Parts - Electrical - Batteries

Brand name

24

Segment

4

Voltage

2

Material

9

Length

56

Color

6

Battery type

2

Finish

6

Tags

2

Can bus

1

Approval

1

20 of 473 search results

Sort on:

SORT ON:

9 step 12V / 12.8V 1.25A sealed battery saving charger & maintainer for AGM, GEL & STD 12V batteries from 4 – 60Ah & Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 15Ah. OptiMate 4 Quad Program tests before & after charging and can recover a ‘dead-flat’ lead-acid & lithium (LiFePO4) battery from as low as 0.5 Volts.
- Selectable, 4 charge programs: 1).12V Smart desulphation: 0.5V - 14.4V.
2). BMW CAN-bus compatible: 5V - 14.4V.
3). 12.8V Low Volt Recovery: 0.5V - 14.4V.
4). BMW CAN-bus compatible: 8.8V - 14.4V.
- Charging Amps: 1.25A (constant current)
- Indoor / Outdoor (lowest temperature: -40°F / -40°C)
- Save: Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode)
- For 4 x Lead Acid, AGM & GEL 12V batteries from 3 to 50Ah
- Input: Global (100-240V 50-60Hz), high efficiency (CEC listed)
- Weatherproof case with wall mounts
- Incl. 6ft. / 180cm AC supply lead and 6ft. / 180cm charge lead ending in SAE connector. Weatherproof battery lead, battery clip set & hanging hook
- No risk of overcharging
- Sparks suppressed
- Safe for vehicle electronics
- Safe for long-term battery maintenance
- Automatic shut-down if short-circuited or battery disconnected.

Tecmate, OptiMATE 4 Quad Program 12V battery charger

#993458

Stock:Yes

9-step 12V / 12.8V 1.25A sealed battery saving charger & maintainer for AGM, GEL & STD 12V and works with 12.8V Li-Ion made batteries with LiFe & LFP technology.
Note: Quad program – select program 1 or 3 to charge battery direct or through a live (hot) 12V socket, or program 2 or 4 to charge through BMW CAN-bus controlled 12V socket. Will require optional cable accessory to connect to socket.
- Fully automatic and safe charger / trickle charger for 24-7 use
- BMW CAN-bus compatible, automatic activation
- Smart desulphation from 0.5V, for Pb (conventional lead acid) batteries
- Low voltage recovery & BMS reset, for LFP battery
- Tests battery state of health
- Energy saving technology
- Stand-by power less than 0.5W
- Efficient 24-7 battery maintenance
- Weatherproof
- Rated for use down to -40°C / -40°F
- No risk of overcharging
- Sparks suppressed
- Safe for vehicle electronics
- Safe for long-term battery maintenance
- Automatic shut-down if short-circuited or battery disconnected
- Includes weatherproof battery lead, battery clip set & hanging hook.

Tecmate, OptiMate 4 Quad Program

#998313

Stock:Yes

12V, 30Ah, 416CCA (Cold Cranking Amps).
The technology behind Nano-Gel batteries is basically a further development in AGM battery technology. Nano-Gel batteries are known to provide a long shelf life, a high capacity, good deep cycle resistance and more power. Based on AGM technology, but smaller nano sized particles in the electrolyte ultimately allowing plates to be placed closer together, without temperature issues. Simply put, the Nano-Gel batteries offer more capacity and power in a smaller housing.
- Better resistance to vibration and heat
- Better high current delivery (starting)
- Plated copper terminals
- Higher power density
- No gassing with safety valve
- Low self discharge
- Mounts in any position
- High charge voltage at around 20% of battery capacity
- Wide 20°C to +60°C temperature range
- Strong ABS housing
- Safe. Will not spill or leak, even when damaged
- Excellent life expectancy & reliability
- Dimensions: 16.6cm long x 17.5cm high x 12.6cm deep
- OEM replacement reference 66010-97E, 66000066A, 66000212B

