13 of 13 search results

SORT ON:

Zinc plated. Compatible with the 15cm wide 529211 Center Lift only. This is an optional universal frame adapter set that allows use of the 529211 Center Lift to support various bikes that do not have a flat underside or symmetrical frame tubes for a safe lifting action.
Bike-Lift

BIKE-LIFT, frame adapter set

#529212

Stock:Yes

Red powder coated steel. Optional side extension for 529227 Parking Platform. Bolt-on. This side extension is equipped with 1 castor wheel (360 degree rotating wheel) on one side. The other side is bolted to the Parking Platform. With the rear wheel on the Parking Platform and the jiffy / side stand on this Jiffy Platform, balancing the bike during maneuvering is no longer required. Note: To be used with 529227 Parking Platform.
Bike-Lift

BIKE-LIFT, jiffy stand platform

#529228

Stock:Yes

Black rubber; Optional anti-skid mat for universal motorcycle lift use; Dimensions: 33cm x 44.5cm
Bike-Lift

BIKE-LIFT, universal rubber anti-skid mat

#529133

Stock:Yes

Black powder coated. Max load: 750kg; Lift weight: 265kg; Min height: 20cm; Max height: 130cm; Table top: 220cm long x 75cm wide; Table top with side wings: 220 long x 92cm wide; Side wings: 161cm long x 8.5cm wide; Rear slide-away drop gate panel: 60cm long x 36cm wide; Front fold-down pivoting split section: 44.5cm long x 75cm wide; Overall dimensions: 230cm x 92cm; Run-up ramp: 82 x 51cm. Professional scissor style motorcycle lift for workshops. Comes with a 230V electric operated hydraulic pump with a wired remote control for easy & dependable control with built-in magnet for easy storage on the lift. The front fold-down pivoting split section of 44.5cm long x 75cm wide gives front wheel access and a slide-away rear drop gate panel of 60cm long x 36cm wide allows easy access to the rear wheel. Full table top length is 220cm long x 75cm wide without side wings. The side wings are 161cm long x 8.5cm wide and run on both sides over its full non-pivoting length for easy momentary storage of nuts, bolts and other small parts. The lift comes with safety locking positions in 8 different heights and a removable front safety bar to prevent over-shooting the lift when rolling on the bike.
Bike-Lift

BIKE-LIFT Absolute 756 Split motorcycle lift

#577946

Stock:No

Optional hook that can be attached to the side of all Bike-Lift Absolute 756 motorcycle lift models. Hook will slide along the full length of the lift to the bike-specific perfect spot. Provides you with a sturdy attachment for tie-downs. Note: Sliding hook cannot be used when side-wings are installed.
Bike-Lift

BIKE-LIFT, sliding hook

#577949

Stock:Yes

Black powder coated. Max load: 750kg; Lift weight: 260kg; Min height: 20cm; Max height: 130cm; Table top: 220cm long x 75cm wide; Table top with side wings: 220 long x 92cm wide; Side wings: 212cm long x 8.5cm wide; Rear slide-away drop gate panel: 60cm long x 36cm wide; Overall dimensions: 230cm x 92cm; Floor dimensions: 225cm long x 80cm wide x 19.5cm deep; Run-up ramp: 82 x 51cm. Professional recessed scissor style motorcycle lift, designed to be build into the floor of the workshop. Essentially identical to the Absolute 756 - Gate but due to its recessed design the Absolute 756 - Gate Floor offers easier on-off rolling of heavy bikes and the super clean looks in the down position that only recessed lifts can offer. Required built-in floor dimensions: 225cm long x 80cm wide x 19.5cm deep. Comes with a 230V electric operated hydraulic pump with a wired remote control for easy & dependable control with built-in magnet for easy storage on the lift. A slide-away rear drop gate panel of 60cm long x 36cm wide allows easy access to the rear wheel. Full table top length is 220cm long x 75cm wide without side wings. The side wings are 212cm long x 8.5cm wide and run on both sides over its full length for easy momentary storage of nuts, bolts and other small parts. The lift comes with safety locking positions in 8 different heights and a removable front safety bar to prevent over-shooting the lift when rolling on the bike.
Bike-Lift

