20 of 27 search results

SORT ON:

Bumper 10. Fits XS 0.8 chargers (906041 and 906042). This is a protective silicone rubber bumper that fits snugly around the charger body and offers additional grip and damage protection.
CTEK

CTEK, BUMPER10 protective charger bumper for 0.8A chargers

#906059

Stock:Yes

'The CONNECT - Clamp' is a 46cm long practical, quick and easy way to connect your CTEK charger to your battery. Perfect for moving your charger quickly between different batteries in workshops or showrooms. Comes with CTEK's 'Comfort Connect' connector to fit all CTEK products.
CTEK

CTEK, Comfort connect battery clamp

#906066

Stock:Yes

Max 4A.
Shido

Shido, battery charge extension cable. 3 meters

#932963

Stock:Yes

CTEK’s charger BUMPER for CT5 Powersport chargers. This is a protective silicone rubber bumper that fits snugly around the charger body and offers additional grip and damage protection.
CTEK

CTEK, CT5 protective charger bumper

#906063

Stock:Yes

Bumper 60. Fits MSX chargers 3.8A (906046 / 906047) and 5.0A (906048 / 906049). This is a protective silicone rubber bumper that fits snugly around the charger body and offers additional grip and damage protection.
CTEK

CTEK, BUMPER60 protective charger bumper for 3.8&5A chargers

#906061

Stock:Yes

For wet lead-acid / AGM batteries (excl. lithium batteries). Max 4.0A. With 6mm eyelets. With green/amber/red LED charge indicators
Shido

Shido, quick connect battery charge/monitor cable

#932962

Stock:Yes

MXS charger wall mount. Allows you to store the MSX charger and also stores the clamp-on charge cables, when not in use. Fits all MXS chargers, both 3.8A (906046 / 906047) and 5A (906048 / 906049) models. The open frame design allows easy access to charger functions.
CTEK

CTEK, MXS 3.8A and 5.0A battery charger mounting bracket

#906057

Stock:Yes

For lithium LiFePO4 batteries only. Max 4.0A. With 6mm eyelets. With green/amber/red LED charge indicators
Shido

Shido, quick connect battery charge/monitor cable. Lithium

#932967

Stock:Yes

Quick Disconnect charge cable. With dual SAE connector. Lets you connect any Battery Tender or other charger with SAE connector. 25 Ft. (7.5 meters).
Battery Tender

Battery Tender, extension charge cable 25ft.

#990048

Stock:No

8A. 21-12mm. Allows you to draw power or charge the battery through an on-board cigarette lighter / power point.
Shido

Shido, cigarette lighter plug cable

#932966

Stock:Yes

Monitor cable for Lithium batteries. 60cm long. With M6 / 1/4" ringlets to 2-pin SAE connector with waterproof sealing cap. - Micro processor driven 4 LED system used to monitor battery status. - Informs you if the battery is in a good/needs charge/not good condition - When the engine is running it also informs you if the vehicle's charging system is working. Then the LED mode changes to an arrow, with the pointer reaching the LED matching the voltage being delivered by charging system. No arrow means there is no charge - A bright red LED warns that the charge level has reached 50% and that it is time to recharge that battery - During vehicle storage the LED matching the battery’s state of charge will blink every 5 seconds, drawing very little power (0.2 milli-amps) to do so, in fact 20-100 times less than the vehicle’s circuitry is drawing from the battery at the same time - Fast blink mode for first 15 seconds after connection to battery, for quick check of multiple batteries (e.g. vehicles on showroom floor)
Optimate

Tecmate OptiMATE Monitor O-127 cable. Lithium

#941815

Stock:Yes

Max 30A.
Shido

Shido, battery charge cable with crocodile clamps

#932964

Stock:Yes

'The INDICATOR – Clamp'. 1.5 meter cable length A practical and quick way to connect your CTEK charger to your battery and see on the 'traffic light' LED indicator system a battery status indication. The Indicator Clamp is perfect for moving your charger quickly between different batteries in workshops or showrooms to learn what battery needs charging.
CTEK

CTEK, Comfort indicator clamps

#906068

Stock:Yes

Max 4.0A. With fuse and 6mm eyelets.
Shido

Shido, quick connect battery charge cable

#932965

Stock:Yes

Fused charge cable. Allows charging through the regular cigarette lighter / power point. Plugs directly into the powerpoint / cigarette lighter of the vehicle and lets you connect any Battery Tender or other charger with SAE connector.
Battery Tender
Discontinued

Battery Tender, Power Point charge cable

#990094

Stock:No

Monitor cable for AGM / Lead Acid batteries. 60cm long. With M6 / 1/4" ringlets to 2-pin SAE connector with waterproof sealing cap. 4 LEDs cover ‘full to empty’ voltage range of all 12V batteries, including higher voltage AGM for power sport (4th √√ LED ≥ 12.7V. - Micro processor driven 4 LED system used to monitor battery status. - Informs you if the battery is in a good/needs charge/not good condition - When the engine is running it also informs you if the vehicle's charging system is working. Then the LED mode changes to an arrow, with the pointer reaching the LED matching the voltage being delivered by charging system. No arrow means there is no charge - A bright red LED warns that the charge level has reached 50% and that it is time to recharge that battery - During vehicle storage the LED matching the battery’s state of charge will blink every 5 seconds, drawing very little power (0.2 milli-amps) to do so, in fact 20-100 times less than the vehicle’s circuitry is drawing from the battery at the same time - Fast blink mode for first 15 seconds after connection to battery, for quick check of multiple batteries (e.g. vehicles on showroom floor)
Optimate

Tecmate OptiMATE Monitor O-124 cable

#941543

Stock:Yes

Battery clips with a 15A fuse, with ‘easy grip’ rubber handles, custom designed to fit round, square (power sport) and flat tab posts. - Length=20"/50cm - Industry standard SAE 2-pin connector - 15A fuse - Cable max. rating: 10 Amp - -40°C/-40°F low temperature use. Cable remains flexible at ‘below freezing’ temperatures Note: Includes in-line rubber seal for OptiMATE heavy duty SAE connector.
Optimate

Tecmate, OptiMATE battery charge cable O-14

#941546

Stock:Yes

Premium quick connect permanent battery lead for power sport batteries, with weather protected connection system and cable. - Weatherproof battery lead, powersport - Length=20"/50cm - 1/4" / M6 ringlets - Industry standard 2-pin SAE connector - 15A fuse - Cable max. rating: 5 Amp - -40°C/-40°F very low temperature use; cable remains flexible at ‘below freezing’ temperatures Note: Rubber sealing cap & shroud for OptiMate heavy duty SAE connector
Optimate

Tecmate, OptiMATE battery charge cable O-01

#941545

Stock:Yes

'The CONNECT – Extension Cable' is 2.5 meters long and used when the battery is too far away from the charger to plug-in. Plugs into the CTEK charger’s 'Comfort Connect' accessory plug and attach the other end to the CTEK 'Comfort Connect' connectors on your CTEK accessories.
CTEK

CTEK, Comfort connect extension cable, 2.5m

#906067

Stock:Yes

CT5 charger wall mount. Allows you to store the CT5 charger and also stores the clamp-on charge cables, when not in use. Fits CT5 chargers (906043 and 906044). The open frame design allows easy access to charger functions.
CTEK

CTEK, CT5 battery charger mounting bracket

#906058

Stock:Yes