MCS, Nano Series sealed GEL battery. 12V, 30Ah, 416CCA

#700656

Stock:Yes

12V, 20Ah, 360CCA (Cold Cranking Amps).
The technology behind Nano-Gel batteries is basically a further development in AGM battery technology. Nano-Gel batteries are known to provide a long shelf life, a high capacity, good deep cycle resistance and more power. Based on AGM technology, but smaller nano sized particles in the electrolyte ultimately allowing plates to be placed closer together, without temperature issues. Simply put, the Nano-Gel batteries offer more capacity and power in a smaller housing.
- Better resistance to vibration and heat
- Better high current delivery (starting)
- Plated copper terminals
- Higher power density
- No gassing with safety valve
- Low self discharge
- Mounts in any position
- High charge voltage at around 20% of battery capacity
- Wide 20°C to +60°C temperature range
- Strong ABS housing
- Safe. Will not spill or leak, even when damaged
- Excellent life expectancy & reliability
- Dimensions: 17.5cm long x 15.5cm high x ,8.7cm deep
- OEM replacement reference 65991-82B, 66000209

MCS, Nano Series sealed GEL battery. 12V, 20Ah, 360cca

#700654

Stock:Yes

Bronze.
5-step 12V / 12.8V 2A sealed battery maintainer. For Lead Acid, AGM, GEL 12V batteries from 6 to 96Ah and 12.8/13.2V lithium (LiFePO4) batteries. It senses the battery condition, recharges and then keeps the battery 100% ready. The fully automatic maintenance program provides what the battery needs, never overcharges, never undercharges.
- Charging Amps: 2A (constant current)
- Charging volts: nominal: 12V & 12.8V range: 4V – 14.4V
- Indoor / Outdoor (lowest temperature: -40°F / -20°C)
- For Lead Acid, AGM & GEL 12V batteries from 3 – 96Ah
- Input: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed
- Weatherproof case with wall mounts
- Incl. 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector
- weatherproof battery lead & battery clip set
- No risk of overcharging
- Sparks suppressed
- Safe for vehicle electronics
- Safe for long-term 24-7 battery maintenance
- Automatic shut-down if short-circuited or battery disconnected

Tecmate, Optimate, 2 Duo 12V battery charger. Bronze

#998339

Stock:Yes

12V, 20Ah, 360CCA (Cold Cranking Amps).
The technology behind Nano-Gel batteries is basically a further development in AGM battery technology. Nano-Gel batteries are known to provide a long shelf life, a high capacity, good deep cycle resistance and more power. Based on AGM technology, but smaller nano sized particles in the electrolyte ultimately allowing plates to be placed closer together, without temperature issues. Simply put, the Nano-Gel batteries offer more capacity and power in a smaller housing.
- Better resistance to vibration and heat
- Better high current delivery (starting)
- Plated copper terminals
- Higher power density
- No gassing with safety valve
- Low self discharge
- Mounts in any position
- High charge voltage at around 20% of battery capacity
- Wide 20°C to +60°C temperature range
- Strong ABS housing
- Safe. Will not spill or leak, even when damaged
- Excellent life expectancy & reliability
- Dimensions: 17.5cm long x 15.5cm high x 8.7cm deep
- OEM replacement reference 65989-90A, 65989-97E, 66000065A

MCS, Nano Series sealed GEL battery. 12V, 20Ah, 360cca

#700655

Stock:Yes

12V, 14Ah, 260CCA (Cold Cranking Amps).
The technology behind Nano-Gel batteries is basically a further development in AGM battery technology. Nano-Gel batteries are known to provide a long shelf life, a high capacity, good deep cycle resistance and more power. Based on AGM technology, but smaller nano sized particles in the electrolyte ultimately allowing plates to be placed closer together, without temperature issues. Simply put, the Nano-Gel batteries offer more capacity and power in a smaller housing.
- Better resistance to vibration and heat
- Better high current delivery (starting)
- Plated copper terminals
- Higher power density
- No gassing with safety valve
- Low self discharge
- Mounts in any position
- High charge voltage at around 20% of battery capacity
- Wide 20°C to +60°C temperature range
- Strong ABS housing
- Safe. Will not spill or leak, even when damaged
- Excellent life expectancy & reliability
- Dimensions: 15cm long x 14.5cm high x 8.7cm deep
- OEM replacement reference 65958-04C, 66000363, 66000208B

MCS, Nano Series sealed GEL battery. 12V, 14Ah, 260cca

#700653

Stock:Yes

UK wall plug. 2 bank charger 12V. Allows charging / maintaining 1 or 2 batteries at once. Dimensions: 11.5cm wide x 8.5cm high x 17.5cm deep.Microprocessor controlled, 100-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program, initialization / bulk charge / absorption mode / float mode, as required. A red LED indicates a 'dead' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process, until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. Charges all flooded, sealed, maintenance free, AGM and lead acid batteries. CE approved.
Note: When using multi-bank chargers, with the batteries in the bikes, you can order 990048 quick-disconnect cable which offers 25 foot (7.5 meters) of convenience.

