Motorcycle Storehouse

Select your bike

BIKE SELECTOR

20 of 92 search results

Sort on:

Sort on:

Used to check and adjust front & rear wheel alignment. After the rear wheel has been adjusted to be in line perfectly, the rear wheel can be used as the base to check if wheels are in line with each other. Includes 2 pairs of base mounts, brackets to hold the base mounts, 4 measure scales, 2 lasers and a carrier case. Measurements can be made in 2 minutes.

B.A.T. (Bike Alignment Tool) laser alignment

#500507

Stock:Yes

Precision scale 0.001 mm. ABS function. For high precision outside measurement of small objects.
- Range (mm): 0-25
- A (mm): 7
- B (mm): 28
- L (mm): 32.5
- switch from absolute and relative
- ABS function
- scale 0.001 mm or 0.00005 inch
- carbide measuring faces
- spindle ø 6.5 mm
- with friction ratchet
- DIN 863
- locking lever and adjusting key
- incl. 1.5 V battery (LR44)
- in case

MIB, digital micrometer 0-25mm. ABS function. 0.001 scale

#954324

Stock:Yes

Tool steel, professional workshop quality. Flat 90 degree positioning square / control square for an exact 90° angle with tolerance within DIN 875-00 standards.
- hardened tool steel
- two black burnished, hardened and beveled edges
- DIN 875 grade 00

MIB, positioning square, beveled edge. 150 x 100mm

#954334

Stock:Yes

Flat 90 degree positioning square / control square for an exact 90° angle with tolerance within DIN 875-1 standards.
- Non-hardened regular carbon steel
- DIN 875-1

MIB, positioning square. 200x130mm

#954332

Stock:Yes

Tool steel, professional workshop quality. Flat 90 degree positioning square / control square for an exact 90° angle with tolerance within DIN 875-00 standards.
- hardened tool steel
- two black burnished, hardened and beveled edges
- DIN 875 grade 00

MIB, positioning square, beveled edge. 100 x 70mm

#954333

Stock:Yes

Flat 90 degree positioning square / control square for an exact 90° angle with tolerance within DIN 875-1 standards.
- Non-hardened regular carbon steel
- DIN 875-1

MIB, positioning square. 75x50mm

#954329

Stock:Yes

- Forged steel
- Polished finish
- Square legs
- Hardened points
- DIN 6486

MIB, wing divider, with joint. 250mm long

#954339

Stock:Yes

Replacement for 954346 MIB parallel marking gauge / marking vernier caliper with scribing point

MIB, replacement carbide scribe point

#954346

Stock:Yes

Digital protractor with digital LCD display.
- housing: aluminum
- absolute zero level remains in system
- range: 4 x 90°
- scale: 0.1°
- accuracy 0.2° to 15°, 0.5° from 15° - 90°
- in case

MIB, digital level

#954348

Stock:Yes

With auto lock caliper.
Basic 4-piece measuring device set for use workshop use. Packed in sturdy plastic case with carrying handle to keep tools organized and protected.
Includes:
- 1 x Vernier caliper 150 mm, lock screw, 1/20mm, DIN 862
- 1 x Micrometer 0 - 25 mm, DIN 863
- 1 x Positioning square 100 x 70 mm, DIN 875/1
- 1 x Stainless steel ruler 150 x 13 x 1 mm
- Packed in 25cm wide x 13cm high x 4.5cm deep plastic case.

MIB, measuring tool set. 4-piece

#954359

Stock:Yes

Basic 6-piece measuring device set for use workshop use. Packed in sturdy aluminum case with carrying handle to keep tools organized and protected.
Includes:
- 1 x Vernier caliper 150 mm, 1/20mm. DIN 842
- 1 x Micrometer 0 - 25 mm. DIN 863
- 1 x Positioning square 100 x 70 mm, DIN 875/1
- 1 x Stainless teel ruler 150 x 13 x 1 mm
- 1 x Knife edge straight edge 100 mm, DIN 874/0
- 1 x Spring devider 150 mm
Packed in 38cm wide x 26cm high x 5cm deep aluminum case.

MIB, measuring tool set. 6-piece

#954361

Stock:Yes

- Range (mm): 150
- Accuracy (mm): 0.03
- A (mm): 40
- B (mm): 21
- D (mm): 16
- with autolock
- scale 0.01 mm or 0.0005 inch
- stainless steel, hardened
- 4-way measurement
- DIN 862
- incl. 1.5 V battery (LR44)
- in box

