Parts - Electrical - Wiring

Brand name

27

Segment

5

Pins

19

Material

10

Color

11

Connector plug

7

Style

2

Product type

6

Length

41

Voltage

2

Diameter

19

20 of 1014 search results

Sort on:

SORT ON:

BCM (Body Control Module) 'Power' 2-way connector kit with terminals and wire seals.
OEM replacement reference 69201931

NAMZ, BCM 'Power' connector kit

#701708

Stock:Yes

Engine temperature sensor 'B' 2-way female connector with terminals and wire seals.
OEM replacement reference 69201299

NAMZ, Engine Temp Sensor Female Connector

#701705

Stock:Yes

Fog light harness 4-way male connector with terminals and wire seals.
OEM replacement reference 69202285

NAMZ, fog light harness male connector

#701704

Stock:Yes

CAN terminating 2-way male connector with terminals and wire seals.
OEM replacement reference 69202959

NAMZ, CAN Terminating 2-Position Male Connector

#701703

Stock:Yes

BCM 'C' 32-way connector kit with terminals in (2) gauge sizes.
OEM replacement reference 69201933

NAMZ, BCM 'C' connector kit

#701706

Stock:Yes

Used to install an OEM or aftermarket Wrap Around light bar on a Street Glide or Road Glide Touring model. Comes as a complete Plug & Play quick-disconnect wiring Tour-Pak® installation kit that fits the OEM Tour-Pak® connector. When the main harness is connected under the left side cover or under the seat (based on your year/model) this Tour-Pack harness connection will be positioned at the seat bolt on the rear fender for easy access.
Allows the Tour-Pak® to be easily removed by simply unplugging the (weather-proof) quick-disconnect connector.

NAMZ, Tour-Pack wiring installation kit

#993538

Stock:Yes

Extended wiring harness kit for bikes where wider or higher handlebars are installed.
Incl. handlebar switch and throttle by wire (TBW / e-throttle) wiring extensions.
OEM color coded and pre-attached connectors for stock motorcycles.

NAMZ, throttle by wire & H/B switch extension. +15"

#993537

Stock:Yes

Used as H-D style universal base to re-wire most carbureted OEM H-D models or set up a custom project. Works with any stand alone, Evo or Twin Cam ignition system. Designed to operate with a two-position key switch. A 3-position ignition switch with (car-like) key start can be used with a simple wiring modification. Wiring can be a challenge for a non-specialist, so it is therefore recommend having a professional do the installation.
Includes following:
- Separate wiring allows for the use of white run/amber turn LED’s turn signal functions to the front turn signals
- Run, brake and turn signal functions for the rear turn signals
- OEM color-matching wiring with 22-second self canceling turn signal module
- Fuse block holds a full size, commonly available & replaceable starter relay and (3) ATO fuses
- A 30-Amp circuit breaker is installed and is ready for any regulator/charging system
- Oil, neutral, high beam, and turn signal indicator wiring
- Color matching handlebar switch wiring as found on 1996-1913 non-Touring models
- Headlight wiring with headlight socket and terminals
- Front turn signal connectors and terminals
- Rear fender harness with connectors and terminals
- Key switch wiring with ring terminals
- Coil wire with ring terminals, tachometer, horn, oil sending unit, brake switch and neutral switch wiring with terminals
- Sections of 3/16", 1/4", 3/8" and 1/2" ID heat shrink included
- Heavy gauge 12 (+) power and (-) ground wires with terminals for battery connection
- Includes installation instructions / available as PDF online.

NAMZ, complete custom bike main wiring harness

#701187

Stock:No

BCM (Body Control Module) 'B' 28-way connector kit with terminals in (4) gauge sizes and wire seals.
OEM replacement reference 69201932

NAMZ, BCM "B" Connector Kit

#701707

Stock:Yes

+18" (45cm) longer than stock. 50" (127cm) overall length. Includes left side & right side switch harness, including throttle by wire harness. For models with the late style CAN-bus controlled handlebar switches. Comes with installed OEM connectors and OEM color coded wire. Plug & play installation that replaces the stock, much shorter wiring. Easy to fish-through the bars and will accommodate up to 18" tall handlebars.
- Used when installing higher than stock handlebars
- Included throttle by wire (e-throttle) harness
- Plug & Play
- Installs in minutes
- With installed OEM connectors
- OEM color coded wire
- Professionally assembled
- Loomed in pre-shrunk polyolefin heat shrink and extruded tubing

NAMZ, handlebar switch & throttle wiring extension kit. +18"

#701188

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914925 (warm white) or 988566 (cold white) Dayron DRLs.

NewSaleBlack Friday

Kellermann, wiring harness for Dayron with turn signal

#988570

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914925 (warm white) or 988566 (cold white) Dayron DRLs.

NewSaleBlack Friday

Kellermann, wiring harness for Dayron with turn signal

#988568

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914926 (warm white) or 988567 (cold white) Dayron DRLs.

NewSaleBlack Friday

Kellermann, wiring harness for Dayron without turn signal

#988571

Stock:Yes

This is Kellermann's Technics motorcycle specific wiring set to ease installation of the Dayron DLRs (Daytime Running Lights). One wiring set is used per motorcycle to wire 2 Dayron DRLs.
Used to install 914926 (warm white) or 988567 (cold white) Dayron DRLs.

NewSaleBlack Friday

Kellermann, wiring harness for Dayron without turn signal

#988569

Stock:Yes

115 piece kit. Includes insulated crimp-type terminals with pre-installed adhesive heat shrink tubing.

Standard Co, crimp type heat shrink terminal kit

#951795

Stock:Yes

Stud #6 (3.5mm). For 12-10 gauge (2.5 to 6mm² or 2.05 to 2.59mm diameter) wiring.

Connectors, ring terminal PVC, crimp. Yellow 3.5mm

#951611

Stock:Yes

Stud #6 (3.5mm). For 22-18 gauge (0.50 to 1mm² or 0.64 to 1.02mm diameter) wiring.

Connectors, spade terminal PVC, crimp. Red 3.5mm

#951618

Stock:Yes

Stud # (4.8mm). For 12-10 gauge (2.5 to 6mm² or 2.05 to 2.59mm diameter) wiring.

Connectors, spade terminal PVC, crimp. Yellow 4.8mm

#951623

Stock:Yes

Re fill pack for Standard Co. 951798 heat shrink tubing kit.

Standard Co., ref-fill pack heat shrink. 10x blue 16-14G

#951818

Stock:Yes

On 100 foot (30.48 meters) spool. 18 gauge (0.82mm² or 1.02mm diameter) electrical wire. With Vinyl insulation, will resist abrasion, grease, oil and battery acid. Heat resistant up to 80°C.

Wire on spool, 18 gauge. 100 ft. Yellow

#951716

Stock:Yes