BIKE-LIFT Absolute 756 Gate Floor motorcycle lift

#577948

Stock:Yes

Red powder coated steel. Width: 46.8cm. Height: 5.9cm. Length: 51cm. Weight: 8.0kg. Max. load: 400kg. Comes with 4 nylon castor wheels (360 degree rotating wheels) enabling easy maneuvering the bike around in very tight spaces as showroom floors or small sheds. Two of these wheels come with a foot-operated brake system for easy on-off bike actions without platform movement. With the optional available Side Extension (MCS 529228) it is possible to maneuver the bike while its parked on the jiffy / side stand so balancing the bike is no longer required. Note: See 529228 for the optional jiffy stand side extension. Note: Do not sit on motorcycles when using the Parking Platform.
Bike-Lift

BIKE-LIFT, parking platform

#529227

Stock:Yes

Red powder coated. Optional for 3-wheeled vehicles; Compatible with all Bike-Lift Absolute 756 motorcycle lift models; Dimensions: 77cm wide x 110cm long
Bike-Lift

BIKE-LIFT run-up ramp extension for 3-wheelers

#529132

Stock:Yes

Stock replacement magnetic wired remote control hand unit; Compatible with 756 - Absolute Split, Gate and Gate Floor motorcycle lifts
Bike-Lift

BIKE-LIFT replacement hand control unit

#577951

Stock:Yes

Black powder coated and zinc plated. Minimum height 8.5cm; Max. height 35cm; Max. lifting capacity 500kg; 15cm wide x 40cm long platform. Small but very capable and a quality mini-lift is an absolute necessity in any professional workshop. With the Bike-Lift name on it you can be assured of high end quality of this versatile center lift. Note 1: Use with a 24mm manual operated wrench only. Air or electric wrenches will damage the lifting threads permanently. Note 2: Be safe. When using the center lift always secure the bike with tie-downs.
Bike-Lift

BIKE LIFT, mechanical motorcycle Center Lift

#529211

Stock:No

Black rubber; Optional anti-skid mat for universal motorcycle lift use; Dimensions: 50cm x 16.5cm
Bike-Lift

BIKE-LIFT, universal rubber anti skid mat

#577950

Stock:No

Black powder coated and zinc plated. Minimum height 8.5cm; Max. height 35cm; Max. lifting capacity 500kg; 25cm wide x 40cm long platform. Small but very capable and a quality mini-lift is an absolute necessity in any professional workshop. With the Bike-Lift name on it you can be assured of high end quality of this versatile center lift. Note: For bikes with a non-flat underside universal frame adapter set is available as 529212. Compatible with the 25cm wide center lift 529211 only. Note 1: Use with a 24mm manual operated wrench only. Air or electric wrenches will damage the lifting threads permanently. Note 2: Be safe. When using the center lift always secure the bike with tie-downs.
Bike-Lift

BIKE LIFT, mechanical motorcycle Center Lift

#529210

Stock:No

Black powder coated. Max load: 750kg; Lift weight: 260kg; Min height: 20cm; Max height: 130cm; Table top: 220cm long x 75cm wide; Table top with side wings: 220 long x 92cm wide; Side wings: 212cm long x 8.5cm wide; Rear slide-away drop gate panel: 60cm long x 36cm wide; Overall dimensions: 230cm x 92cm; Run-up ramp: 82 x 51cm. Professional scissor style motorcycle lift for workshops. Comes with a 230V electric operated hydraulic pump with a wired remote control for easy & dependable control with built-in magnet for easy storage on the lift. A slide-away rear drop gate panel of 60cm long x 36cm wide allows easy access to the rear wheel. Full table top length is 220cm long x 75cm wide without side wings. The side wings are 212cm long x 8.5cm wide and run on both sides over its full length for easy momentary storage of nuts, bolts and other small parts. The lift comes with safety locking positions in 8 different heights and a removable front safety bar to prevent over-shooting the lift when rolling on the bike.
Bike-Lift

BIKE-LIFT Absolute 756 Gate motorcycle lift

#577947

Stock:No