20 of 419 search results

SORT ON:

Used to install the 998681 V2 Shark Demon™ Performance LED Road Glide headlamp kit an aftermarket amplifier. Requires no bracket modification or customization. This 16mm spacer kit bolts up to Custom Dynamics® mounting bracket to accommodate larger aftermarket amps like the Rockford Fosgate M5-800X4 amplifier (Dimensions 1.7" x 4.25" x 8.41").
Custom Dynamics
New

Custom Dynamics, Shark Demon headlamp amp spacer kit

#998682

Stock:Yes

ECE approved lens. Black reflector with 60W LED power in total. Offers 300% more light than the standard headlamp with 3450 lumens on high beam and 2800 lumens on low beam. Designed to challenge the dark with confidence. Light beams are focused in front of the bike. Comes with a die-cast aluminum case and a polycarbonate lens. Note: Comes with ECE approval. Includes comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards.
Killer Custom
New

Killer Custom, Black LED Headlight Kit V-Rod 'Night Ride'

#993633

Stock:No

This combo kit includes a bright white, DOT compliant headlight with a low beam of three projection-style LEDs and a high beam which adds four additional direct-reflective LEDs boasting an impressive 9080 raw/3216 effective lumens. SAE compliant, selective yellow fog lamp provides an additional 8050 raw/2050 effective lumens and riding clarity like you’ve never experienced before. Lamp assemblies are completely sealed IP67, waterproof with polycarbonate lens and gloss black aluminum housing. Three millimeter, 304 gloss black stainless steel mounting brackets are engineered to minimize assembly and installation time. Plug and play wire harness plugs into factory wiring (no connection the battery), and mounting hardware is also included. Auxiliary On Off Switch (sold separately) can be added to independently control the selective yellow fog lamp.
Custom Dynamics
New

Custom Dynamics, V2 Shark Demon Headlight + Fog Combo Kit

#700706

Stock:No

Installing a LED headlamp on a bike that was equipped with a regular H4 light bulb may trigger fault codes / trouble codes, on motorcycles with CAN-bus wiring system. This Bright CAN-bus headlamp adapter will prevent any error codes due to LED headlamp installment. Works with all H4 style 3-prong connectors. NOTE: Not available for sale in Germany
MCS
New

Bright, CAN-bus headlamp adapter

#998322

Stock:Yes

ECE, DOT & SAE approved. Shark Demon LED headlamps offer high-performance illumination, specialized for motorcycle on road use with unmatched beam pattern and durability. Low beam projects 11,314 raw/5554 effective lumens from six projection-style LEDs. High beam adds eight additional direct-reflective LEDs boasting an impressive 22,274 raw/8634 effective lumens total. Side facing position lights further increase viewing angle and width of beam pattern for ditch-to-ditch illumination. Lamp assemblies are completely sealed IP67, waterproof with clear polycarbonate lens and gloss black aluminum housing. Includes 3mm thick 304 gloss black stainless steel mounting brackets, plug and play wire harness, and mounting hardware. - Plug & Play - ECE approved - Unmatched beam pattern - Side facing position lights - Includes wiring harness, mounting brackets & hardware. Note: Larger aftermarket amplifiers require 998682 Fairing Spacer Kit, which must be purchased separately. Note: When installing with fairing vent lights, modification is required.
Custom Dynamics
New

Custom Dynamics, V2 Shark Demon LED headlamp kit

#998681

Stock:Yes

Universal side-mount 181mm (7.1") diameter LED headlamp. Comes with DRL (Daytime Running Lamp), low & high beam, all are white light emitting LEDs. DOT and SAE certified. Lightweight, durable die-cast housing. The LED light design gives a great look and offers excellent illumination. - DRL: 4 LED's, 12V, 2.7W, clear outer lens, white inner lens - High Beam: 1 x LED Module (10 of 10 LEDs). 12 V, 20.2 W, clear inner & outer lens - Low Beam: 1 x LED Module (8 of 10 LEDs). 12 V, 24.9 W, clear inner & outer lens - Brightness: Low beam 1889 lumens, high beam 1557.7 lumens - E-approved: E24*148R00/03*0167*00 - Dimensions: 181mm (7.1") diameter x 96mm deep - Side mount
Koso
New

KOSO, Xenith LED headlamp

#995713

Stock:No

ECE & DOT approved. Black bezel. With a switchable white/amber (orange) colored halo-ring/position light. Economical high/low beam LED conversion head lamp unit to replace the stock H4 unit. LEDs are an improvement at all levels when compared to H4 lighting and offer more effective and whiter light at 6000K, much better reliability and less amperage draw. - White / amber switchable halo-ring/position light - Unit comes complete with wiring with a 3-prong plug that is identical to a standard H4 light bulb, allowing a plug & play conversion - Compatible with left side (UK) & right side (EU) driving - 143.8mm (5.66") diameter - 88.7mm (3.49") deep - 6500K color temperature - Theoretical power at high beam 66W - 12-Volt DC - Passing beam 21W - Driving beam 31W - Halo ring/position light 60 LEDs 5.2W - Approval E24*50R01/00*0463*00 NOTE: Not available for sale in Germany.
MCS
New

