20 of 156 search results

SORT ON:

ECE approved lens. Black reflector with 60W LED power in total. Offers 300% more light than the standard headlamp with 3450 lumens on high beam and 2800 lumens on low beam. Designed to challenge the dark with confidence. Light beams are focused in front of the bike. Comes with a die-cast aluminum case and a polycarbonate lens. Note: Comes with ECE approval. Includes comprehensive legal documentation, affirming its suitability for road use, assuring safety, and compliance with regulatory standards.
Killer Custom
New

Killer Custom, Black LED Headlight Kit V-Rod 'Night Ride'

#993633

Stock:No

This combo kit includes a bright white, DOT compliant headlight with a low beam of three projection-style LEDs and a high beam which adds four additional direct-reflective LEDs boasting an impressive 9080 raw/3216 effective lumens. SAE compliant, selective yellow fog lamp provides an additional 8050 raw/2050 effective lumens and riding clarity like you’ve never experienced before. Lamp assemblies are completely sealed IP67, waterproof with polycarbonate lens and gloss black aluminum housing. Three millimeter, 304 gloss black stainless steel mounting brackets are engineered to minimize assembly and installation time. Plug and play wire harness plugs into factory wiring (no connection the battery), and mounting hardware is also included. Auxiliary On Off Switch (sold separately) can be added to independently control the selective yellow fog lamp.
Custom Dynamics
New

Custom Dynamics, V2 Shark Demon Headlight + Fog Combo Kit

#700706

Stock:No

Universal side-mount 181mm (7.1") diameter LED headlamp. Comes with DRL (Daytime Running Lamp), low & high beam, all are white light emitting LEDs. DOT and SAE certified. Lightweight, durable die-cast housing. The LED light design gives a great look and offers excellent illumination. - DRL: 4 LED's, 12V, 2.7W, clear outer lens, white inner lens - High Beam: 1 x LED Module (10 of 10 LEDs). 12 V, 20.2 W, clear inner & outer lens - Low Beam: 1 x LED Module (8 of 10 LEDs). 12 V, 24.9 W, clear inner & outer lens - Brightness: Low beam 1889 lumens, high beam 1557.7 lumens - E-approved: E24*148R00/03*0167*00 - Dimensions: 181mm (7.1") diameter x 96mm deep - Side mount
Koso
New

KOSO, Xenith LED headlamp

#995713

Stock:No

ECE & DOT approved. Black bezel. With a switchable white/amber (orange) colored halo-ring/position light. Economical high/low beam LED conversion head lamp unit to replace the stock H4 unit. LEDs are an improvement at all levels when compared to H4 lighting and offer more effective and whiter light at 6000K, much better reliability and less amperage draw. - White / amber switchable halo-ring/position light - Unit comes complete with wiring with a 3-prong plug that is identical to a standard H4 light bulb, allowing a plug & play conversion - Compatible with left side (UK) & right side (EU) driving - 143.8mm (5.66") diameter - 88.7mm (3.49") deep - 6500K color temperature - Theoretical power at high beam 66W - 12-Volt DC - Passing beam 21W - Driving beam 31W - Halo ring/position light 60 LEDs 5.2W - Approval E24*50R01/00*0463*00 NOTE: Not available for sale in Germany.
MCS
New

Bright, 5.3/4" LED headlamp unit. Black

#955824

Stock:Yes

Plug & Play ECE, DOT-compliant performance LED headlamp. The Shark Demon® 2 FLH Batwing Headlight Kit offers high-performance illumination, specialized for motorcycle on road use. ECE, DOT compliant design with unmatched beam pattern and durability. Low beam projects 3600 raw/2651 effective lumens from three projection-style LEDs. High beam adds four additional direct-reflective LEDs boasting an impressive 9080 raw/4485 effective lumens total. Single lamp assembly is completely sealed IP67, waterproof with clear polycarbonate lens and gloss black aluminum housing. 3mm, 304 gloss black stainless steel mounting bracket offers OEM style headlight adjustability for proper aiming. Includes Plug and Play wire harness and mounting hardware for direct OEM replacement installation.
Custom Dynamics
New

Custom Dynamics, Shark Demon LED Headlamp unit

#700703

Stock:Yes

Old style side mounted headlamp with a strong reference to the 50's and 60's style headlamp designs, where the speedo was incorporated in the headlamp shell. This Vintage headlamp comes with 60mm speedo mounting hole in the rear section of the headlamp housing. - Chrome housing with chrome trim ring - With 55/60W H-4 bulb - ECE approved lens - 60mm speedometer hole. Note: Designed for use with 60mm diameter Velona speedo or tachometers series. See our speedo chapter. Note: For an optional style matching fork tube mounted headlamp bracket see 510134 black steel (for 39mm tubes), 510133 polished stainless steel or 510136 black steel (for 41mm fork tubes).
Daytona

Daytona, Vintage 5-3/4" headlamp. Chrome

#900937

Stock:Yes

- Chrome - With HS1 12V 35/35W and position light - ECE approved lens - Housing dimensions: Overalll 125mm ø, housing depth 140mm, glass diameter 100mm
MCS

