15 of 15 search results

SORT ON:

12 mm (M12 x 1.25) threaded. Cleans thread in cylinder head from dirt, carbon build-up and metal particles. Used with 5/8" socket or 3/8" drive ratchet wrench.
Lang Tools

Lang, 12mm spark plug thread cleaner

#514465

Stock:Yes

For external threads. Incl. M6x1.0, M8x1.25, M10x1.50, M12x1.50, M12x1.75. Used to restore damaged external threads. This are special threaded restoring dies that ensure a good result and they are safer in restoring threads than using regular thread cutting taps and dies. Regular cutters are sharper and can easily further damage existing threads. Packed in a re-usable clamshell package. USA made. Note: Not suitable for cutting new threads.
Lang Tools

Lang Tools, 5-pc Metric thread restorer die set

#599164

Stock:Yes

For M5, M6, M8 and M10 metric threads. Used to repair damaged or stripped threads in aluminum or steel that are as strong or stronger, than the original threads. Just drill out old threads. Then use the appropriate countersink for a nice beveled edge. Cut threads. Insert the externally threaded insert / threaded bushing. Screw it into place with the insert driver. - Complete set to get the job done - Build Series: K-58 - Diameter of Insert Sleeves: M5 - M10 - Pitch of Insert Sleeves: 08 - 1.0 - Length of Insert Sleeves: 7.6 - 15 - Number of Sleeves: 8x5 - Includes cutting oil - Weight: 2.07kg.
Kukko

Kukko, thread repair set. M5 to M10

#951157

Stock:Yes

Pitches include: SAE Rethread Files (Threads per inch): 9, 10,11, 12, 13, 14, 16, 18, 20, 24, 27, 28 and 32; Metric Rethread File (Millimeters per thread): 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00. Thread restorer files are used to help restore external threads. Just select the right threads per inch or millimeters by using regular file strokes.
Lang Tools

Lang Tools, 3-Piece thread restorer file set

#599161

Stock:Yes

For internal threads. Incl. M6-1.00, M8-1.25, M10-1.50, M12-1.25, M12-1.50, M12-1.75. Used to restore damaged internal threads. This are special threaded restoring taps that ensure a good result and they are safer in restoring threads than using regular thread cutting taps and dies. Regular cutters are sharper and can easily further damage existing threads. Packed in a re-usable clamshell package. USA made. Note: Not suitable for cutting new threads.
Lang Tools

Lang Tools, 6-pc Metric thread restorer tap set

#599167

Stock:No

For home use. Hand tool to quickly clean & restore external threads. Installs to the thread diameter by rotating the knob, after which the tool is rotated around the bolt / stud. Automatically adjusts to the thread pitch since the blades are guided by chasing undamaged sections of the threads. Compatible with M4 to M13 or 5/32" to 1/2" diameter threads. - Economical choice for home use - Single cutting blade, hardened HSS tool steel - Auto guided by existing threads - Removes rust and burrs - Automatically chases good threads to repair / re-groove damaged sections - For any thread diameter, inch or metric from M4 to M13 or 5/32" to 1/2" diameter threads - Hand tool - For any pitch - For right or left-hand threads
Kukko

Nes, ThreadMate™ external thread repair tool

#951184

Stock:Yes

For professional workshop use. Hand tool used to restore up to 60% damaged threads on bolts, studs and other external threaded parts. Comes with special hardened HSS tool steel blades. Installs to the thread diameter by rotating the serrated knob, after which the bolt is rotated in the tool. Automatically adjusts to the thread pitch since the blades are guided by chasing undamaged sections of the threads. Compatible with M4 to M19 or 5/32" to 3/4" diameter threads. - Professional choice for workshop use - Dual cutting blades, hardened HSS tool steel - Auto guided by existing threads - Removes rust and burrs - Automatically chases good threads to repair / re-groove damaged sections - Hand tool - For any thread diameter, inch or metric from M4 to M19 or 5/32" to 3/4" - For any pitch - For right or left-hand threads
Kukko

