15 of 15 search results

SORT ON:

LED compatible only. Incandescent bulb equipped bikes must must be converted to low power LEDs. 10 strobe patterns selectable through the dial on the module. Module dimensions approx. 4.2" x 1.4" x 0.6". Note: Requires the use of Custom Dynamics® LEDs (or any low power current draw LEDs) in the rear. The use of Incandescent or High-Power LEDs (greater than 300ma) will cause the unit to fail. Note: Fits US models only.
Custom Dynamics

Custom Dynamics Magic Strobes brake light flasher

#567555

Stock:Yes

Applies brake flash/strobe pattern to stock rear brake light. Plug & The Magic Brake Strobe is installed as a simple plug-in connection in the brake wiring. It will give you 9 user selectable strobe patterns, with the turn of a dial. All 9 patterns will work with LED lighting. 84 Watt @12V DC max. power rating. Dimensions: 2.25" x 1.25" x 0.5".
Custom Dynamics

Custom Dynamics, Magic Strobes brake light flasher

#567556

Stock:Yes

Offers 14 different programmable flash modes. Dimensions: 38 mm x 16 mm x 11 mm.
Elektronikbox

Axel Joost Elektronic, Brake 2 Flash module

#567429

Stock:Yes

- Gives running light and brakelight function to rear turn signals - Maintains turn signal function - Load equalizer is built-in allowing the module to work with stock or any custom turn signals - Plug 'n Play installation Note: Module will work with CAN-bus controlled bikes only.
Badlands

Badlands, CAN-bus Illuminator Plug 'n Play

#513458

Stock:Yes

Used to change an EU taillight to US requirements, used when exporting to the US. Most US bikes have a combined taillight/brakelight, where the taillight bulb shines brighter when the brake is applied. The 'Rear Light US' is a micro-controller based module that converts the three signals from separate turn signals and 1 taillight/brakelight into two outputs for a taillight/brake/turn signal combination set-up. For converting an EU-bike to the regulations of the US-market, the Rear Light US is the perfect choice. - Dimensions: 40 mm x 25 mm x 12,5 mm - Body material: ABS with waterproof poured 2k epoxy resin - Input voltage range: 7 - 18 Volt - Connections: Inputs 0.14 mm², Outputs 0.75 qmm - Output power: Max. 21 Watt / Output - Maximum ambient temperature: 80 degree Celsius
Elektronikbox

Axel Joost Elektronik, Rear Light US conversion module

#954149

Stock:Yes

Plug 'n Play for running light, brake light and turn signal functions to new LED taillight and LED rear turn signals. This module has a built-in load equalizer to prevent rapid flashing turn signals. Comes with a new rear fender wiring harness. Complete with installation instructions.
Badlands

Badlands Indian Illuminator for rear LED turn signals

#567564

Stock:Yes

A US to EU taillight converter. This electronic unit will modify the wiring of imported U.S. H-D models, that have a combined turn signal/taillight bulb, to the separate taillight/turn signal as required for approval, or by regional legislation of some EU countries. The Rear Light EU devides the two output wires to 4 separate outputs for up to two parallel wired taillights. Dimensions: 40 mm x 25 mm x 12.5mm. Note: See PDF for detailed instructions Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.
Elektronikbox

Axel Joost Elektronik, Rear Light EU

#567428

Stock:Yes

- Gives running light and brakelight function to rear turn signals - Maintains turn signal function - Load equalizer is built-in allowing the module to work with stock or any custom turn signals - Plug 'n Play installation Note: Module will work with CAN-bus controlled bikes only.
Badlands

Badlands, CAN-bus Illuminator Plug 'n Play

#513457

Stock:No

- Gives running light and brakelight function to rear turn signals - Maintains turn signal function - Load equalizer is built-in allowing the module to work with stock or any custom turn signals - Plug 'n Play installation Note: Module will work with CAN-bus controlled bikes only.
Badlands

Badlands, CAN-bus Illuminator Plug 'n Play

#513456

Stock:Yes

Used to transform your rear turn signals into running, brake & turn signals. Choice of 10 user selectable built in brake light strobe/flash patterns (user can also select no strobe/flash on brake). Additional functions include selectable running light intensities to match the running light brightness of turn signals to center taillight. Ability to apply brake strobe/flash patterns to center taillight only, rear turns only, or rear turns and center taillight. Built in SMART function which allows normal turn signal flash to override the brake strobe/flash when simultaneously braking and turning. Choice of 10 user selectable built in brake light strobe/flash patterns (user can also select no strobe/flash on brake). Additional functions include selectable running light intensities to match the running light brightness of turn signals to center taillight. Ability to apply brake strobe/flash patterns to center taillight only, rear turns only, or rear turns and center taillight. Built in SMART function which allows normal turn signal flash to override the brake strobe/flash when simultaneously braking and turning. Works with LED or regular incandescent light bulbs. Alarm friendly. Note: Does not need a load equalizer. Note: Compatible with CAN-bus wiring system. Note: Fits US H-D models only.
Custom Dynamics

Custom Dynamics, Smart Triple Play unit. US models

#567557

Stock:No

With 40 wide angle super bright Next Generation Genesis LEDs. - Rear fender - 40 red LEDs - Dual intensity LEDs for taillight/brake light
Custom Dynamics
Discontinued

Custom Dynamics, Genesis fender tip insert. With red LEDs

#536433

Stock:No

The Rear Light EU-V is a conversion module for vintage bikes without hazard light / emergency flasher function. It converts the two signals from the original turn signal/brake light combination into four separate outputs for upto 2 (parallel) brake lights/taillights and turn signals. A conversion of an imported US bike to the EU regulations can be done much quicker and more economical. With the brakelight dim function, the brakelight is dimmed to 30 % brightness, only when the brake is not activated. A brakelight flasher function can optionally be activated to show a 3x fast warning flash before it stays lit. - Dimensions: 40 mm x 25 mm x 12,5 mm - Body material: ABS with waterproof poured 2k epoxy resin - Input voltage range: 7 - 18 Volt - Connections: Inputs 0,14 mm², Outputs 0,5 qmm - Output power: Max. 50 Watt / Output - Maximum ambient temperature: 80 degree Celsius
Elektronikbox

Axel Joost Elektronik, Rear Light EU-V conversion module

#954148

Stock:No

black; dark lens; length: 14mm/diameter max 10mm; glass diameter 7,8mm; ECE approved; M5x6.5mm threaded; with Power LED & Extranz lens technology; 12V; with brake and taillight function
Kellermann
SaleBlack Friday

Kellermann Atto® RB Dark taillight ECE

#567483

Stock:Yes

chrome; clear lens; length: 14mm/diameter max 10mm; glass diameter 7,8mm; ECE approved; M5x6.5mm threaded; with Power LED & Extranz lens technology; 12V
Kellermann
SaleBlack Friday

Kellermann Atto® RB taillight chrome ECE

#567480

Stock:Yes

- Plug-in taillight conversion - Laydown / Low Profile styling - Smoke lens - ECE approved lens - Fits stock taillight base - Includes necessary connectors to fit H-D 68296-99A taillight base - OEM replacement reference 67800355
MCS

Laydown LED taillight lens assembly. Smoke lens

#519534

Stock:Yes