12 of 12 search results

SORT ON:

68-45 drive ratio. This is a bolt-in belt drive kit that will fit inside the OEM primary housing, without much modification. Designed to be used in rear belt drive applications but will also work on models that run rear chains. Comes complete with an E.T.C. ball bearing lock-up clutch clutch assembly with Aramid plates and a sealed primary bearing. Note: See 518911 for the Aramid, replacement belt 138t., 8mm, 41mm wide.
Belt Drives Ltd.

BDL, bolt-in elec. start 8mm belt drive kit. Softail

#518889

Stock:Yes

11mm pitch. With idler. Electric start. Comes as pulley & belt kit only. Stock clutch can be re-used. 47-31 drive ratio. Note: Will not fit rear belt drive models. Note: See 512710 for the replacement 1-1/2" 92t. 11mm pitch belt.
Belt Drives Ltd.

BDL, 1-1/2" 11mm primary belt drive kit. Closed. E-start

#506570

Stock:Yes

68-48 drive ratio. This is a bolt-in belt drive kit that will fit inside the OEM primary housing, without much modification. Designed to be used in rear chain drive applications only. Comes complete with an E.T.C. ball bearing lock-up clutch clutch assembly with Aramid plates and a sealed primary bearing. Note: See 518912 for the 130t, 8mm, 42mm wide replacement belt.
Belt Drives Ltd.

BDL, bolt-in elec. start 8mm belt drive kit. Shovelhead

#518913

Stock:No

8mm pitch. Without idler. Kickstart only. Comes as pulley & belt kit only. Stock clutch can be re-used. 61-41 drive ratio. Note: See 970974 for the replacement 1-1/2" wide 8mm 132t. + belt. Note: The difference in belts between 65-78 and 78-83 FL, FX models is due to a minor difference in primary housing length. Available belts are therefore designated as a - (minus, slightly shorter / MCS 506915) or + (plus, slightly longer / MCS 970974) belt, although the number of teeth is identical.
Belt Drives Ltd.

BDL, 1-1/2" primary belt drive kit. Closed. Kickstart

#555687

Stock:Yes

68-48 drive ratio. This is a bolt-in belt drive kit that will fit inside the OEM primary housing, without much modification. Designed to be used in rear belt drive applications but will also work on models that run rear chains. Comes complete with an E.T.C. ball bearing lock-up clutch clutch assembly with Aramid plates and a sealed primary bearing. Note: See 518912 for the Aramid, replacement belt 130t, 8mm, 42mm wide.
Belt Drives Ltd.

BDL, bolt-in elec. start 8mm belt drive kit. FXR, FLT

#518893

Stock:Yes

8mm pitch. Without idler. Kickstart only. Comes as pulley & belt kit only. Stock clutch can be re-used. 62-39 drive ratio. Note: See 970974 for the replacement 1-1/2" wide 132t. 8mm belt.
Belt Drives Ltd.

BDL, 1-1/2" primary belt drive kit. Closed. Kickstart

#971000

Stock:Yes

8mm pitch. Without idler. With starter ring gear. Comes as pulley & belt kit only. Stock clutch can be re-used. 61-41 drive ratio. Note: See 970974 for the replacement 1-1/2" wide 8mm 132t. + belt. Note: The difference in belts between 65-78 and 78-83 FL, FX models is due to a minor difference in primary housing length. Available belts are therefore designated as a - (minus, slightly shorter / MCS 506915) or + (plus, slightly longer / MCS 970974) belt, although the number of teeth is identical.
Belt Drives Ltd.

BDL, 1-1/2" primary belt drive kit. Closed. E-start

#555688

Stock:Yes

8mm pitch. Without idler. Kickstart only. Comes as pulley & belt kit only. Stock clutch can be re-used. 62-40 drive ratio. Note: See 970974 for the replacement 1-1/2" wide 8mm 132t. + belt. Note: The difference in belts between 65-78 and 78-83 FL, FX models is due to a minor difference in primary housing length. Available belts are therefore designated as a - (minus, slightly shorter / MCS 506915) or + (plus, slightly longer / MCS 970974) belt, although the number of teeth is identical.
Belt Drives Ltd.

BDL, 1-1/2" primary belt drive kit. Closed. Kickstart

#518566

Stock:Yes

8mm pitch. Without idler. With starter ring gear. Comes as pulley & belt kit only. Stock clutch can be re-used. 61-41 drive ratio. Note: See 506915 for the replacement 1-1/2" wide 8mm 132t. - belt. Note: The difference in belts between 65-78 and 78-83 FL, FX models is due to a minor difference in primary housing length. Available belts are therefore designated as a - (minus, slightly shorter / MCS 506915) or + (plus, slightly longer / MCS 970974) belt, although the number of teeth is identical.
Belt Drives Ltd.

BDL, 1-1/2" primary belt drive kit. Closed. E-start

#518557

Stock:Yes

68-48 drive ratio. This is a bolt-in belt drive kit that will fit inside the OEM primary housing, without much modification. Designed to be used in rear belt drive applications but will also work on models that run rear chains. Comes complete with an E.T.C. ball bearing lock-up clutch clutch assembly with Aramid plates and a sealed primary bearing. Note: See 518912 for the Aramid, replacement belt 130t, 8mm, 42mm wide.
Belt Drives Ltd.

BDL, bolt-in elec. start 8mm belt drive kit. FXR, FLT

#518896

Stock:No

68-45 drive ratio. This is a bolt-in belt drive kit that will fit inside the OEM primary housing, without much modification. Designed to be used in rear belt drive applications but will also work on models that run rear chains. Comes complete with an E.T.C. ball bearing lock-up clutch clutch assembly with Aramid plates and a sealed primary bearing. Note: See 518911 for the Aramid, replacement belt 138t., 8mm, 41mm wide.
Belt Drives Ltd.

BDL, bolt-in elec. start 8mm belt drive kit. Softail, Dyna

#518892

Stock:Yes

8mm pitch. Without idler. Kickstart only. Comes as pulley & belt kit only. Stock clutch can be re-used. 62-39 drive ratio. Note: See 970974 for the replacement 1-1/2" wide 8mm. 132t. + belt.
Belt Drives Ltd.

BDL, 1-1/2" primary belt drive kit. Closed. Kickstart

#518558

Stock:Yes