Nevada 4" stretched ABS headlamp. Chrome

#913704

Stock:Yes

- Black - With HS1 12V 35/35W and position light - ECE approved lens - Housing dimensions: Overalll 125mm ø, housing depth 140mm, glass diameter 100mm
MCS

Nevada 4" stretched ABS headlamp. Black

#913700

Stock:Yes

Reproduction headlamp for restauration purposes. No ECE approval. OEM replacement reference 4901-35C.
MCS

6-1/2" springer headlamp assembly. 6v. Chrome

#516743

Stock:Yes

- Raw cast aluminum with semi-polished ribs. - Ribbed cast aluminum in a retro design to surpass any regular old-time look. Note: 5-3/4" headlamp unit, trim ring and custom bottom mount block must be re-used or purchased separately. Note: Not compatible with LED units.
EMD

EMD, Vitamin A 5-3/4" headlamp housing. Semi-polished

#964876

Stock:Yes

- Black steel housing - Bottom mount - ECE approved lens - With 55/60W H4 bulb and position light Dimensions approx: - Overall diameter105mm - Overall length125mm - Diameter of glass 90mm
MCS

Single 4" H4 position light. Black

#943802

Stock:Yes

Unpainted matte black finish. Headlamp mask, manufactured from ABS plastic, pre-drilled and ready to paint. Works with stock headlamp and wiring. The included CNC machined headlamp brackets lowers the current headlamp position 50mm. Optionally the speedometer / instrument panel can be tucked away under the fairing and installed on the headlamp brackets, still offering an unobstructed view on the instrument panel. With this headlamp fairing kit the long, aggressive look is yours! Note: Will not fit models with upside down forks. Note: This headlamp fairing kit will fit Night Rod models, but in combination with the regular VRSC V-Rod headlamp only. Note: Comes with approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Cult-Werk

Cult-Werk, 'Night Rod style' V-Rod headlamp fairing kit

#963029

Stock:Yes

- Matte black aluminum body - Elongated headlamp shell - With H4 bulb - ECE approved lens - Bottom mount.
MCS

Smoothie 4-1/2" headlamp with peak visor. Black

#900947

Stock:Yes

- Matte black aluminum body - Elongated headlamp shell - With H4 bulb - ECE approved lens - Bottom mount.
MCS

Smoothie 4-1/2" headlamp with round visor. Black

#900944

Stock:Yes

- Hi/Low beam - Position light & Daytime running light bar function - ECE approved lens Approx. dimensions for reference only: - headlamp lens diameter: 146mm - Housing diameter: 156mm - Housing length: 200mm
Daytona

Daytona, Neo Vintage LED headlamp. Black

#562724

Stock:Yes

- Hi/Low beam - Position light & Daytime running light bar function - ECE approved lens Approx. dimensions for reference only: - headlamp lens diameter: 146mm - Housing diameter: 156mm - Housing length: 200mm
Daytona

Daytona, Neo Vintage LED headlamp. Chrome

#562725

Stock:Yes

Made of unpainted black ABS plastic. Comes complete with white sticker, installation hardware and detailed installation instructions.
C-Racer

C-Racer, headlight mask. Gloss black

#950726

Stock:Yes

Unpainted gloss black finish. Includes a custom LED headlamp, the OEM headlamp is not re-used. The custom headlamp remains, like OEM, adjustable. Kit comes with a matte black powder coated CNC laser-cut steel bracket and a high quality ABS plastic mask. Provides a more aggressive look and optically makes the bike lower & longer. Mount holes are pre-drilled and installation is bolt-on to OEM mounting points and compatible with OEM cables and wiring. This comes with approval. Note: No modifications required for installation but the LED headlamp must be soldered to the wiring harness of the original headlamp, connector is different. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Cult-Werk

Cult-Werk, headlamp & mask kit 'NRS style. Gloss black

#942217

Stock:Yes

Low Beam. Black. CNC aluminium machined housing and black aluminum mounting bracket. Great for a dual 12V LED headlamp set-up. These LED projection headlamps offer superior vision, excellent life, and low amperage draw. Perfect for a variation of custom applications. Headlamp housing 79mm (3.1") diameter. Includes installation instructions. Suitable for both left side (UK) and right side (Europe) driving. ECE approved. Note: See 942325 for high beam headlamp.
Koso

KOSO, Hawkeye 79mm LED headlamp. Low beam

#942324

Stock:Yes

Stock headlamp and turn signals are removed. Installs with 4 screws to the headlamp brackets. Complete with a bright LED daylight running light, no low or high beam available with this Flat Track mask. Made of 3mm thick unpainted black ABS plastic. Offers bolt-on installation ease, with minor headlamp re-wiring, but permanent modifications are not required. Comes complete with installation hardware, instructions and how-to installation images. Note: Comes with a daylight running light only.
C-Racer

C-Racer, flat track mask with LED light - Racing. Black

#950980

Stock:Yes