Parts - Fenders - Fender

Brand name

16

Segment

3

Material

5

Position

2

Color

4

Finish

4

Tags

3

Wheel size

7

Approval

2

Width

24

Length

21

20 of 551 search results

Sort on:

SORT ON:

With side struts for carrying a passenger.
The 'Rodstr' rear fender really opens up that rear end. To keep your new found cool all lighting components, taillight, brake light and running lights are integrated into the fender. The two small, but super bright, LED light units are CE marked. A seat pan is included for those who want to fabricate their own seat. If you feel no need to take the custom seat fabrication route, a special Killer Custom custom seat, with upholstery, is separately available as 921591 or 921592. This fender will also take a stock FXBB seat. Made of hand-laid unpainted black gel coated fiberglass that is very stiff, strong, straight and light. Includes installation hardware and instructions.
Note: Comes with special metal side struts which makes this seat okay for carrying a passenger.
Note: All parts require fitment checks before painting and final assembly.
Note: A Killer Custom seat with upholstery is separately available as 921591 or 921592.
Note: Seat pan foam only, without upholstery, is available as 921594.
Note: For that true Killer look, using a lowering kit, available from Killer Custom as 587888 is recommended, it offers 20mm or 30mm lowering.

Killer Custom, Rear Fender 'Rodstr'

#993617

Stock:Yes

Designed for M8 Softail Street Bob and FXST lower legs. Compatible with the Killer Custom wide wheel triple trees and is suitable for various custom applications. Made of hand-laid unpainted black gel coated fiberglass that is very stiff, strong, straight, and light. It comes pre-drilled, all necessary mounting hardware is included.
Note: Fitment checks are always advised before painting and final assembly.

Killer Custom, Special Front Wide Wheel Fender

#993620

Stock:Yes

Custom front fender featuring stylish small tips on both sides. Where the stock fender is average, this one is ready to make another statement. Made of hand-laid unpainted black gel coated fiberglass that is very stiff, strong, straight and light. Comes pre-drilled and does not require additional parts for installation.

Killer Custom, custom front fender 'Fatty'

#993619

Stock:No

Designed for use with 23" wheels. Made of hand-laid unpainted black gel coated fiberglass that is very stiff, strong, straight, and light. It comes pre-drilled, all necessary mounting hardware is included.
Note: Fitment checks are always advised before painting and final assembly.

Killer Custom, 23" Front Fender 'Hot Rod Series'

#993618

Stock:No

Forged carbon.
Made from chopped carbon fiber strands mixed with resin and compressed in a mold. The result is a material that looks more like marble or camouflage, without a directional weave.

Carbon fiber front fender. Ultra light weight, just around 600 grams, and manufactured from highest quality pure carbon fiber. This makes this fender a must have add-on for any performance bagger. It shaves-off up to 4kg in weight when compared to the stock steel fender. Comes pre-drilled with fender spacers for a quick bolt-on application. EU made.
- Ultra light weight at around 600 grams
- Up to 4 kg. lighter than the stock steel fender
- Manufactured from top quality carbon fiber
- Gloss UV stable surface
- Mounting holes are pre-drilled
- Bolt-on replacement for stock front fender
- It is advised installation is done by a capable mechanic

Tommy & Sons, carbon fiber ST Style mid length wrapper front

#708787

Stock:No

Carbon Fiber front fender made with OEM quality tooling & the highest quality carbon composite materials available. Features a matching custom window design. Direct bolt-on fitment, requires no additional brackets. Comes in a polished high gloss finish which is engineered & tested for UV resistance.
- For 19" diameter front fender
- Compatible with up to 14" oversized brake rotors
- Compatible with 130/60-19" front tires
- Works with stock and most aftermarket fork legs

Arlen Ness, 19" Cafe front fender. Carbon fiber

#701085

Stock:Yes

Carbon Fiber front fender made with OEM quality tooling & the highest quality carbon composite materials available. Features a matching custom window design. Direct bolt-on fitment, requires no additional brackets. Comes in a polished high gloss finish which is engineered & tested for UV resistance.
- For 19" diameter front fender
- Compatible with up to 14" oversized brake rotors
- Compatible with 130/60-19" front tires
- Works with stock and most aftermarket fork legs

Arlen Ness, 19" Cafe front fender. Carbon fiber

#706922

Stock:No

Woven, hand laid carbon.
Made from a sheet of carbon fiber fabric woven in a crisscross pattern. Laid by hand into a mold, then cured in resin. The fabric layers are aligned in specific directions for strength.