Nes, outer thread repair tool

#951182

Stock:Yes

Hand tool used to restore up to 60% damaged threads on internal threaded parts. Comes with special hardened HSS tool steel blade. The cutting blade is extended or retracted by rotating the serrated knob. After retracting the blade and inserting the tool, the knob is rotated to extend the cutter into an undamaged part of the threads. Automatically adjusts to the thread pitch since the blade is guided by chasing undamaged sections of the threads. The yellow nylon is used to counteract the forces of the cutting blade and prevent rubbing damage to the internal threads. Compatible with M8 to M11 or 5/16" to 7/16" diameter threads. - Auto guided by existing threads - Removes rust and burrs - Automatically chases good threads to repair / re-groove damaged sections - Hand tool - Hardened HSS tool steel cutting blades - For any thread diameter, inch or metric from M8 to M11 or 5/16" to 7/16" - For any pitch - For right or left-hand threads
Kukko

Nes, inner thread repair tool

#951183

Stock:Yes

For internal threads. 7-pc UNC (coarse threads). Incl. 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12, 5/8"-11. Used to restore damaged internal threads. This are special threaded restoring taps that ensure a good result and they are safer in restoring threads than using regular thread cutting taps and dies. Regular cutters are sharper and can easily further damage existing threads. Packed in a re-usable clamshell package. USA made. Note: Not suitable for cutting new threads.
Lang Tools

Lang Tools, 7-pc UNC thread restorer die set

#599162

Stock:Yes

For external threads. 6-pc UNC (coarse threads). Incl. 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12. Used to restore damaged external threads. This are special threaded restoring dies that ensure a good result and they are safer in restoring threads than using regular thread cutting taps and dies. Regular cutters are sharper and can easily further damage existing threads. Packed in a re-usable clamshell package. USA made. Note: Not suitable for cutting new threads.
Lang Tools

Lang Tools 6-pc UNC thread restorer tap set

#599165

Stock:No

For internal threads. 7-pc UNF (fine threads). Incl. 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18. Used to restore damaged internal threads. This are special threaded restoring taps that ensure a good result and they are safer in restoring threads than using regular thread cutting taps and dies. Regular cutters are sharper and can easily further damage existing threads. Packed in a re-usable clamshell package. USA made. Note: Not suitable for cutting new threads.
Lang Tools

Lang Tools, 7-pc UNF thread restorer die set

#599163

Stock:Yes

For external threads. 6-pc UNF (fine threads). Incl. 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 9/16"-18. Used to restore damaged external threads. This are special threaded restoring dies that ensure a good result and they are safer in restoring threads than using regular thread cutting taps and dies. Regular cutters are sharper and can easily further damage existing threads. Packed in a re-usable clamshell package. USA made. Note: Not suitable for cutting new threads.
Lang Tools

Lang Tools 6-pc UNF thread restorer tap set

#599166

Stock:Yes

Used to restore damaged internal and external threads. Special threaded restoring taps and dies ensure a good result and are safer in restoring threads than using regular thread cutting taps and dies. Regular cutters are sharper and can easily damage existing thread. USA made. Note: Not suitable for cutting new threads. 15-piece Metric restore kit. Contains taps & dies in sizes: M6x1, M8x1.25, M10x1.25, M10x1.50, M12x1.25, M12x1.50 and M12x1.75 & 1x Metric restorer file (8 sizes).
Lang Tools

Lang Tools, thread restorer kit. Metric

#514178

Stock:No

Used to restore damaged internal and external threads. Special threaded restoring taps and dies ensure a good result and are safer in restoring threads than using regular thread cutting taps and dies. Regular cutters are sharper and can easily damage existing thread. USA made. Note: Not suitable for cutting new threads. 48-piece US sizes & Metric sizes restore kit. Contains: UNC & UNF dies in sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8. UNC & UNF taps in sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16. Metric taps & dies in sizes: M6x1, M8x1.25, M10x1, M10x1.25, M10x1.50, M11x1.50, M12x1.25, M12x1.50, M12x1.75 and M14x1.50. 1x Metric & 1x SEA thread restore file (8 sizes).
Lang Tools

Lang Tools, thread restorer kit. Metric & US sizes

#514179

Stock:Yes

Includes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 and 9/16-12. Zinc plated, made from 1027 steel and imported by JIMS as a inexpensive way to functionally clean threads. Note: Not suitable for cutting new threads.
Jims

JIMS, thread chaser tap set

#961459

Stock:Yes