17 of 17 search results

SORT ON:

Used to extend the wiring on KOSO 987929, 993831 and 955032 D2 multifunctional speedometer / tachometers. Plug & Play, complete with connectors. Compatible with: - D2 multifunction meter for Harley-Davidson® Baggers (BA080030) - D2 multifunction meter for BA080020 / MCS 987929 and BA080010 / MCS 993831 - D2 multifunction meter for BA080000 / MCS 955032 - Specifications (R= Range U=Unit)
Koso
New

Koso, 12" extension wire for D2 meters

#701719

Stock:Yes

Enables H-D models, equipped with the J1850-bus system, to control instruments and indicator lights. ABE approved. This connector makes the connection between the Motoscope Tiny and the H-D J1850-bus system. A plug & play system since it takes OEM speedo connector. Used in combination with all Motogadget instruments (excl. Motoscope Pro). Note: Model years as mentioned are indications only since H-D mixed and matches systems. Note: Late models come with CAN-bus wiring. These will not fit.
Motogadget

Motogadget, mo.can J1850 XL Deutsch connector

#930321

Stock:Yes

Enables H-D models, equipped with the J1850-bus system, to control instruments and indicator lights. ABE approved. This connector makes the connection between the Motoscope Tiny and the H-D J1850-bus system. A plug & play system since it takes OEM speedo connector. Used in combination with all Motogadget instruments (excl. Motoscope Pro). Note: Model years as mentioned are indications only since H-D mixed and matches systems. Note: Later models come with CAN-bus wiring. These will not fit.
Motogadget

Motogadget, mo.can J1850 Twin Cam connector

#930320

Stock:Yes

Used when the RPM pulse for the tachometer cannot be detected well or RPM signal is unstable.
Daytona

Daytona, RPM pulse rectifier

#597880

Stock:Yes

Enabels H-D models, equipped with the J1850-bus system, to control instruments and indicator lights. ABE approved. The M-CAN connector connects the Motoscope Speedo and fits straight into the OBD (data link interface/on-board diagnostic port) plug, which is normally used to read-out throuble codes on 04-11 HD-models with 3-pin connector. You will not trigger any trouble codes. Note: Will feed speed, RPM and trouble codes only. Other indicator lights must be taken from the bike's wiring harness. Note: Not compatible with CAN-bus (HD-lan) models.
Motogadget

Motogadget MO.CAN speedo connector

#930190

Stock:Yes

Sub wiring harness to ease wiring installations of the speedometer.
Namz

NAMZ, speedometer sub wiring harness. FXDWG

#900021

Stock:Yes

Black vinyl. With a 12mm speedo nut and a 16mm speedo drive nut. Used with stock tachometers and mini (aftermarket) tachometers with 12-1mm threads. OEM replacement reference 92065-70
Barnett

Barnett, tachometer cable. 32". Black

#570037

Stock:Yes

Used in combination with 991113 '00-03 Custom Face' speedometer with tacho.
Namz

NAMZ, tachometer sub-wiring harness

#900028

Stock:No

Sub wiring harness to ease wiring installations of the speedometer.
Namz

NAMZ, speedometer sub wiring harness. FLHR

#900026

Stock:Yes

Enables H-D models, equipped with the J1850-bus system, to control instruments and indicator lights. ABE approved. This connector makes the connection between the Motoscope Tiny and the H-D J1850-bus system. A plug & play system since it takes OEM speedo connector. Used in combination with all Motogadget instruments (excl. Motoscope Pro). Note: Model years as mentioned are indications only since H-D mixed and matches systems. Note: Late models come with CAN-bus wiring. These will not fit.
Motogadget

Motogadget, mo.can J1850 XL Molex connector

#930322

Stock:Yes

Wiring harness cable with 9 individual strands. Perfect to lengthen the wiring on Motogadget speedometers or other low power electrical installations that require multiple wiring. - 9 x 0.15 mm² square cross section - 0.3A maximum current - 4mm outer diameter - Sold per 2 meter
Motogadget

Motogadget, 9-strand electrical wiring cable

#930336

Stock:Yes

Sub wiring harness to ease wiring installations of the speedometer.
Namz

NAMZ, speedometer sub wiring harness. FXDWG, FLHR

#900024

Stock:Yes

1/8" sponge. OEM replacement reference 67096-87.
James Gaskets

James, seal speedometer drive unit

#580271

Stock:Yes

Black vinyl. With a 12mm on both sides. Used with stock tachometers and mini (aftermarket) tachometers with 12-1mm threads. OEM replacement reference 92065-74
Barnett

Barnett, tachometer cable. 32.5". Black

#570038

Stock:Yes

Enables H-D models, equipped with the J1850-bus system, to control instruments and indicator lights. ABE approved. This connector makes the connection between the Motoscope Tiny and the H-D J1850-bus system. A plug & play system since it takes OEM speedo connector. Used in combination with all Motogadget instruments (excl. Motoscope Pro). Note: Model years as mentioned are indications only since H-D mixed and matches systems. Note: Late models come with CAN-bus wiring. These will not fit.
Motogadget

Motogadget, mo.can J1850 VRSC connector

#930323

Stock:Yes

Sub wiring harness to ease wiring installations of the speedometer.
Namz

NAMZ, speedometer sub wiring harness. Softail

#900016

Stock:Yes

Metal socket. 1 wire. Fits early style speedometers and dashes. Instrument light socket complete with light bulb. Fits speedometers, dashes and various custom applications.
MCS

Speedometer light socket

#940113

Stock:Yes