Carbon fiber front fender. Ultra light weight, just around 600 grams, and manufactured from highest quality pure carbon fiber. This makes this fender a must have add-on for any performance bagger. It shaves-off up to 4kg in weight when compared to the stock steel fender. Comes pre-drilled with fender spacers for a quick bolt-on application. EU made.
- Ultra light weight at around 600 grams
- Up to 4 kg. lighter than the stock steel fender
- Manufactured from top quality carbon fiber
- Gloss UV stable surface
- Mounting holes are pre-drilled
- Bolt-on replacement for stock front fender
- It is advised installation is done by a capable mechanic

Tommy & Sons, carbon fiber ST Style mid length wrapper front

#708786

Stock:Yes

Forged carbon.
Made from chopped carbon fiber strands mixed with resin and compressed in a mold. The result is a material that looks more like marble or camouflage, without a directional weave.

Carbon fiber rear fender. Ultra light weight and manufactured from highest quality pure carbon fiber. This makes this fender a must have add-on for any performance bagger. Comes pre-drilled for a quick bolt-on application. EU made.
Note: Fender comes without cut outs for the original lights. New license plate holder and lights are required.
- Smooth wide shape, no cut for number plate
- Ultra light weight
- Manufactured from top quality carbon fiber
- Gloss UV stable surface
- Mounting holes are pre-drilled
- Bolt-on replacement for stock rear fender
- Tour Pak compatible
- It is advised installation is done by a capable mechanic

Tommy & Sons, carbon fiber stock style rear fender. Forged

#708789

Stock:Yes

Inspired by modern aesthetics and edgy lines, the "Tomahawk" rear fender redefines the concept of style and design of your Indian Scout motorcycle. Fender has a special shortened metal frame to replace that long stock one. Complete with an integrated ECE-marked tail light, this fender offers a modern design and enhanced visibility on the road. Compatible with the OEM solo seat.

Lights holds ECE approval and possesses comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards. Drive confidently with peace of mind.

Killer Custom, Rear Fender Tomahawk. Black

#708938

Stock:No

The new Indian Scout Rear Fender "Apache II" with three-in-one ECE marked running, brake, and turn signal lights is an accessory that combines style, functionality, and safety. Explicitly designed for the Indian Scout motorcycle, the "Apache II" rear fender mounts on the original fender bracket. The three-in-one running, brake, and turn signals integrate seamlessly into the fender. Compatible with the OEM solo seat. Fender comes with all the hardware needed.

Lights holds ECE approval and possesses comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards. Drive confidently with peace of mind.

Killer Custom, Rear Fender Apache II. Black

#708937

Stock:No

Introducing the Indian Scout Rear Fender "Apache", a classic and stylish accessory that seamlessly integrates into your motorcycle's look and mounts on the original fender bracket. Complete with an integrated ECE marked tail light, this fender offers both timeless design and enhanced visibility on the road. Compatible with the OEM solo seat.

Lights holds ECE approval and possesses comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards. Drive confidently with peace of mind.

Killer Custom, Rear Fender Apache. Black

#708936

Stock:Yes

A lightweight carbon fiber full length front fender, designed for use with large custom 21" wide & 5.50" wide fat tire equipped Baggers. Direct bolt-on installation ease, requires no additional brackets. The notched sides and smooth flowing body lines give contoured curves, which show from any angle.
- 8" wide
- For use with 21" x 5.50" custom front wheels with 180mm tires
- Compatible with up to 14" oversized brake rotors
- Perfect for use with Arlen Ness' bolt-on Smooth steel fork boots for a full transition to a complete fat tire kit.

Arlen Ness, carbon fiber Rapper front fender. Fat 21

#706923

Stock:Yes

Reduced weight, high strength, flowing lines offer a great view from any angle. This full length fender is designed to follow the contour of the wheel perfectly. Made from 3k prepreg carbon fiber. The side window is CNC cut for precision. Offers direct bolt-on installation ease. Kit includes CNC machined billet brackets that are gloss black anodized for lasting beauty.
- Compatible with up to 14" oversized brake rotors
- For use with 19" wheels
- Bolt-on installation
- Kit includes fender, billet brackets and required installation hardware

Arlen Ness, carbon fiber Wrapper front fender kit. 19"

#706921

Stock:Yes

Without side struts, not suitable for carrying a passenger.
The 'Rodstr' rear fender really opens up that rear end. To keep your new found cool all lighting components, taillight, brake light and running lights are integrated into the fender. The two small, but super bright, LED light units are CE marked. A seat pan is included for those who want to fabricate their own seat. If you feel no need to take the custom seat fabrication route, a special Killer Custom custom seat, with upholstery, is separately available as 921591 or 921592. This fender will also take a stock FXBB seat. Made of hand-laid unpainted black gel coated fiberglass that is very stiff, strong, straight and light. Includes installation hardware and instructions.
Note: Comes without special metal side struts, so not suitable for carrying a passenger.
Note: All parts require fitment checks before painting and final assembly.
Note: A Killer Custom seat with upholstery is separately available as 921591 or 921592.
Note: Seat pan foam only, without upholstery, is available as 921594.
Note: For that true Killer look, using a lowering kit, available from Killer Custom as 587888 is recommended, it offers 20mm or 30mm lowering.

