Parts - Electrical

Brand name

94

Segment

5

Material

24

Voltage

3

Color

12

Can bus

2

Pins

19

Tags

3

Finish

12

Product type

15

Length

102

20 of 4777 search results

Sort on:

SORT ON:

Banjo bolt, M10 x 1.25 threaded, with incorporated hydraulic brake light switch with wiring. High polished stainless steel. 30mm under hex

Goodridge, M10 x 1.25 double banjo brake switch. SS

#708069

Stock:Yes

BCM (Body Control Module) 'Power' 2-way connector kit with terminals and wire seals.
OEM replacement reference 69201931

NAMZ, BCM 'Power' connector kit

#701708

Stock:Yes

Cycle Electric Inc. Alternator kits combine our state of the art stators with our legendary bullet proof rectifying regulators. This complete charging kit includes:
-Stator x1
-Rotor x1
-Regulator x1
-Hardware misc.

Cycle Electric Alternator kit

#998307

Stock:No

Silver anodized finish. CNC machined billet aluminum cover used when converting to a custom handlebar riser assembly. Eliminates the need to relocate your factory ignition switch when going to a custom handlebar riser assembly. Direct bolt-on design allows you to keeps the factory ignition switch & fork lock function, drastically eliminating installation time. Works perfectly with the Method 10 riser assembly or many other aftermarket riser assemblies.

Note: Style compatible with the Ness 599416/997479/997480 Method 10 riser set and Ness 599449 Method top triple tree.
Note: The stock plastic gauge nacelle must be removed.

Arlen Ness, Method ignition switch cover kit. Silver

#997481

Stock:Yes

Engine temperature sensor 'B' 2-way female connector with terminals and wire seals.
OEM replacement reference 69201299

NAMZ, Engine Temp Sensor Female Connector

#701705

Stock:Yes

For use with 4-Wire Trailers.

NAMZ, Indian Challenger Trailer Isolator Module

#701702

Stock:Yes

Fog light harness 4-way male connector with terminals and wire seals.
OEM replacement reference 69202285

NAMZ, fog light harness male connector

#701704

Stock:Yes

CAN terminating 2-way male connector with terminals and wire seals.
OEM replacement reference 69202959

NAMZ, CAN Terminating 2-Position Male Connector

#701703

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914925 (warm white) or 988566 (cold white) Dayron DRLs.

Kellermann, wiring harness for Dayron with turn signal

#988570

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914926 (warm white) or 988567 (cold white) Dayron DRLs.

Kellermann, wiring harness for Dayron without turn signal

#988569

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914925 (warm white) or 988566 (cold white) Dayron DRLs.

Kellermann, wiring harness for Dayron with turn signal

#988568

Stock:Yes

BCM 'C' 32-way connector kit with terminals in (2) gauge sizes.
OEM replacement reference 69201933

NAMZ, BCM 'C' connector kit

#701706

Stock:Yes

Used to install an OEM or aftermarket Wrap Around light bar on a Street Glide or Road Glide Touring model. Comes as a complete Plug & Play quick-disconnect wiring Tour-Pak® installation kit that fits the OEM Tour-Pak® connector. When the main harness is connected under the left side cover or under the seat (based on your year/model) this Tour-Pack harness connection will be positioned at the seat bolt on the rear fender for easy access.
Allows the Tour-Pak® to be easily removed by simply unplugging the (weather-proof) quick-disconnect connector.

NAMZ, Tour-Pack wiring installation kit

#993538

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914926 (warm white) or 988567 (cold white) Dayron DRLs.

Kellermann, wiring harness for Dayron without turn signal

#988571

Stock:Yes

For use with the 955033 Power Vision 3 module.
This module puts real time AFR data onto the ECU/ECM allowing the PV3 to pick this channel up natively from the ECU.
Use Power Core software to process this data to fine tune your calibration.

**Dynojet product not available to purchase by Dealers located in the UK**

Dynojet, Power Vision 3 autotune kit

#993555

Stock:Yes

For use with the 955035 Power Vision 3 module.
This module puts real time AFR data onto the ECU/ECM allowing the PV3 to pick this channel up natively from the ECU.
Use Power Core software to process this data to fine tune your calibration.

**Dynojet product not available to purchase by Dealers located in the UK**

Dynojet, Power Vision 3 autotune kit

#993554

Stock:Yes

Used to run a Power Vision module as a true wide band closed loop set-up. You can set air/fuel ratios and the Target Tune, with the included wide band sensors, will automatically real-time adjust to the circumstances (altitude, weather, riding style etc.) that your bike encounters but also hold onto your pre-determent air/fuel ratios that you've programmed in the fuel map.
It uses the existing closed loop, adaptive fuel control strategy in your Delphi ECM, but with changes made to the calibration to allow your ECM to use wideband sensors with a much wider AFR (10:1 to 18:1) than the stock limited narrow band sensors.
Target Tune Full Kit comes complete everything needed for installation, it includes the Target Tune module with 2 Bosch wideband AFR / Lambda sensors and appropriate wiring harness cables with stock connectors.
In order for the system to work, you must have a calibration flashed to your bike with the various edits required to make it work. At this time only a Certified Power Vision Tuning Center, or a Dynojet technical representative can make those edits.
- Closed loop fuel control
- Real time calibration
- Automatically keeps your air/fuel ratio at your optimal settings
- Target Tune can subtract 30%, and add 40% fuel to a tune
- Works with OEM ECU/ECM in combination with Power Vision
- Works with WinPV software (free for download at Dynojet)
- All the regular tuning parameters that are exposed to you in WinPV are available
- Enables Autotune
- Does not interfere with dealer diagnostic or service tools
- Includes OEM-style connectors for simple installation into factory O2 harness

**Dynojet product not available to purchase by Dealers located in the UK**

Dynojet, Target Tune kit

#993558

Stock:Yes

Used to run a Power Vision module as a true wide band closed loop set-up. You can set air/fuel ratios and the Target Tune, with the included wide band sensors, will automatically real-time adjust to the circumstances (altitude, weather, riding style etc.) that your bike encounters but also hold onto your pre-determent air/fuel ratios that you've programmed in the fuel map.
It uses the existing closed loop, adaptive fuel control strategy in your Delphi ECM, but with changes made to the calibration to allow your ECM to use wideband sensors with a much wider AFR (10:1 to 18:1) than the stock limited narrow band sensors.
Target Tune Full Kit comes complete everything needed for installation, it includes the Target Tune module with 2 Bosch wideband AFR / Lambda sensors and appropriate wiring harness cables with stock connectors.
In order for the system to work, you must have a calibration flashed to your bike with the various edits required to make it work. At this time only a Certified Power Vision Tuning Center, or a Dynojet technical representative can make those edits.
- Closed loop fuel control
- Real time calibration
- Automatically keeps your air/fuel ratio at your optimal settings
- Target Tune can subtract 30%, and add 40% fuel to a tune
- Works with OEM ECU/ECM in combination with Power Vision
- Works with WinPV software (free for download at Dynojet)
- All the regular tuning parameters that are exposed to you in WinPV are available
- Enables Autotune
- Does not interfere with dealer diagnostic or service tools
- Includes OEM-style connectors for simple installation into factory O2 harness

**Dynojet product not available to purchase by Dealers located in the UK**

Dynojet, target tune kit

#993557

Stock:Yes

OEM replacement reference 74510-70 / 74510-70A.

MCS, voltage regulator/rectifier. Black

#988953

Stock:No

12V. OEM replacement reference 74510-64.

MCS, voltage regulator/rectifier. Black

#988952

Stock:Yes