MIB, digital caliper, autolock. DIN 862. 150mm

#954305

Stock:Yes

Elaborate measuring tool set.
Perfect as equipment for workshop or exhibition set.
Packed in sturdy aluminum case with carrying handle.
Case insert is made of padded cellular material, form-cut for the measuring tools.
Case will keep tools well organized and protected.
Includes:
- Aluminium case, 69cm wide x 46cm high x 12cm deep
- Digital caliper 300 mm
- Caliper 300 mm
- Digital caliper 150 mm
- Depth base 75 mm
- Small univ. dial support
- Digital depth caliper 200 mm
- Depth caliper stainless 200 mm
- Univ. test indicator 0.8 mm x 0.01 mm
- Inside micrometer 5 - 30 mm
- Digital micrometer 0 - 25 mm
- 0 - 25 mm Micrometer 0 - 25 mm
- Dial indicator 10 mm x 0.01 mm
- Marking vernier caliper 200 mm
- Small dial indicator Ø 40 mm, 5 x 0.01 mm
- Magnetic Dial support, 280 mm, 60 kg
- Carbide scribe 150 mm
- Scribe 250 mm, double points
- Knife edge straight edge 100 mm
- Steel marking gauge 200 mm
- Stainless steel ruler 300 x 13 x 0.5 mm
- Positioning square with beveled edge 100 x 70 mm
- Jet gauges, 16 pcs/set, 1.5 - 3 mm
- Jet gauges, 20 pcs/set, 0.45 - 1.50 mm
- Screw pitch gauges, 24pcs/set, 0.25 - 6 mm
- Screw pitch gauges, 58pcs/set, 0.25 - 28 mm
- Protractor 150 x 120 mm
- Feeler gauges, 20 pcs/set, 0.05 - 1.00 mm
- Radius gauges, 17 pcs/set, 1.0 - 7.0 mm
- Radius gauges, 16 pcs/set, 7.5 - 15.0 mm
- Weight case (filled): 9.6kg

MIB, measuring tool set. 28-piece

#954308

Stock:Yes

For accurate outside measurement of small objects. Supplied with a 'Standard' gauge of 75mm length. This gauge is used to check and set the micrometer for correct measuring. The Standard gauge length is fixed and manufactured, like the micrometers, according to DIN 863.
- Range (mm): 75-100
- A (mm): 15.0
- B (mm): 3.5
- C (mm): 60
- L (mm): 107
- carbide measuring faces, ground and lapped
- scale satin chrome no-glare finish
- ligtweight coated frame
- spindle Ø 6.5 mm
- thread pitch 0.5 mm
- scale 0.01 mm
- with auto-stop ratchet
- accuracy DIN 863
- in case

MIB, outside micrometer, DIN 863. 75-100mm

#954314

Stock:Yes

Basic 6-piece measuring device set for use workshop use. Packed in sturdy aluminum case with carrying handle to keep tools organized and protected.
Includes:
1 x 954358 digital caliper 150 mm,, DIN 842
1 x 954311 micrometer 0 - 25 mm, DIN 863
1 x Positioning square 100 x 70 mm, DIN 875/1
1 x Stainless steel ruler 150 x 13 x 1 mm
1 x Knife edge straight edge 100 mm, DIN 874/0
1 x Spring divider 150 mm
- Packed in 38cm wide x 26cm high x 5cm deep aluminum case.

MIB, measuring tool set. 6-piece

#954362

Stock:Yes

With lock screw vernier caliper.
Basic 4-piece measuring device set for use workshop use. Packed in sturdy plastic case with carrying handle to keep tools organized and protected.
Includes:
- 1 x Vernier caliper 150 mm, auto lock, 1/20mm, DIN 862
- 1 x Micrometer 0 - 25 mm, DIN 863
- 1 x Positioning square 100 x 70 mm, DIN 875/1
- 1 x Stainless steel ruler 150 x 13 x 1 mm
- Packed in 25cm wide x 13cm high x 4.5cm deep plastic case.

MIB, Measuring tool set 4 pieces

#954360

Stock:Yes

Used for a positive identification of the type and pitch (windings) of threads used on bolts or nuts.
Whitworth threads (BSW, Britisch Standard Whitworth) is an imperial standard developed in 1841 and became the British Standard.
Today you may find this thread on many older (but not all) pre-1970 British motorcycles and cars.
- Threads: Whitworth
- Degree: 55 degrees
- Number of blades: 28
- Pitch: 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 36, 40, 48, 60, 62

MIB, bolt thread pitch gauge. Whitworth threads 4-62

#954351

Stock:Yes

Stainless steel. Used to measure the thickness of brake rotors.
The black inserts on the jaws allow you to search for the thinnest point for an accurate brake disc thickness.
Caliper can be removed from the disc without losing the measurement.
- 'Always Ready' non-digital design.
- Measurement range: 0 to 60mm
- Height: 8mm
- Width: 87mm
- Length: 175mm
- Weight: 226 grams

Sonic, vernier caliper for brake discs

#954082

Stock:Yes

- Range: 150mm
- Accuracy: 0.05mm (1/20mm)
- A: 100mm
- B: 3mm
- D: 8mm
- Stainless steel
- Scale and nonius satin chrome finished
- Nonius 1/20 mm (0.05mm)
- DIN 862
- In case

MIB, dept vernier caliper. 150mm

#954309

Stock:Yes

Used to simulate the sprocket shaft side of a flywheel so that the flywheel lateral end play can be measured and adjusted through the Timken (sprocket shaft) bearing set.

MCS, main bearing end play tool

#925560

Stock:Yes