Killer Custom, Rear Fender 'Rodstr'

#993583

Stock:Yes

Without side struts, not suitable for carrying a passenger.
The 'Rodstr' rear fender really opens up that rear end. To keep your new found cool all lighting components, taillight, brake light and running lights are integrated into the fender. The two small, but super bright, LED light units are CE marked. A seat pan is included for those who want to fabricate their own seat. If you feel no need to take the custom seat fabrication route, a special Killer Custom custom seat, with upholstery, is separately available as 921591 or 921592. This fender will also take a stock FXBB seat. Made of hand-laid unpainted black gel coated fiberglass that is very stiff, strong, straight and light. Includes installation hardware and instructions.
Note: Comes without special metal side struts, so not suitable for carrying a passenger.
Note: All parts require fitment checks before painting and final assembly.
Note: A Killer Custom seat with upholstery is separately available as 921591 or 921592.
Note: Seat pan foam only, without upholstery, is available as 921594.
Note: For that true Killer look, using a lowering kit, available from Killer Custom as 587888 is recommended, it offers 20mm or 30mm lowering.

Killer Custom, Rear Fender 'Rodstr'

#993584

Stock:Yes

Carbon Fiber front fender made with OEM quality tooling & the highest quality carbon composite materials available. Features a matching custom window design. Direct bolt-on fitment, requires no additional brackets. Comes in a polished high gloss finish which is engineered & tested for UV resistance.
- For 19" diameter front fender
- Compatible with up to 14" oversized brake rotors
- Compatible with 130/60-19" front tires
- Works with stock and most aftermarket fork legs

Arlen Ness, 19" Cafe front fender. Carbon fiber

#701086

Stock:Yes

Reduced weight, high strength, flowing lines offer a great view from any angle. This full length fender is designed to follow the contour of the wheel perfectly. Made from 3k prepreg carbon fiber. The side window is CNC cut for precision. Offers direct bolt-on installation ease. Kit includes CNC machined billet brackets that are gloss black anodized for lasting beauty.
- Compatible with up to 14" oversized brake rotors
- For use with 19" wheels
- Bolt-on installation
- Kit includes fender, billet brackets and required installation hardware

Arlen Ness, carbon fiber Wrapper front fender kit. 19"

#706920

Stock:Yes

Woven, hand laid carbon.
Made from a sheet of carbon fiber fabric woven in a crisscross pattern. Laid by hand into a mold, then cured in resin. The fabric layers are aligned in specific directions for strength.

A carbon fiber rear fender, lightweight but without strength issues so great for everyday riding. Bolt-on installation, simple and hassle-free. Eye candy and less weight has never hurt performance. A functional upgrade with just the right amount of attitude. EU made.
Note: Fender comes without cut outs for the original lights. License plate and lights relocation is required.
- Smooth wide shape, no cut for number plate
- Ultra light weight
- Manufactured from top quality carbon fiber
- Gloss UV stable surface
- Mount holes are pre-drilled
- Bolt-on replacement for stock rear fender

Tommy & Sons, carbon fiber stock style rear fender. Woven

#709929

Stock:Yes

Forged carbon.
Made from chopped carbon fiber strands mixed with resin and compressed in a mold. The result is a material that looks more like marble or camouflage, no two are alike, without a directional weave.

A carbon fiber rear fender, lightweight but without strength issues so great for everyday riding. Bolt-on installation, simple and hassle-free. Eye candy and less weight has never hurt performance. A functional upgrade with just the right amount of attitude. EU made.
Note: Fender comes without cut outs for the original lights. License plate and lights relocation is required.
- Smooth wide shape, no cut for number plate
- Ultra light weight
- Manufactured from top quality carbon fiber
- Gloss UV stable surface
- Mount holes are pre-drilled
- Bolt-on replacement for stock rear fender

Tommy & Sons, carbon fiber stock style rear fender. Forged

#709930

Stock:Yes