20 of 451 search results

SORT ON:

Raw machined aluminum finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Straight Risers. 8" rise. Raw

#708356

Stock:Yes

Raw machined aluminum uncoated finish. Fits models with 1-1/8" (28mm) handlebar clamping area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 10" rise. Raw

#708319

Stock:Yes

Raw machined aluminum finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Straight Risers. 10" rise. Raw

#708344

Stock:Yes

Raw machined uncoated CNC machined aluminum. Kraus isolated riser are available in a straight and kickback (pullback) version. This isolated riser kickback brace is used to convert a Kraus isolated straight riser to a kickback style riser. It moves the handlebar 1.5" (38mm) towards the rider. This kickback brace is a midsection that is installed between the riser legs and the risers. Note: Adding the Kickback Brace will increase the handlebar height by about 2.25" (57mm). You may need to order legs depending on your desired height. Optional riser leg sets are available to change overall height as: Black: - 984613 89mm (3.5") long legs - 984614 140mm (5.5") long legs - 984615 191mm (7.5") long legs - 984616 241mm (9.5") long legs. Raw: - 707716 89mm (3.5") long legs - 707717 140mm (5.5") long legs - 707718 191mm (7.5") long legs. Note: Install long section of kickback brace towards the handlebar. Note: Compatible with Kraus isolated straight risers only.
Kraus
New

Kraus, Kickback Brace for isolated straight risers. Raw

#707718

Stock:Yes

Raw machined aluminum uncoated finish. Fits models with 1-1/8" (28mm) handlebar clamping area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 12" rise. Raw

#708320

Stock:Yes

Raw machined aluminum finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Straight Risers. 12" rise. Raw

#708346

Stock:Yes

Raw machined uncoated finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 8" rise. Raw

#708350

Stock:Yes

Raw machined uncoated finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 10" rise. Raw

#708352

Stock:Yes

Raw machined uncoated finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 5" rise. Raw

#708348

Stock:Yes

Raw machined aluminum uncoated finish. Fits models with 1-1/8" (28mm) handlebar clamping area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 8" rise. Raw

#708318

Stock:Yes

Raw machined uncoated finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 12" rise. Raw

#708354

Stock:Yes

Black anodized finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Straight Risers. 8" rise. Black

#708355

Stock:Yes

Black anodized finish. Fits models with 1-1/8" (28mm) handlebar clamping area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 5" rise. Black

#708316

Stock:Yes

Black anodized finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 5" rise. Black

#708347

Stock:Yes

Black anodized finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 12" rise. Black

#708353

Stock:Yes

Black anodized finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 10" rise. Black

#708351

Stock:No

Black anodized finish. With 1" (25.4mm) diameter handlebar clamp area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. This 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 8" rise. Black

#708349

Stock:Yes

Black anodized finish. Fits models with 1-1/8" (28mm) handlebar clamping area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 10" rise. Black

#704034

Stock:Yes

Black anodized finish. Fits models with 1-1/8" (28mm) handlebar clamping area. Sold without top clamp, the top clamp (top plate) is sold separately depending on application. The 'Kickback style' moves the handlebar 1.5" (38mm) towards the rider. These isolated risers are designed to be solid-mounted to the top triple tree and are installed with the supplied billet bushings. This creates a much more rigid bar setup, allowing for improved control and far greater use of your bike's suspension and braking capabilities. As for vibration dampening, the rubber bushings are relocated just below the handlebar. There they are placed inside the riser mid-section. The proprietary use of these rubber isolators drastically reduces the amount of unwanted movement at the bushings. This creates a much more solid bar feel, giving you greater confidence in your bike's handling. You'll notice the difference of a hard-mounted riser legs and relocated rubber isolators right away. - Far less vibration than rigid mounted risers and a much better bar feel. - Bottom clamp has an opening to accommodate hidden wiring - Top clamp ((top Plate) must be purchased separately depending on your application - 3.5" center to center for standard OEM H-D fitment - Bushing life is increased, maintenance lowered - Wiring slot in the center of the riser body allows for easy installation and clean wiring. Note: Sold without top clamp, the top clamp (top plate) is sold separately depending on application. Note: Kraus Isolated Risers are designed and engineered for universal fitment. Some modification may be required depending upon application. This product is NOT compatible with models that include integrated bar clamps on the triple tree top clamp. Note: Kraus Isolated Risers are a modular construction. You can run them without legs or swap out the risers legs for optional available lengths should you decide to run a shorter/taller rise down the line. See the 'optional Isolated Riser legs' for 4 available lengths between 3.5" (89mm) to 9.5" (241mm) tall.
Kraus
New

Kraus, Topless Isolated Kickback Risers. 12" rise. Black

#704033

Stock:Yes

10" (25.4cm) tall risers with an added 1-1/2" (3.8cm) kickback to provide the proper mix of comfort & control. Risers are CNC machined billet aluminum with a black anodized finish. Each billet riser features machined windows and sculpted pockets. Billet crossbar is integrated into each riser for added rigidity & for using a wire guide during installation. Specially designed uprights allow riser to be installed in the center of the factory triple tree nacelle opening on 2024 bagger models. Works with factory & aftermarket triple trees with 3.5" riser spacing. Not for 4" gauge mount. Accepts handlebars with 1" clamping area.
Arlen Ness
New

Arlen Ness, Universal Method 10" Risers. Black

#700732

Stock:Yes