20 of 2014 search results

SORT ON:

Non stock type 'Crush Style Racing' exhaust gaskets. Used between head and head pipe. Stainless steel. Custom replacement for OEM 65324-83, 65324-83A and 65324-83B.
Feuling
New

Feuling, exhaust gasket set. Racing

#707762

Stock:Yes

Direct replacement for the stock head bolts and cylinder studs. Quality is much higher and recommended for performance builds. Complete kit. Head bolts: - Black oxide coated - Heat treated 8640 steel - 200.000 psi ultimate tensile strength - 9/16" 12 point head with integral washer - Formed threads - Cold formed head - Re-usable cylinder studs - 4140 Chrome Moly - Oil quenched and tempered to 39-44 HRC - 180,000psi Tensile Strength - Rounded thread roots, rather than flat, improving fatigue strength - Positive stop shoulder allows for consistent installed height
S&S
New

S&S. M8 head bolt & stud kit

#986077

Stock:Yes

84-90/10-up OEM style. OEM replacement reference 65324-83, 65324-83B, 17048-98. Note: The 84-90 /10-up style is preferred by many for better flow characteristics. Note: The 91-09 late style is a conical (tapered) shaped gasket that was introduced by The Factory in 1991 and replaced, again, with the early style in 2010. Note that the early style will fit all models and is generally seen as the better gasket design.
MCS
New

MCS, exhaust gasket set. 84-90/10-up style

#988605

Stock:Yes

Includes left and right side muffler to header gaskets, which are different size. OEM replacement reference 65900056, 65900056A (larger right side) and 65900017 65900017A (smaller left side), Note: The larger right side (65900056) also fits Pan America, the smaller left side (65900017) fits some Softail and XL models.
Cometic
New

Cometic, exhaust gasket kit. Header to muffler

#999665

Stock:Yes

- Used to install H-D exhaust gaskets into the cylinder head - Attaches to a 3/8" drive socket extension for precise gasket positioning - Installs exhaust gasket easily and evenly into head, without damage - Installs both tapered and straight gaskets - Constructed of impact-resistant nylon
S&S
New

S&S, exhaust gasket install tool

#701029

Stock:Yes

Fits 250cc two stroke models
Athena

Athena, cylinder head gasket H-D / Cagiva

#979877

Stock:Yes

.020" thick fiber reinforced paper. OEM replacement reference 25227-37 / 598-37.
James Gaskets

James, gasket cam cover .020" paper

#518316

Stock:Yes

.032" thick copper. For 3-5/8" big bore. Fits front & rear. Note: See 9778 for S&S 3-5/8" cylinder base gaskets.
S&S

S&S, cylinder head gaskets. .032" copper 3-5/8" big bore

#977839

Stock:Yes

Double lip oil seal. Steel backed, rubber OD. OEM replacement reference 83162-51.
Jims

JIMS, camshaft seal. Double lip. Rubber OD

#961366

Stock:Yes

.018" reinforced fiber. For S&S base pattern.
S&S

S&S, cylinder base gaskets. 4-3/8" bore

#977954

Stock:Yes

.020" thick reinforced graphite. Fits front & rear. For 3-5/8" big bore applications. Note: See 977839 for S&S 3-5/8" head gaskets.
S&S

S&S, cylinder base gaskets. .020" graphite 3-5/8" big bore

#977840

Stock:Yes

Cometic's AFM (Aluminum Foamet Material) gaskets are made with an aluminum core with a chemically blown, compounded nitrile synthetic thin foam-like rubber layer bonded to both sides. Temperature resistance of over 250°F (122°C). AFM rubber has a 85% recovery while maintaining strong torque retention. Re-torqueing, gasket sealers or silicone beads are not required. OEM replacement reference 16495-89, 26495-89A, 26495-89B.
Cometic

Cometic, oil pump body to case gasket. AFM

#561715

Stock:Yes

Copper. Standard bore. Type 'B' gaskets
Cometic

Cometic cyl base gasket .010" copper

#561218

Stock:Yes

Front & rear gasket set. With one oil hole. .020" thick RCS (Rubber Coated Steel), an embossed steel core with a .001" thick coating of heat resistant nitrile rubber on both sides. OEM replacement reference 16776-63 (front) and 16777-63 (rear) gaskets.
Cometic

Cometic, cylinder base gasket set FR/RR. .020" RCS

#561641

Stock:Yes

For bolt in cams.
Feuling

Feuling, cam change gasket & seal kit. Bolt-in

#588040

Stock:No

For high lift cams. Very complete kit. Includes cylinder base & head gaskets and more.
Feuling

Feuling, cam change gasket & seal kit. High-lift

#588041

Stock:No

For bolt-in cams.
Feuling

Feuling, cam change gasket & seal kit. Bolt-in

#588038

Stock:Yes

For high lift cams. Very complete kit. Includes cylinder base & head gaskets and more.
Feuling

Feuling, cam change gasket & seal kit. High lift

#588039

Stock:Yes

For high lift cams. Very complete kit. Includes cylinder base & head gaskets and more.
Feuling

Feuling, cam change gasket & seal kit. High lift

#588037

Stock:Yes

For bolt-in cams.
Feuling

Feuling, cam change gasket & seal kit. Bolt-in

#588036

Stock:No