Bright, 5.3/4" LED headlamp unit. Black

#955824

Stock:Yes

Plug & Play ECE, DOT-compliant performance LED headlamp. The Shark Demon® 2 FLH Batwing Headlight Kit offers high-performance illumination, specialized for motorcycle on road use. ECE, DOT compliant design with unmatched beam pattern and durability. Low beam projects 3600 raw/2651 effective lumens from three projection-style LEDs. High beam adds four additional direct-reflective LEDs boasting an impressive 9080 raw/4485 effective lumens total. Single lamp assembly is completely sealed IP67, waterproof with clear polycarbonate lens and gloss black aluminum housing. 3mm, 304 gloss black stainless steel mounting bracket offers OEM style headlight adjustability for proper aiming. Includes Plug and Play wire harness and mounting hardware for direct OEM replacement installation.
Custom Dynamics
New

Custom Dynamics, Shark Demon LED Headlamp unit

#700703

Stock:Yes

With blue dot. Chrome plated steel. Bottom mount. Complete with bucket/shell, trim ring, insert ring for light unit and wiring with H4 connector. Note: Without mounting block.
MCS

4-1/2" mini headlamp, shell only. Chrome

#990091

Stock:Yes

Old style side mounted headlamp with a strong reference to the 50's and 60's style headlamp designs, where the speedo was incorporated in the headlamp shell. This Vintage headlamp comes with 60mm speedo mounting hole in the rear section of the headlamp housing. - Chrome housing with chrome trim ring - With 55/60W H-4 bulb - ECE approved lens - 60mm speedometer hole. Note: Designed for use with 60mm diameter Velona speedo or tachometers series. See our speedo chapter. Note: For an optional style matching fork tube mounted headlamp bracket see 510134 black steel (for 39mm tubes), 510133 polished stainless steel or 510136 black steel (for 41mm fork tubes).
Daytona

Daytona, Vintage 5-3/4" headlamp. Chrome

#900937

Stock:Yes

- Chrome - With HS1 12V 35/35W and position light - ECE approved lens - Housing dimensions: Overalll 125mm ø, housing depth 140mm, glass diameter 100mm
MCS

Nevada 4" stretched ABS headlamp. Chrome

#913704

Stock:Yes

- Black - With HS1 12V 35/35W and position light - ECE approved lens - Housing dimensions: Overalll 125mm ø, housing depth 140mm, glass diameter 100mm
MCS

Nevada 4" stretched ABS headlamp. Black

#913700

Stock:Yes

Black painted steel. Compatible with 900937 (chrome) and 900938 (black with chrome trim ring) Vintage headlamps.
MCS

Bracket for 'vintage' headlamp. 39mm fork tubes. Black

#510134

Stock:Yes

Polished stainless steel. Compatible with 900937 (chrome) and 900938 (black with chrome trim ring) Vintage headlamps.
MCS

Bracket for 'vintage' headlamp. 41mm fork tubes. Polished ss

#510133

Stock:Yes

Reproduction headlamp for restauration purposes. No ECE approval. OEM replacement reference 4901-35C.
MCS

6-1/2" springer headlamp assembly. 6v. Chrome

#516743

Stock:Yes

Matte black powder coated finish. Used to allow a conversion from the Sportster S OEM LED headlamp to the classic Bates style headlamp. The true touch of custom Harley spirit is guranteed. Note: A Bates style headlamp must be ordered separately.
Kodlin

Kodlin, Sportster S headlamp conversion bracket. Black

#963493

Stock:Yes

Black painted steel. Compatible with 900937 (chrome) and 900938 (black with chrome trim ring) Vintage headlamps.
MCS

Bracket for 'vintage' headlamp. 41mm fork tubes. Black

#510136

Stock:Yes

For 41mm diameter fork tubes. Black anodized CNC machined aluminium construction. These brackets have two clamps that can slide up and down the fork tube. By sliding both you can move your headlamp up and down, by sliding only one you can position the headlamp further in or out. Complete with turn signal mount kit for M8 threaded turn signals.
Daytona

Daytona, Dual Axis adjustable headlamp bracket. 41mm

#968851

Stock:Yes

For 35mm diameter fork tubes. Black anodized CNC machined aluminium construction. These brackets have two clamps that can slide up and down the fork tube. By sliding both you can move your headlamp up and down, by sliding only one you can position the headlamp further in or out. Complete with turn signal mount kit for M8 threaded turn signals.
Daytona

Daytona, Dual Axis adjustable headlamp bracket. 35mm

#968849

Stock:Yes

Chrome plated aluminum. Comes complete with fork-to-bracket inserts to compensate for fork diameter. Used on headlamps with side mounts.
MCS

Clampah, side-mount headlamp bracket assembly. Chrome

#508773

Stock:Yes