20 of 1179 search results

SORT ON:

We have those Fork Tube Caps to cover the upper bolts. Perfect CNC machined billet aluminum and black powder-coated smooth finish will make your front fork look more aggressive and modern.
Killer Custom
New

Killer Custom, Fork Caps. Black

#708957

Stock:Yes

Allows you to run a radial caliper on the rear of your FXR.
Kraus
New

Kraus, Rear Radial Caliper Mount. Black

#704056

Stock:Yes

The new "Tomahawk" Series Indian Scout Full Fork Cover set is made of CNC billet aluminum and gives your Indian Scout that Fat fork looks that you always wanted. Made to fit original and any aftermarket front fenders. Super gloss black powder coated, excellent for your aggressive and custom Indian Scout look. With original turn signals.
Killer Custom
New

Killer Custom, Tomahawk Series Full Fork Covers Set. Black

#708946

Stock:No

We have those upper fork covers for 2015-up Indian Scout to protect the chrome gap between your triples trees, which is even bigger if you remove your original turn signals. Perfect CNC machined billet aluminum and black Powder-coated super gloss finish will make your front end look more aggressive and modern. Without OEM turn signals version.
Killer Custom
New

Killer Custom, Upper Fork Covers Full. Black

#708948

Stock:Yes

We have those upper fork covers for 2015-up Indian Scout to protect the chrome gap between your triples trees, which is even bigger if you remove your original turn signals. Perfect CNC machined billet aluminum and black Powder-coated super gloss finish will make your front end look more aggressive and modern. OEM turn signals version.
Killer Custom
New

Killer Custom, Upper Fork Covers Short. Black

#708949

Stock:Yes

+2" over stock length. Asymmetrical monotube damper kit with FST dampers. Spring rate and damping is pre-set. No modification to forks required. This true high performance Progressive Suspension asymmetrical monotube fork kit that features a set of gas charged road smoothing Frequency Sensing Technology (FST) dampers and custom tuned progressive rate fork springs. Offers better road holding, better resistance to front brake dive, less susceptibility to bottoming out and improved stability in cornering. Comes as a complete replacement kit including all internal fork components, apart from the fork tubes and oil.
Progressive Suspension
New

PS, FST fork monotube cartridge kit. +2" over stock

#993400

Stock:Yes

Perfect quality V-Rod Full fork Cover set made of CNC billet aluminum and gives your V-Rod that Fat fork look that you always wanted. Made to fit original and any aftermarket front fenders. Super gloss black powder coated excellent for your aggressive and custom V-Rod look. Note: For 07-11 V-Rod models The Factory used 3 different sizes of triple trees. It is therefore required to measure the distance between upper and lower triple tree clamps to be able to order the correct kit. It can be: 212 mm (993627), 213 mm (993628) and 214 mm (993629).
Killer Custom
New

Killer Custom, V-Rod 'Aggressor' full fork cover set. 214 mm

#993629

Stock:No

Progressive Suspension
New

PS, front fork springs. 35/80 Spring rate

#996258

Stock:Yes

Designed to give you a lowered front end for a superior ride and that slammed low look. Reduces front end 'dive' during braking, giving you more control and confidence. Includes instructions and all components required for a bolt-in installation. Note: Since the the bike is lowered the side stand may require modification. Note: Complete with fork spring spacers. Cut to around length indicated, longer is more preload, shorter is less preload, to suit your personal preference and weight. Note: For the matching 12.2" long Slammer rear shock see 993382.
Burly
New

Burly, Softail M8 Slammer fork kit

#993383

Stock:Yes

Kit includes 1 fork oil seal and 1 fork dust seal to service one fork leg. Order 2 kits for one motorcycle. Replacement for 45378-87 oil seal and 45401-87 dust seal. - 20% less dynamic friction - Improved feel and smoothness - Increased life and performance - Enhanced water and dirt protection - Reduced wear and air suction - Reduced stiction - Excellent temperature stability - Longer lifespan than regular fork seals
SKF
New

SKF, fork seal kit 39mm. Green. (one fork tube)