Battery Tender, International Plus - 1.25A charger

#990078

Stock:Yes

Nothing will fit as good as a Do It Yourself custom battery cable where all dimensions are picture-perfect.
Kits consists of:
- 4 gauge (5.19mm diameter / 19mm²) 25 foot (7.62 meters) battery cable with clear protective cover
- 20x 1/4" (6.35mm) lug
- 8x 3/8" (9.5mm) lug
- 12x 5/16" (7.94mm) lug
- 40x black heat shrink
- 12x red heat shrink tubing.

All Balls, custom 25 foot battery cable kit. Clear

#530606

Stock:Yes

'- With a translucent (see-through) clear protective cover
- 4 gauge (5.19mm diameter) wire with more than 1550 strands of individual wires making it very flexible
- Lugs are silver tinned and come with 1/4" (6.4mm) and 5/16" (7.9mm) holes

NAMZ, battery cable set. Clear. 7 inch (17.5cm)

#548111

Stock:Yes

'- With a translucent (see-through) clear protective cover
- 4 gauge (5.19mm diameter) wire with more than 1550 strands of individual wires making it very flexible
- Lugs are silver tinned and come with 1/4" (6.4mm) and 5/16" (7.9mm) holes

NAMZ, battery cable set. Clear. 19 inch (48cm)

#548117

Stock:Yes

Bulk DIY (Do It Yourself) custom battery cable, to create a battery cable where all dimensions are picture-perfect.
- With clear protective cover
- Heavy Duty 4-gauge (5.19mm diameter / 19mm²) 25 foot (7.62 meters) battery cable on roll

All Balls, 25 foot battery cable. Clear

#530631

Stock:Yes

'- With a translucent (see-through) clear protective cover
- 4 gauge (5.19mm diameter) wire with more than 1550 strands of individual wires making it very flexible
- Lugs are silver tinned and come with 1/4" (6.4mm) and 5/16" (7.9mm) holes

NAMZ, battery cable set. Clear. 6 inch (15cm)

#548110

Stock:Yes

'- With a translucent (see-through) clear protective cover
- 4 gauge (5.19mm diameter) wire with more than 1550 strands of individual wires making it very flexible
- Lugs are silver tinned and come with 1/4" (6.4mm) and 5/16" (7.9mm) holes

NAMZ, battery cable set. Clear. 15 inch (38cm)

#548115

Stock:Yes

Battery side cover, smooth. Chrome

#505435

Stock:No

3/16" (4.8mm) weather resistant foam rubber. Self adhesive PSA (Pressure-Sensitive Adhesive) on one side. For use in stock and custom applications against battery rattle. Dimensions: 3.5" (8.9cm) x 4" (10.2cm). OEM replacement reference 66417-64 (6-volt 22amp), 66415-62 (6-volt 51amp)

James, battery pad. Top & bottom

#501237

Stock:Yes

3/16" (4.8mm) weather resistant foam rubber. For use in stock and custom applications against battery rattle. Dimensions: 3.5" (8.9cm) x 4" (10.2cm).

James, battery pad. Top & bottom

#501238

Stock:Yes

2 used. 3/16" (4.8mm) weather resistant foam rubber. Self adhesive PSA (Pressure-Sensitive Adhesive) on one side. For use in stock and custom applications against battery rattle. Dimensions 1" (2.54mm) x 1" (2.54mm). OEM replacement reference 66353-65.

James, battery pad. Top cover

#501239

Stock:Yes

UK wall plug. Charges all flooded, sealed, maintenance free, AGM and lead acid batteries. Water resistant and shock/vibration resistant with a weight less than 2kg. A compact and sturdy charger, ready for portable operations or permanent mounting in a garage etc. Microprocessor controlled, 110-240V compatible. Adapts to battery needs and offers fully automatic 4-stage charging program, initialization / bulk charge / absorption mode / float mode, as required. A red LED indicates a 'dead' battery or something else when the battery is unable to take the charge. A green LED blinks during the charging process, until the battery is at least 80% charged. A constant lighting green LED indicates the battery is ready for use. CE approved.

Battery Tender, Power Tender 12V@5A High Efficiency

#501303

Stock:No

Black parkerized. Battery bolt lock plate without hardware. OEM style reproduction of 66302-29, 4417-29.

Colony, battery upper bolt lock plate

#590087

Stock:Yes