BIKE SELECTOR

20 of 120 search results

Sort on:

Note: Special Order Product only. To order please contact your MCS sales representative. Handcrafted from AISI 304 stainless steel. For racing use, without catalyst. Not approved for road use.
Zard

Zard, Decat Racing 2-1 head pipes. Stainless Steel

#708481

Stock:No

Note: Special Order Product only. To order please contact your MCS sales representative. Handcrafted from titanium. For racing use, without catalyst. Not approved for road use.
Zard

Zard, Decat Racing 2-1 head pipes. Titanium

#708479

Stock:No

This Racing (no cat) 60mm mid-pipe is optionally available to replace the stock mid-pipe (with catalytic converter) and give the bike its full power. Not street legal, for racing use only. Note: It is required to remap the stock ECE or a free programmable EC must be installed to correct fuel/air ratio. This is not available from Motorcycle Storehouse.
V Performance

V Performance, Racing Mid-Pipe. Without catalytic converter

#708891

Stock:No

1-3/4" diameter. S-pipe, 4-piece system. Swingarm & rigid frames. Kickstart, mousetrap ok. 4-piece. Incl. Paughco 725E1 mount bracket. Heatshield crossover 903572, rear 903656. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Paughco

Paughco, Crossover head pipes. Chrome

#902245

Stock:Yes

Popular classic conversion. Takes all mufflers with stock 1-3/4" inlet. Heatshield front 906457, front lower 902392, rear 903537. Note: Heatshields must be ordered separately when required.
Paughco

Paughco, 2 into 1 head pipes. Chrome

#902290

Stock:Yes

Popular classic conversion. Takes all mufflers with stock 1-3/4" inlet. Heatshield front 906457, front lower 902392, rear 903537. Note: Heatshields must be ordered separately when required.
Paughco

Paughco, 2 into 1 head pipes. Chrome

#902394

Stock:Yes

Popular classic conversion. Takes all mufflers with stock 1-3/4" inlet. Heatshield front 903577, front lower 902392, rear 903536. Note: Heatshields must be ordered separately when required.
Paughco

Paughco, 2 into 1 head pipes. Chrome

#902285

Stock:Yes

Popular classic conversion. Takes all mufflers with stock 1-3/4" inlet. With welded-on bracket on front pipe. Incl. 568736 hanger bracket for use with P-clamps. Heatshield, front 903469, rear 903414. Note: Heatshields must be ordered separately when required.
Paughco

Paughco, 2 into 1 head pipes. Chrome

#902293

Stock:Yes

Chrome. 1-3/4" head pipes. If so desired mufflers can be mounted. Rear pipe wraps close around the oil tank and becomes upswept. Heatshield front 903483, rear 903498.
Paughco

Paughco, Upswept head pipes. S-pipe - around oil tank

#905199

Stock:Yes

Chrome. 1 3/4" head pipes. If desired mufflers can be mounted. Rear pipe wraps close around the oil tank and becomes upswept. Rigid frame. Kick & E-start with wrap-around oil tank. Not compatible with mechanical brakes. Rear heatshield 903398.
Paughco

Paughco, Upswept head pipes. S-pipe - around oil tank

#902371

Stock:Yes

S-pipe, 4-piece. swingarm frame, kick & e-start. Heatshield crossover 903481, left rear header 903573. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Paughco

Paughco, Crossover head pipes. Chrome

#902250

Stock:Yes

S-pipe. Popular classic conversion. Takes all mufflers with stock 1-3/4" inlet. With hydraulic brake (swing arm frame models). Kick & e-start. Heatshield rear 903656. Note: Will not fit 48-57 mechanical brake models (rigid frame models). Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Paughco

Paughco, 2 into 1 head pipes (S-pipe). Chrome

#902270

Stock:Yes

Popular classic conversion. Takes all mufflers with stock 1-3/4" inlet. Heatshield front 906457, front lower 902392, rear 903537. Note: Heatshields must be ordered separately when required.
Paughco

Paughco, 2 into 1 head pipes. Chrome

#902291

Stock:Yes

Chrome. S-pipe. 1-3/4" head pipes. Straight Cut. If so desired mufflers can be mounted. The rear pipe first goes down, close over the transmission, before becoming upswept. Rigid frame only, kickstart. Use 508090 and 512595 mount clamps. Heatshield rear 903399. Note: The S-pipe system has a 2-piece front header, like OEM, which is flattened to fit between engine and frame tube for improved ground clearance in right turns. May not fit custom rigid frames that are dimensionally different.
Paughco

Paughco, Upswept head pipes - over transmission

#902225

Stock:Yes

Chrome. 1 3/4" head pipes. If desired mufflers can be mounted. Rear pipe wraps close around the oil tank and becomes upswept. Kickstart or E-start with wrap-around oil tank. Rigid frame. Heatshield rear 903398. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between engine and frame tube for improved ground clearance in right turns.
Paughco

Paughco, Upswept head pipes. S-pipe - around oil tank

#902372

Stock:Yes

Mild steel tubing. 1-3/4" diameter pipes. Comprehensive kit as a base for your own special 'one-off' exhaust system. to allow you to fabricate your own exhaust system. Composed to fit this specific H-D model. Complete as shown.
Paughco

Paughco, 'build your pipe' kit, Panhead

#902691

Stock:Yes

Chrome. 1-1/2" diameter. OEM replica style replacement part. Repl. 1006, 7-41, 65452-41. Note: No warranty on chrome plating or black paint. Note that the black paint is a rust preventative, used during storeage, only.
Samwel

WLA 2-1 replica head pipe set, chrome

#516174

Stock:Yes

Incl. Paughco 725N mount bracket. Heatshield rear 902389, front 906457, front low notched 902392, crossover 906459. Note: Heatshields must be ordered separately when required.
Paughco

Paughco, Crossover head pipes. Chrome

#902265

Stock:Yes

Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Incl. Paughco 725L clamp. Swingarm frame. Kick & e-start. Heatshield right rear snail 903568, left rear header 903573. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Paughco

Paughco, Independent dual head pipes. Chrome

#906450

Stock:Yes

1-3/4" diameter. Incl. Paughco 725M mounting kit. Heatshield crossover 906459, front 903577, front lower 902392, rear 903563. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Paughco

Paughco, Crossover head pipes. Chrome

#902260

Stock:Yes