#701712

Stock:Yes

Perfect quality V-Rod Full fork Cover set made of CNC billet aluminum and gives your V-Rod that Fat fork look that you always wanted. Made to fit original and any aftermarket front fenders. Super gloss black powder coated excellent for your aggressive and custom V-Rod look. Note: For 07-11 V-Rod models The Factory used 3 different sizes of triple trees. It is therefore required to measure the distance between upper and lower triple tree clamps to be able to order the correct kit. It can be: 212 mm (993627), 213 mm (993628) and 214 mm (993629).
Killer Custom
New

Killer Custom, V-Rod 'Aggressor' full fork cover set. 212 mm

#993627

Stock:No

Designed to give you a lowered front end for a superior ride and that slammed low look. Reduces front end 'dive' during braking, giving you more control and confidence. Includes instructions and all components required for a bolt-in installation. Note: Since the the bike is lowered the side stand may require modification. Note: Complete with fork spring spacers. Cut to around length indicated, longer is more preload, shorter is less preload, to suit your personal preference and weight. Note: For the matching 12.2" long Slammer rear shock see 993382.
Burly
New

Burly, Softail M8 Slammer fork kit

#993384

Stock:Yes

Perfect quality V-Rod Full fork Cover set made of CNC billet aluminum and gives your V-Rod that Fat fork look that you always wanted. Made to fit original and any aftermarket front fenders. Super gloss black powder coated excellent for your aggressive and custom V-Rod look. Note: For 07-11 V-Rod models The Factory used 3 different sizes of triple trees. It is therefore required to measure the distance between upper and lower triple tree clamps to be able to order the correct kit. It can be: 212 mm (993627), 213 mm (993628) and 214 mm (993629).
Killer Custom
New

Killer Custom, V-Rod 'Aggressor' full fork cover set. 213 mm

#993628

Stock:No

Kit includes 1 fork oil seal and 1 fork dust seal to service one fork leg. Order 2 kits for one motorcycle. Replacement for 45875-84A oil seal. Replacement for 46175-00 dust seal is included but used on some FXSTD, FXSTC, FXS only. - 20% less dynamic friction - Improved feel and smoothness - Increased life and performance - Enhanced water and dirt protection - Reduced wear and air suction - Reduced stiction - Excellent temperature stability - Longer lifespan than regular fork seals
SKF
New

SKF, fork seal kit 41mm. Green. (one fork tube)

#701713

Stock:Yes

Replacement for 46516-01 upper and 46080-01 lower fork slider bushing. Dimensions: Upper bushing 52x15x1.5mm, lower bushing 50x20x1mm. Kit includes 1 upper and 1 lower fork slider bushing. Enough to service one fork leg. Order 2 kits for one motorcycle. Used inside the lower fork slider to guide the fork tube. Bushings are plated steel, the PTFE coated inner lining reduces friction / fork-stiction over other materials. This super slick surface provides smooth suspension and helps reduce friction and wear. Used inside the lower fork slider to guide the fork tube. The SKF composite bushings are copper plated stainless steel, with a PTFE based inner lining to help reduces friction / fork-stiction better than other materials. To enhance heat dissipation during operation, a thin bronze layer forms a robust bond between the backing and sliding surface. The super slick sliding surface provides smooth suspension and does a great job in reducing friction and wear. - PTFE based low friction seal - Low stiction - No maintenance - Low friction under side load - High load carrying capacity - Temperature stable - Small operating clearance for improved guidance - Dimensions marked for quick identification
SKF
New

SKF, fork slide bushing kit 49 mm. (one fork tibe)

#701716

Stock:Yes

We have those lower fork covers for 2015-up Indian Scout to cover chrome gap between your lower legs and lower trees. Perfect CNC machined billet aluminum and black Powder-coated super gloss finish will make your front end look more aggressive and modern.
Killer Custom
New

Killer Custom, Lower Fork Covers. Black

#708947

Stock:Yes

+2" over stock length. Spring rate and damping is pre-set. This symmetrical Progressive Suspension monotube fork spring kit requires no modification to forks, but offers true high performance front suspension with improved stability in cornering and better road holding. Features a set of gas charged Monotube damper cartridges and a set of custom tuned fork springs. Comes as a complete replacement kit including all internal fork components, apart from the fork tubes and oil. Note: See 974585 for standard length.
Progressive Suspension
New

