20 of 21 search results

SORT ON:

OEM stock style replacement for OEM taillight baseplate 73381-12 and 67801288. Used with OEM wiring harness. Note: Additional wiring adapter 708783 required on 22-24 FXLRST Low Rider ST & 2022 FXRST Low Rider El Diablo models.
Custom Dynamics
New

Custom Dynamics, taillight baseplate. Black

#708966

Stock:No

This custom 3-1 taillight, brake light and turn signal combo may just be what you've been looking for when working towards an iconic look for your Bagger. Injection molded smoke lenses are installed in front of ultra bright power LEDs in a stylish CNC machined aluminum powder coated housing. DOT and ECE approved. Note: Style matching 'tribal' front turn signals are separately available as 575480
Killer Custom

Killer Custom, 3 in 1 'Tribal' LED tail light/turn signals

#575472

Stock:Yes

This custom 3-1 taillight, brake light and turn signal combo may just be what you've been looking for when working towards an iconic look for your Bagger. Injection molded smoke lenses are installed in front of ultra bright power LEDs in a stylish CNC machined aluminum powder coated housing. DOT and ECE approved. Note: Style matching 'Killer' front turn signals are separately available as 575475
Killer Custom

Killer Custom, 3 in 1 'Killer' LED tail light/turn signals

#575474

Stock:Yes

For German 180x200mm license plates. Black powder coated aluminum finish. Universal license plate holder in lightweight aluminum, a sturdy base for the license plate to prevent cracking. Can be installed to Killer Custom or any other bracket that is suitable for the specific bike. Includes two LED taillight/turn signal strip kits. The LEDs allowing a turn signal or a run-brake-turn set-up since they are dual (amber/red) colored. Features a total of 40 LEDs per strip, a 120 degree viewing angle, 1mm LED spacing and waterproof sealing. Operating range 9-14V. DOT and ECE approved.
Killer Custom

Killer Custom license plate holder with taillight/turn sigal

#575499

Stock:Yes

For German 180x200mm license plates. Raw aluminum finish. Universal license plate holder in lightweight aluminum, a sturdy base for the license plate to prevent cracking. Can be installed to Killer Custom or any other bracket that is suitable for the specific bike. Includes two LED taillight/turn signal strip kits. The LEDs allowing a turn signal or a run-brake-turn set-up since they are dual (amber/red) colored. Features a total of 40 LEDs per strip, a 120 degree viewing angle, 1mm LED spacing and waterproof sealing. Operating range 9-14V. DOT and ECE approved.
Killer Custom

Killer Custom license plate holder with taillight/turn sigal

#575500

Stock:No

This custom 3-1 taillight, brake light and turn signal combo may just be what you've been looking for when working towards an iconic look for your Bagger. Injection molded smoke lenses are installed in front of ultra bright power LEDs in a stylish CNC machined aluminum powder coated housing. DOT and ECE approved. Note: Style matching 'Stripes' front turn signals are separately available as 575481
Killer Custom

Killer Custom, 3 in 1 'Stripes' LED taillight/turn signals

#575471

Stock:No

Rubber gasket, Used between the Beehive taillight and the rear fender. OEM replacement reference 68124-39, 5065-39.
MCS

Gasket, Beehive taillight to fender

#940377

Stock:Yes

This custom 3-1 taillight, brake light and turn signal combo may just be what you've been looking for when working towards an iconic look for your Bagger. Injection molded smoke lenses are installed in front of ultra bright power LEDs in a stylish CNC machined aluminum powder coated housing. DOT and ECE approved. Note: Style matching 'Frame' front turn signals are separately available as 575476
Killer Custom

Killer Custom, 3-1 'Frame' LED taillight/turn signals

#575470

Stock:No

This custom 3-1 taillight, brake light and turn signal combo may just be what you've been looking for when working towards an iconic look for your Bagger. Injection molded smoke lenses are installed in front of ultra bright power LEDs in a stylish CNC machined aluminum powder coated housing. DOT and ECE approved. Note: Style matching 'Blank' front turn signals are separately available as 575482
Killer Custom

Killer Custom, 3 in 1 "Blank" LED taillight/turn signals

#575473

Stock:Yes

Button head bolt. Used to mount taillight lens to taillight base. OEM replacement reference 68026-99
Gardner-Westcott

GW, taillight lens mount kit. Button head. Chrome

#902556

Stock:No

Chrome; Buttonhead. Used to mount taillight lens to taillight base. OEM replacement reference 68026-73
Gardner-Westcott

GW, 73-99 taillight lens mount kit. Chrome buttonhead

#902555

Stock:No

For mounting the HKC Retro taillight
Hells Kitchen Choppers
SaleDiscontinued

HKC, Retro tallight bracket. Stainless steel. Maltese Cross

#982205

Stock:Yes

This bracket is required for installation of 519537 Laydown taillight on all 99-E03 H-D models
MCS

Installation bracket for 519537 taillight

#519538

Stock:Yes

For mounting the HKC Retro taillight
Hells Kitchen Choppers
Discontinued

HKC, Retro tallight bracket. Stainless steel. Smooth

#982169

Stock:No

Optional CNC machined steel housing for all Apollo lights for additional mounting options. Outside dimensions: 22mm diameter x 22mm deep. Inside dimensions: 20mm diameter x 21mm deep. Mounting hole diameter 5mm. Note: Compatible with 922147, 922148, 922149 and 943473 Apollo lights.
MCS

Steel weld-in housing for 'Apollo' lights

#922198

Stock:Yes

Optional CNC machined 1.3mm thick steel housing for all Module 1 lights. Outside dimensions: 24.5mm wide x 11.5mm high x 12mm deep. Inside dimensions: 22mm wide x 9mm high x 11mm deep. Mounting hole diameter 5mm.
MCS

Steel weld-in housing for 'Module 1' lights

#922143

Stock:Yes

Red lens. ECE approved. Fits FXWG and FXST models that have a Fat Bob style, bobbed, rear fender. This complete taillight kit includes a mounting bracket and perfectly blends in with the lines of the Fat Bob rear fender. Can also be used in custom applications where the Fat Bob rear fender is used. Note: See 573415 for taillight kit, including taillight bracket for under fender mount and a license plate bracket.
MCS

Custom Fat Bob taillight. Red lens

#500198

Stock:Yes

- Optional un-coated steel housing for additional installation options - CNC machined 1.1mm thick steel - Designed for installing Shorty and Shorty II and Shorty II Pro LED taillights and turn signals - Outside dimensions: 42.5mm wide x 11mm high x 14mm deep - Inside dimensions 40.5mm wide x 9mm high x 13mm deep - Mounting hole diameter 5mm. Note: Compatible with amongst others 943261, 943262, 943504, 922130, 922131, 922133, 922134, 943237, 943238, 943239, 922128, 922129, 922134 Shorty lights.
MCS
Discontinued

Steel weld-in housing for Shorty LED lights

#922134

Stock:No

Optional steel housing for additional installation options. CNC machined 1.3mm thick steel housing for all 'Stripe-Run' taillights and turn signals. Outside dimensions: 56mm wide x 10mm high x 19mm deep. Inside dimensions: 53mm wide x 7.5mm high x 18mm deep. Mounting hole diameter 5mm.
MCS

Steel weld-in housing for 'Stripe-Run' lights

#922205

Stock:No

Chrome. OEM style reproduction. Used to mount taillight lens to taillight base. OEM replacement reference 68026-73
MCS

73-98 taillight lens mount kit. Chrome buttonhead

#903825

Stock:No