCD when > 211 Ω, Off LCD when < 187 Ω - Fuel warning setting 2-HD Customize: Flashing LCD when < 20%, Off LCD when > 30% - Fuel tank volume: OFF / 1 ~ 9.9 US gallons - Average fuel consumption: OFF / MPG (US spec) / MPG (UK spec) L/ 100 km / km/L - Fuel 'remaining distance': LCD shows 'LO RNG' and flashes as a warning when remaining range is less than 16 km (10 miles) - Clock: 12h / 24h - Oil Temperature Gauge: 0 to 400°F (32 to 248°C), displays per 1 F° (1 °C) - Maximum oil temperature record (storage): 0 to 400°F (32 to 248°C) - Air pressure gauge: Display: Display - - - if no sensor is installed, 0 – 150 PSI. Displays per: 1 PSI - Air pressure gauge calibration: Calibration range: 0 – 25 PSI +/- 1 PSI. Calibration unit: 1 PSI. Default value: 0 PSI - Volt meter range: DC 8 to 18V - Brightness digits: 5 levels - Color digits / graphics: 1 color: Red - Works from -10°C to 60°C - JIS D 0203 (S2) standard specified - Weight speedometer & tachometer: 286 gram - Weight oil temp.: 81 gram - Weight fuel gauge: 81 gram - Indicator lights: Turn signal right + left (green), Photometric detection, Oil (red), Check engine light (yellow), Cruise control (orange/green), Anti-theft device (red), Water temperature (blue), Warning light (orange/green), High beam (blue), Fog light (green), ABS (yellow)
Koso
New

KOSO, HD-06 4-piece gauge kit. Blue display

#701721

Stock:Yes

For non CAN-bus models with a handlebar mounted instrument. Multifunctional speedometer / tachometer for models with a handlebar mounted analog instrument. This gauge is plug & Play and offers much more than great looks. The high-tech backlit LCD screen features functions as speed, odometer, tripmeter, hour meter, fuel level, oil temp, shift light, 6 indicator lights and more. - Speedometer: 0 ~ 225 mph (0 ~ 360 km/h) per 1 mph or km/h - Odometer: 0 ~ 999,999 miles / km. Per 1 mile / km - Tripmeter A/B: 0 to 9,999.9 miles / km. Per 0.1 mile / km - Tachometer: 0 ~ 10,000 rpm - Shift light warning: 2,000 to 10,000 rpm. Adj. per 100 rpm on ≥ value - Tire circumference: 50 to 210%. Adj. per 1% - Engine / oil temperature meter: -40 to 419°F (-40 to 215°C). Per 1 degree - Display backlight brightness: 5 levels. 1-5 (darkest) to 5-5 (brightest) - Overspeed warning: 0 to 225 mph (0 to 360 km/h) - Fuel level: 6 levels. 1 level = 16.67% - Fuel tank volume: OFF / 1.0 to 9.9 US gallons - Clock: 12 H or 24 H format - Gear indicator: Off, N, 1, 2, 3, 4, 5, 6 - Indicator lights: Check engine / ABS / RPM shift light / Security indicator / Cruise control / Low voltage warning - Volt meter: DC 8.0 to 18.0 V. Per 0.1 Volt
Koso
New

KOSO, DL-04HD multifunctional gauge

#701735

Stock:Yes

Black anodized. CNC machined aluminum bracket with hardware. Offers 3" (76.2mm) extension (hole to hole length). Compatible with Vity's Design adjustable gauge (instrument/cup) holders for Vity's adjustable risers. Used to further increase instrument mount angle and position options.
Vity's Design
New

Vity's Design, gauge holder extension. Black

#995776

Stock:No

For CAN-bus models with a handlebar mounted instrument. Multifunctional speedometer / tachometer for models with a handlebar mounted analog instrument. This gauge is plug & Play and offers much more than great looks. The high-tech backlit LCD screen features functions as speed, odometer, tripmeter, hour meter, fuel level, oil temp, shift light, 6 indicator lights and more. - Speedometer: 0 ~ 225 mph (0 ~ 360 km/h) per 1 mph or km/h - Odometer: 0 ~ 999,999 miles / km. Per 1 mile / km - Tripmeter A/B: 0 to 9,999.9 miles / km. Per 0.1 mile / km - Tachometer: 0 ~ 10,000 rpm - Shift light warning: 2,000 to 10,000 rpm. Adj. per 100 rpm on ≥ value - Tire circumference: 50 to 210%. Adj. per 1% - Engine / oil temperature meter: -40 to 419°F (-40 to 215°C). Per 1 degree - Display backlight brightness: 5 levels. 1-5 (darkest) to 5-5 (brightest) - Overspeed warning: 0 to 225 mph (0 to 360 km/h) - Fuel level: 6 levels. 1 level = 16.67% - Fuel tank volume: OFF / 1.0 to 9.9 US gallons - Clock: 12 H or 24 H format - Gear indicator: Off, N, 1, 2, 3, 4, 5, 6 - Indicator lights: Check engine / ABS / RPM shift light / Security indicator / Cruise control / Low voltage warning - Volt meter: DC 8.0 to 18.0 V. Per 0.1 Volt
Koso
New

Koso, DL-04D Multifunctional display for HD

#701736

Stock:Yes

The LR/S Twin Gauge Bucket is a must-have accessory for motorcycle enthusiasts. This innovative product allows twin gauges to be relocated onto the handlebars, providing more adjustability and better visibility while riding. No more straining your neck or taking your eyes off the road to check your gauges. With the LR/S Twin Gauge Bucket, you can easily monitor your speed, RPM, fuel level, and other important information right at your fingertips. Machined from 6061 Billet Aluminum, this bucket is built to withstand the elements and provide long-lasting performance. Upgrade your ride and enhance your safety with the LR/S Twin Gauge Bucket. Mounts sold separately. Compatible with both the Kraus T-Bar Clamp and Isolated Riser Top Gauge Mount. Add the Kraus Gauge Bezel 3-inch extension for maximum adjustability.
Kraus
New

Kraus, Low Rider S Twin Gauge Bucket. Black

#995361

Stock:Yes

Top clamp used to place your gauges front and center without sacrificing the visibility to your LCD radio/GPS screen. Compatible with the stock round Road Glide gauge in combination with Kraus Topless Isolated Risers 704030 (8"), 704034 (10") or 704033 (12" rise). Will also fit all other Kraus Isolated risers that has the stock top clamp exchanged for this top clamp. - For 1-1/8" (28mm) handlebar clamp area - CNC machined billet aluminum - Black anodized finish. Note: When required a Plug & Play 32" (81cm) long instrument wiring extension is optional available as 984612.
Kraus
New

Kraus, LUX Riser Top Plate. Black

#704032

Stock:Yes

Customers who have purchased the early (934209 Black Ops / 934210 Gold Ops) PM Phatbar & Riser Kit, good news for gauge relocation. With this Performance Machine supplement top mount clamp, your riser kit is compatible with all gauge relocation kits designed for the PM Phatbar & Riser Kit.
Performance Machine
New

PM, Phatbar & riser gauge relocation adapter. Black Ops

#999873

Stock:Yes