20 of 35 search results

SORT ON:

Fits 981056 shortshots
Vance & Hines

Vance & Hines, Repl. header front

#981360

Stock:Yes

Standard 1 3/4" diameter, slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Must use 1982 passenger floorboards on 1983/1984 models. Iincl. Paughco 725SP mount bracket. Heatshield front 903539, rear 903542. Note: Heatshields must be ordered separately when required.
Paughco

Paughco, Drag pipes (40"). Chrome

#909969

Stock:Yes

Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Incl. Paughco 725M clamp. Heatshield front 903577, rear 906459, right rear snail 903569. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Paughco

Paughco, Independent dual head pipes. Chrome

#909971

Stock:Yes

Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Incl. Paughco 725N crossover bracket. Heatshield front 906457, rear 906459, snail 906458. Note: Heatshields must be ordered separately when required. Heatshields that are not mentioned are not available. NO HEAT SHIELDS; INCL BRACKET
Paughco

Paughco, Independent dual head pipes. Chrome

#906451

Stock:Yes

Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Incl. mounting hardware. Heatshield lower front no notch 903487, crossover 903481, right rear snail 903571. Note: Heatshields must be ordered separately when required. Heatshields that are not mentioned are not available.
Paughco

Paughco, Independent dual head pipes. Chrome

#906448

Stock:Yes

Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Incl. Paughco 725L clamp. Swingarm frame. Kick & e-start. Heatshield right rear snail 903568, left rear header 903573. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Paughco

Paughco, Independent dual head pipes. Chrome

#906450

Stock:No

Chrome. Comes with true independant dual head pipes for the best possible H-D potato sound. Full length 2 1/2" inch diameter heat shields cover for a massive look and improved heat deflection. The head pipes are 1 3/4", which give best all round performance. Includes mounting hardware.
Cobra

Cobra, True Dual head pipes. Chrome

#915519

Stock:Yes

Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Includes hardware. Heatshield crossover 903481, lower front notched 903484, lower front no notch 903487, right rear snail 903571. Note: Heatshields must be ordered separately when required. Heatshields that are not mentioned are not available.
Paughco

Paughco, Independent dual head pipes. Chrome

#906449

Stock:No

S-pipe. Chrome. 1 3/4" diameter, slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. S-pipe, swingframe, kick & e-start, will not fit large FL battery, slider channels. Heatshield rear 903404. Optional hanger bracket rear: 948457. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Paughco

Paughco, Shotgun drags (40"). Chrome

#909920

Stock:Yes

S-pipe. Standard 1 3/4" diameter, slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. swingarm & rigids, kickstart only, will not fit with large FL battery, slider channels front & rear. Heatshield rear 902806. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Paughco

Paughco, Drag pipes (40"). Chrome

#909924

Stock:Yes

Chrome with full length 2-1/2" diameter heat shields. This head pipe set combines the true dual look with the low down torque benefits of a power port crossover system. The Power Port will improve exhaust scavenging, especially at lower RPM's, which wakes-up torque numbers for real world power.
Cobra

Cobra, independant dual head pipes with power port

#915529

Stock:Yes

Satin black with full length 2-1/2" diameter heat shields. This head pipe set combines the true dual look with the low down torque benefits of a power port crossover system. The Power Port will improve exhaust scavenging, especially at lower RPM's, which wakes-up torque numbers for real world power. Note: This is a dual bung version that offers both 12mm (late) and 18mm (early) O2 sensor threads in the stock location.
Cobra

Cobra, independant dual head pipes w/power port - dual bung

#915530

Stock:No

Chrome. 1 3/4" diameter, slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. Rigid frame, e-start with wrap around oil tank only, slider channels. Heatshield front 902658, rear 903403. Note: Heatshields must be ordered separately when required.
Paughco

Paughco, Shotgun drags (40"). Chrome

#909938

Stock:No

Chrome. 1 3/4" diameter, slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. Swingarm frame, kickstart, e-start with FXE battery, slider channels. Heatshield front 902658, rear 903404. Optional hanger bracket front 948458, rear 948457. Note: Heatshields must be ordered separately when required.
Paughco

Paughco, Shotgun drags (40"). Chrome

#909946

Stock:No

Chrome. Comes with true independant dual head pipes for the best possible H-D potato sound. Full length 2 1/2" inch diameter heat shields cover for a massive look and improved heat deflection. The head pipes are 1 3/4", which give best all round performance. Includes mounting hardware.
Cobra

Cobra, True Dual head pipes. Chrome

#915526

Stock:Yes

S-pipe. Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Incl. Paughco 725L clamp. Swingarm frames. Kick & e-start. Heatshield right rear snail 903568, left rear header 903573. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available. S-PIPE; SWINGARM, E-START ONLY; INCL MLUNT BRACKET
Paughco

Paughco, Independent dual head pipes. Chrome

#906445

Stock:Yes

S-pipe. Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Incl. Paughco 725L clamp. Swingarm frame. E-start. Heatshield right rear snail 903567, left rear header 903574. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.
Paughco

Paughco, Independent dual head pipes. Chrome

#906441

Stock:Yes

S-pipe. Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Incl. Paughco 725E clamp. Rigid & swingarm frames. Kickstart only. Heatshield rear 903562 , right rear snail 903568. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available. S-PIPE, RIGID & SWINGARM; KICKSTART ONLY; INCL MOUNT BRACKET
Paughco

Paughco, Independent dual head pipes. Chrome

#906444

Stock:Yes

Standard 1 3/4" diameter, slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. E-start only. Paughco 718E-1 hanger bracket. Floorboard must be moved for pipe clearance. Heatshield front 902658, rear 903648. Note: Rear pipe will clear the OEM chrome solenoid cover and OEM rear crash bar but will not allow installtion of any kickstarter arm. Note: Heatshields must be ordered separately when required.
Paughco

Paughco, Drag pipes (40"). Chrome

#909961

Stock:Yes

S-pipe. Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Kickstart. Incl. Paughco 725E clamp. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. Heatshields that are not mentioned are not available.
Paughco

Paughco, Independent dual head pipes. Chrome

#908766

Stock:Yes