PS, symmetrical fork monotube cartridge kit. +2" height

#993401

Stock:No

The new "Tomahawk" Series Indian Scout Full Fork Cover set is made of CNC billet aluminum and gives your Indian Scout that Fat fork looks that you always wanted. Made to fit original and any aftermarket front fenders. Super gloss black powder coated, excellent for your aggressive and custom Indian Scout look. Without original turn signals.
Killer Custom
New

Killer Custom, Tomahawk Series Full fork Cover Set. Black

#708945

Stock:No

Black KR8 front end kit with Öhlins black anodized forks. Front end upgrade for Baggers, designed specifically for performance upgrades to any level. Kit comes complete with Öhlins inverted front forks for superior handling and ride quality. Forks offer adjustable spring preload, compression, rebound damping. The Kraus KR8 Component Kit comes with upper & lower triple trees, fork stem, a 25mm wheel axle, Kraus radial brake mounts and fork guards to protect the fork sliders/seals from road debries. The result of this partnership between Kraus Moto and Öhlins racing technology, ensures you of a top-of-the-line front end and a perfect set-up for any standard to serious performance bagger. This kit is a bolt-on installation with all required installation hardware to run factory/stock wheels*, brakes* and bodywork. - Length 800 mm - Stroke 120 mm - Top clamp diameter 50mm - Lower clamp diameter 54mm - Wheel axle diameter 25mm - Fork stem diameter 30mm - Fully adjustable preload, compression & rebound. Note: Please contact Motorcycle Storehouse Tech when ordering this fork. Tech Support can advise you on correct spring set-up for a specific rider weight and, if required, mods for Bagger Racing applications. Note: The KR8 Front End Component Kit comes with a 25mm axle. If your bike has a 1"(25.4mm) wheel axle you will need to convert the wheel bearings to 25mm. Note*: Compatible with 108mm radial brake fitment only. Note: For compatible Kraus radial brake calipers see 706032 (left) and 706033 (right) RT3 caliper or 706034 (left) and 706035 (right) Kraus RTX8 road legal race calipers. Note: Perfectly compatible with the Kraus Isolated Riser system, allowing a customizable riding position for improved ergonomics and even better control of your bike. Note: See required 701518 front fender adapter kit for most 24-up H-D Touring models.
Kraus
New

Kraus, KR8 inverted front end kit. Black

#988604

Stock:No

Black KR8 front end kit with Öhlins gold anodized forks. Front end upgrade for Baggers, designed specifically for performance upgrades to any level. Kit comes complete with Öhlins inverted front forks for superior handling and ride quality. Forks offer adjustable spring preload, compression, rebound damping. The Kraus KR8 Component Kit comes with upper & lower triple trees, fork stem, a 25mm wheel axle, Kraus radial brake mounts and fork guards to protect the fork sliders/seals from road debris. The result of this partnership between Kraus Moto and Öhlins racing technology, ensures you of a top-of-the-line front end and a perfect set-up for any standard to serious performance bagger. This kit is a bolt-on installation with all required installation hardware to run factory/stock wheels*, brakes* and bodywork. - Length 800 mm - Stroke 120 mm - Top clamp diameter 50mm - Lower clamp diameter 54mm - Wheel axle diameter 25mm - Fork stem diameter 30mm - Fully adjustable preload, compression & rebound. Note: Please contact Motorcycle Storehouse Tech when ordering this fork. Tech Support can advise you on correct spring set-up for a specific rider weight and, if required, mods for Bagger Racing applications. Note: The KR8 Front End Component Kit comes with a 25mm axle. If your bike has a 1"(25.4mm) wheel axle you will need to convert the wheel bearings to 25mm. Note*: Compatible with 108mm radial brake fitment only. Note: For compatible Kraus radial brake calipers see 706032 (left) and 706033 (right) RT3 caliper or 706034 (left) and 706035 (right) Kraus RTX8 road legal race calipers. Note: Perfectly compatible with the Kraus Isolated Riser system, allowing a customizable riding position for improved ergonomics and even better control of your bike. Note: See required 701518 front fender adapter kit for most 24-up H-D Touring models.
Kraus
New

Kraus, KR8 inverted front end kit. Gold

#995362

Stock:No